Ctera CloudPlug Manuale dell'operatore
© 2013, CTERA Networks. All rights reserved.
Quick Walkthrough
CTERA CloudPlug
August 2013
Firmware Version 4.0
Safety Precautions
Warning
Carefully read the Safety Instructions and the Installation and Operating
Procedures provided in this User's Guide before attempting to install or operate
the appliance. Failure to follow these instructions may result in damage to
equipment and/or personal injuries, and will void your warranty.
Safety Precautions
This product contains no user-serviceable parts. Repair, maintenance and servicing of this
appliance are only to be carried out by qualified CTERA personnel.
This product may only be used for the applications described in the user guide, and only
in connection with accessories which have been approved by CTERA.
This product can only function correctly and safely if it is transported, stored, set up, and
installed correctly, and operated and maintained as recommended.
Operate this product only from the type of power source indicated on the product’s
marking label.
Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire
insulation, and broken plugs are dangerous. They may result in an electrical shock or fire
hazard.
Route power supply cords so that they are not likely to be walked on or pinched by items
placed upon or against them.
Slots and openings in the enclosure are provided for ventilation, to ensure reliable
operation of the product and to protect it from overheating. Do not block or cover these
openings.
Never place this product near or over a heat source. Do not place this product in a built-in
installation, such as a bookcase or equipment rack, unless you provide proper ventilation.
Never push objects of any kind into this product through openings, as they may touch
dangerous voltage or “short-out” parts, which could result in a fire or electric shock.
To provide added protection for this product during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet.
CAUTION
Refer servicing to qualified service personnel in the following situations:
When the power supply cord or plug is damaged
If objects have fallen into the product
If the product has been exposed to rain or water
If the product has been dropped or the enclosure has been damaged
CTERA CloudPlug Quick Walkthrough 3
Tip
For more detailed information, refer to the CTERA CloudPlug Users Guide,
available at http://www.ctera.com/support.
CTERA CloudPlug Quick Walkthrough 4
Check the Package Contents
Verify that the package contains the following items:
CloudPlug
Ethernet Cable
AC Adaptor
Power Supply Cable
Check Required Items
Verify that you have the following required items (not included):
External USB or eSATA Hard Drive with Cable
Ethernet Switch or Router with DHCP Enabled
Connect the CloudPlug
1Connect one end of the Ethernet cable to the CloudPlug's Ethernet port, and connect the
other end to your Ethernet LAN switch or router.
2Connect a USB or eSATA disk to the CloudPlug.
3Connect the CloudPlug to an AC outlet.
Tip
If a DHCP server is not available, then after one minute, the appliance will use the
IP address 192.168.192.5.
1
Install the CloudPlug
CTERA CloudPlug Quick Walkthrough 5
Windows Vista/7/8
1On a computer connected to the same switch as the CloudPlug, view the network
neighborhood, by doing one of the following:
In Microsoft Windows 7®or Microsoft Windows 8®, click Start > Computer, then click
Network in the left pane.
The CloudPlug is automatically detected using UPnP and appears in the list of network
places.
In Microsoft Windows Vista®, click Start > Network.
The CloudPlug is automatically detected using UPnP and appears in the list of network
places.
2Double-click on the icon named CTERA CloudPlug.
Mac OS
1On a computer connected to the same switch as the CloudPlug, run Safari.
2Open Bookmarks.
3In the Collections pane, select Bonjour.
4In the right pane, expand Webpages.
5Double-click on the name of your appliance .
2
Connect to the CloudPlug Web
Interface
Connect to the CloudPlug Web Interface 2
CTERA CloudPlug Quick Walkthrough 6
Tip
After connecting, you can add a bookmark in your Web browser, for easy access
to the CloudPlug Web interface.
CTERA CloudPlug Quick Walkthrough 7
After connecting to the CloudPlug Web interface, your Web browser displays the
Welcome to CTERA page.
1Choose a user name and password for the administrator.
2Click Save.
The Setup Wizard opens, displaying the Account Details dialog box.
3
Set Up the CloudPlug
Set Up the CloudPlug 3
CTERA CloudPlug Quick Walkthrough 8
3Connect the CloudPlug to the CTERA Portal, by doing the following:
aSelect the Yes, I have a CTERA Portal account check box.
bIn the Portal Address field, type the DNS name of the CTERA Portal.
cIn the Username field, type the user name for your CTERA Portal account.
dIn the Password field, type the password for your CTERA Portal account.
4Click Next.
The Backup Encryption dialog box appears.
5Choose I will provide a secret passphrase. My files cannot be accessed without this
passphrase.
6Click Next.
The Backup Passphrase dialog box appears.
7In the Passphrase and Retype passphrase fields, type the passphrase you want to use for
accessing your files.
Set Up the CloudPlug 3
CTERA CloudPlug Quick Walkthrough 9
Warning
Your passphrase is completely confidential, and CTERA does not retain it online or
offline. It is therefore important to keep this passphrase in a safe place, as there is
no way of retrieving it if you lose it. Without this passphrase, you cannot access
your files.
8Click Next.
The Wizard Completed screen appears.
9Click Finish.
CTERA CloudPlug Quick Walkthrough 10
Tip
The following procedure describes how to install CTERA Agent on Microsoft
Windows. For information on installing CTERA Agent on Linux, refer to the CTERA
Agent User Guide.
1Log in to the CloudPlug Web interface with your administrator user name and password.
2In the My Computers tab, choose CTERA Agent for Windows, then click Install.
The CTERA Agent installer is downloaded to your computer.
3Run the installer and follow the instructions that appear.
CTERA Agent is added to the Windows Start menu, and an icon is added to the Windows
taskbar.
4Click the CTERA Agent tray icon in the notification area of the Windows taskbar.
Tip
In Windows 7, the CTERA Agent tray icon may be hidden. In this case, click on the
white arrow in the notification area of the taskbar to reveal hidden icons:
The Sign In window opens.
5In the Server field, type the CloudPlug's IP address, or type the CloudPlug's host name as
it appears in the Web interface's System > Device Details page.
If your appliance is subscribed to the Dynamic DNS service, enter the appliance DNS name
as it appears in the Services page.
4
Install and Use CTERA Agent
Indice
Manuali Hardware di rete popolari di altre marche
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuale utente
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuale utente
Yudor
Yudor YDS-16 Manuale utente
D-Link
D-Link ShareCenter DNS-320L Manuale utente
Samsung
Samsung ES1642dc Istruzioni per l’uso
Honeywell Home
Honeywell Home LTEM-PV Istruzioni per il montaggio
