Cuizen CBL-1048 Manuale utente

10-SPEED BLENDER

Instruction Manual

Model: CBL-1048

120V/60Hz / 400W

IMPORTANT SAFEGUARDS

PLEASE READ CAREFULLY ALL INSTRUCTIONS BEFORE USING YOUR 10-SPEED BLENDER

This product is intended for use in blending food products.

Do not use this appliance for any other purpose other than intended.

WARNING: Toavoidriskofelectricalshock,burns or injuries, alwaysmakesure the product is

unplugged from the electrical outlet beforedisplacing,servicingorcleaning it.

When using any Blender and toreducetheriskoffire, electricalshock, burns orserious

injury, basic safety precautions should always be followed:

1. Before using this appliance, please check carefully to make sure voltage (AC120V-60Hz) is

compatible with your home and that electrical cord is connected to a properly grounded

electrical outlet of similar voltage. CAUTION: Risk of fire, electric shock, burns or injury if

Blender is not connected as instructed.

2. ALWAYS place appliance on a flat, level and stable surface.

3. Make sure Blender and all controls are in OFF position before inserting plug in electrical

outlet.

4. Do not plug/unplug Blender into/from electrical outlet with wet hands.

5. To disconnect Blender from electrical outlet, pull directly on the plug; do not pull on the

power cord.

6. DO NOT let power cord hang over edge of table or counter or touch any hot surfaces.

7. DO NOT place or use the unit or any parts on or near a hot gas or electric burner, in a

heated oven, or on stove top.

8. This appliance should not be used by or near children, or persons with certain disabilities.

9. Thisproductisequippedwithapolarizedplug(onebladeiswiderthan theother

blade) as a safety feature to reduce theriskofelectricalshock and fire. This plug will fit

intoapolarized outlet only one way. If you are unable toinserttheplugintothe electrical

outlet,tryreversingtheplug. If the plug still does notfit,contact a qualified electrician.

Never use the plug with an extension cord unless the plug canbefully inserted into the

extension cord, making sure the electrical rating of the extension cord is at least as great as

the electrical rating of this appliance (listed on the bottom panel of the unit). Do not alter

plug.Donotattempttodefeatthe safety purpose of the polarizedplug.

10. DO NOT operate this or any other appliance with a damaged cord or plug or after

the appliance malfunctions, has been damaged in any way or if Base/Motor has been

immersed in water or other liquid. Send the unit to the nearest Authorized Service Center

for inspection, repair or adjustment. (ONLY qualified technicians should repair the unit).

11. To avoid risk of electrical shock, fire or injuries: DO NOT immerse in or expose Base/

Motor, electrical cord or plug to water or other liquid.

12. A short power-supply cord is provided to reduce the hazards resulting from entanglement

or tripping over a longer cord. An extension cord may be used with care; however, be sure

the marked electrical rating is at least as great as the electrical rating of this appliance

(listed on the bottom panel of the unit). The extension cord should be positioned such that

it does not drape over the counter or table top where it can be pulled on by children or

tripped over. DO NOT use an outlet or extension cord if the plug fits loosely. DO NOT use

extension cord if electrical cord feels hot.

13. Keep electrical and extension cords away from appliance and any hot parts and surfaces of the

appliance during use.

14. The use of any accessories or attachments (including canning jars) not recommended by the

manufacturer may cause injury.

15. Always use Control Buttons to operate unit.

16. CAUTION: Keep hands and utensils out of Pitcher while blending. DO NOT attempt to

dislodge food when Blender is in operation or plugged in. A spatula/scraper may be used but

ONLY when blender is not running and unplugged.

17. Blender contains exposed sharp metal blades. Use EXTREME CAUTION when handling and

cleaning metal blades.

18. When Hot Liquid is in Blender, use EXTREME CAUTION when removing Lid. DANGER:

STEAM ESCAPING FROM BLENDER CAN CAUSE BURNS, SCALDING & SERIOUS INJURIES.

19. ALWAYS operate blender with cover in place. NEVER remove Lid when Blender is in

operation.

20. When blending hot liquids, DO NOT remove center piece of two-piece cover.

21. DO NOT move this or any appliance containing HOT food, liquid or other.

22. Avoid contact with moving parts.

23. Make sure Blender is in OFF position and unplugged before adding or removing parts.

24. Do not attempt to place the Pitcher onto the Base while the motor is running. Do not attempt

to remove the Pitcher from the Base while the motor is running.

25. Attach Blades to the Pitcher correctly before putting Pitcher onto Base. To reduce the risk of

injury, never place Blades on Base without Pitcher properly attached.

26. After operating continuously for three minutes, wait at least one minute before operating the

product again to help prevent the motor from overheating.

27. Do not run motor while Pitcher is empty.

28. Unplug the unit before handling and cleaning.

29. Unplug power cord from outlet when not in use. Clean and cover the unit and store in a dry

place if not being used for an extended period of time.

30. This appliance is NOT recommended for outdoor use.

31. DO NOT fill Blender more than ⁄ full with food or liquid.

32. If Blender malfunctions during use, shut down unit IMMEDIATELY and discontinue use. DO

NOT attempt to open any part of the base. This product has no user-serviceable parts. Always

contact authorized Service Center if unit malfunctions or for service. DO NOT use or replace

with any unauthorized parts not intended for this unit. All parts for this appliance must be used

according to Instruction Manual. ONLY use manufacturer approved parts from authorized

Service Center. Any other parts or accessories not intended for use with this appliance is strictly

prohibited and will void warranty.

KEEP OUT OF REACH OF CHILDREN. DO NOT LEAVE APPLIANCE UNATTENDED WHEN IN USE

OR WHEN APPLIANCE CONTAINS HOT FOOD OR LIQUID. ALWAYS SUPERVISE CHILDREN

WHEN THEY ARE NEAR APPLIANCE. DO NOT ALLOW CHILDREN TO OPERATE OR BE NEAR THE

APPLIANCE WHEN IN USE. CAUTION: BURNS, INJURY AND/OR FIRE MAY RESULT FROM NON-

COMPLIANCE WITH ALL OPERATING PROCEDURES DESCRIBED IN INSTRUCTION MANUAL.

FOR HOUSEHOLD USE ONLY • NOT FOR COMMERCIAL USE

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

PARTS 1. Lid with Removable Filler Cap

2. Pitcher

3. Silicone Washer

4. Blade Attachment Section

5. Motor Drive Coupling

6. Base / Motor

7. 10-Speed Control Panel

ASSEMBLING BLENDER

CAUTION: To avoid damage to Blender or serious personal injury:

DO NOT operate or plug Blender into electrical outlet until Blender is completely assembled.

Blades are very sharp, handle with utmost care. DO NOT let children touch Blades.

1. Ensure Blender is unplugged from electrical outlet.

2. Place Base on a flat, level & stable surface.

3. Wash Pitcher in hot soapy water and dry.

4. Ensure Silicone Washer is fully in place around base of Blade Attachment Section just

above locking tabs.

5. Insert Blade Attachment Section into bottom of Pitcher and turn clockwise (as indicated

by arrows on bottom of Blade Attachment Section) until locking tabs of Blade Attachment

Section have fully locked into place with bottom of Pitcher.

6. Place Pitcher onto Base making sure Motor Drive

Coupling and fittings located on top of the Base/Motor

are aligned.

7. Twist Pitcher counterclockwise until locking tabs of

Base and Pitcher have fully locked into place and

arrows on Base and Pitcher are aligned.

NOTE: To lock Pitcher to Base, place Base with

10-Speed Control Panel facing you. Locate arrow at

the top left of the Base under locking tab. With Pitcher

handle facing on the right side of the Base, twist

Pitcher counterclockwise to align Base arrow with

arrow located on left bottom side of Pitcher, across the

side from the Handle.

8. Place Lid on top of Pitcher and secure it into position.

NOTE: Pitcher handle has a slide release mechanism to hold Lid to Pitcher. Make sure Lid is

always securely in place on top of Pitcher before operating Blender.

OPERATING INSTRUCTIONS

1. Wash ingredients to be blended and cut them into pieces small enough to fit into

Removable Filler Cap Feeding Hole.

2. Once cleaned and cut, add ingredients into Blender through Feeding Hole. NOTE: Pitcher

has a six cup (48 oz. / 1.5 liter) capacity. Do not overload Pitcher. Do not fill more than ⁄

full with food or liquid.

3. After filling the Pitcher with ingredients, secure Lid into position. Plug Blender into a

standard 120-volt AC electrical outlet.

4. Push desired blender speed button “LOW” or “HIGH”, then select function button:

PULSE, BLEND, GRIND, LIQUEFY, ICE CRUSH. Note: Both Blender Speed & Function

buttons must be pushed in or Blender will not operate.

10-SPEED OPTIONS

LOW-SPEED PULSE (Low + Pulse)

STIR (Low + Blend)

PURÉE (Low + Grind)

CHOP (Low + Liquefy)

GRATE (Low + Ice Crush)

HIGH-SPEED PULSE (High + Pulse)

BLEND ( High + Blend)

GRIND ( High + Grind)

LIQUEFY (High + Liquefy)

ICE CRUSH (High + Ice Crush)

CAUTION: Never operate motor for more than a few minutes at a time. Select and depress

Blender speed & function buttons, run for a minute or two, then turn unit “OFF” and allow motor

to cool for a few seconds. Press Blender speed & function buttons again until desired results are

achieved. DO NOT use Blender for blending heavy foods or thick mixtures.

NOTE: PULSE Button can be used for more control during short processing jobs to run Blender

motor at”LOW” or “HIGH” speed. When finished processing ingredients with “PULSE” Button

feature, release “PULSE” Button, then push “OFF” button to turn off Blender.

5. To turn off Blender, press “OFF” Button on the 10-Speed Control Panel.

6. Unplug Blender from electrical outlet when finished blending ingredients, when the

product is not in use, or if leaving unattended. CAUTION: Always unplug Blender from

electrical outlet before assembling, disassembling, or cleaning it.

If Blender motor does not run freely while blending ingredients, perform one or more of the

following steps, as necessary:

1. Press “OFF” Button and add water/liquid to ingredients blending.

2. Press “HIGH” Speed Button then “PULSE” Button for a few minutes until motor blends freely.

3. Press “OFF” Button, unplug Blender from electrical outlet and use a rubber spatula/scraper

to clear the sides of the Pitcher and push the ingredients toward Blades.

4. Reduce the amount of ingredients inside Pitcher.

NOTES

CLEANING AND MAINTENANCE

• DO NOT place Pitcher and Lid into dishwasher or extremely hot water.

• Clean the product immediately after each use.

• DO NOT put your hands in Pitcher while Blades are still attached.

• Disassemble Blender before cleaning by removing: Pitcher from Base, Lid, Blade

Attachment Section from Pitcher.

• Use a small toothbrush (not included) to remove particles of food lodged underneath

Blades.

• Clean exterior surface of Base with a soft, damp cloth and wipe dry.

• DO NOT immerse in or expose Base/Motor, electrical cord or plug to water or other

liquid.

• Do not use abrasive cleaners or scouring pads to clean any parts of the Blender.

• To clean Pitcher, add ¼ teaspoon of liquid soap to Pitcher and fill with warm water. Place

Pitcher on Base and press PULSE Button several times for a few seconds. Remove Pitcher

from Base and rinse Pitcher under running water.

• Dry all product parts thoroughly before storing.

• Store Blender & parts in a clean, dry place with Lid removed from Pitcher.

Distributed by: TelAsia Inc.

Laval (Quebec) Canada H7L 3P6

1-877-895-9995 • www.Cuizen.net

LIMITED ONE (1) YEAR WARRANTY

This appliance is warranted to be free from any manufacturing defects under

normal use and conditions for one (1) year from date of purchase. During that

period, should the appliance fail to operate properly, return the appliance

with your sales receipt to the store where purchased. This product warranty

covers only the original consumer purchase of the product. During the

applicable warranty period, we will repair or replace, at our discretion, any

mechanical or electrical part which proves defective, or replace unit with a

similar or comparable model. This warranty is in lieu of all other warranties and

representation, expressed or implied, and all other obligations or liabilities on

our part.

FOR HOUSEHOLD USE ONLY • NOT FOR COMMERCIAL USE

This limited warranty does not cover normal wear and tear, damages from

improper installation, defects other than manufacturing defects, damages

from misuse, abuse, accident, negligence, alteration, lack of proper care and

maintenance, or incorrect current or voltage. This warranty shall not apply to

any appliance that has been repaired or altered by other than an Authorized

Dealer or Service Center.

If unit malfunctions, do not use the appliance

and contact nearest Authorized Service Center.

Indice

Altri manuali Cuizen Miscelatore

Cuizen

Cuizen CPB-1017 Manuale utente

Manuali Miscelatore popolari di altre marche

ROTOR

ROTOR 1125.201 Manuale utente

Braun

Braun Multiquick 5 Vario series Manuale utente

ARENDO

ARENDO MIRA 305424 Manuale utente

CHEF-BUILT

CHEF-BUILT CCB-3500 Manuale utente

Viconte

Viconte VC-4406 Manuale utente

Oster

Oster BLSTAB-CB0 Manuale utente

HOFFEN

HOFFEN MC-3005 Manuale utente

Black & Decker

Black & Decker BLC18750DM Manuale utente

Sunbeam

Sunbeam 4182 Manuale utente

Bialetti

Bialetti FMX35 Manuale utente

Black & Decker

Black & Decker BL8000 Manuale utente

Duronic

Duronic BL530 Manuale utente

Exquisit

Exquisit MS 3002 wes Manuale utente

Lumme

Lumme LU-KP1891A Manuale utente

Binatone

Binatone HB-735 Manuale utente

Moulinex

Moulinex LM936E10 Manuale utente

Oster

Oster VERSA Manuale di installazione e funzionamento

Ninja

Ninja NN210Q Manuale utente