CUJO CC-710 Scheda tecnica
CC-710
Copyright 2014 Cujo Control. All Rights Reserved.
Product User Guide
with Wireless Remote
Dog Training Collar
1 | w w w . c u j o c o n t r o l . c o m
Contents
Overview ................................................................................................................2
Parts List.................................................................................................................3
Charging the Remote and Receiver .......................................................................4
Fitting the Collar Properly......................................................................................5
Using the Remote...................................................................................................6
Programming the Remote......................................................................................9
Syncing Remote & Receiver .................................................................................11
Using 2 Collars......................................................................................................12
Sleep Mode ..........................................................................................................12
Contact Us............................................................................................................13
2 | w w w . c u j o c o n t r o l . c o m
Overview
Thank you for purchasing your new CC-710 Dog Training Collar. Here at Cujo Control, we strive to
provide the highest quality pet supplies, with a customer support team truly above the rest. As
always, all of our products are backed by our lifetime warranty. If you ever need anything, please
contact us and we will do everything possible to accommodate you.
We are fully committed to your satisfaction and the happiness of your dog. This user guide will
provide you everything you need to get started training your dog correctly and safely. Please read
this guide carefully before using the training collar for the first time.
3 | w w w . c u j o c o n t r o l . c o m
Parts List
What’s In The Box
4 | w w w . c u j o c o n t r o l . c o m
Charging the Remote and Receiver
Both the Remote Control and Receiver (the receiver is the black plastic device connected to the
collar) use lithium batteries that can be recharged. For best results, please charge the remote and
the receiver for 3 hours each before using the first time.
There are 3 bars to show the battery power level. 3 bars means the
remote is fully charged.
To charge the Remote, simply slide the black rubber
cover on the top of the remote to the side, and insert
the charger into the charging hole. Since this is a USB
charger, you can charge the remote from a computer,
or you can charge it from a wall outlet.
To charge the Receiver, simply open the protective rubber cover and insert
the charger into the charging hole. Note: The same charger is used to
charge both the remote and the receiver.
When charging, a red LED light will blink on the receiver to indicate that it is
being charged correctly. When the receiver is fully charged, the light will stop blinking.
5 | w w w . c u j o c o n t r o l . c o m
Fitting the Collar Properly
Step 1 Choosing the Appropriate Length of Contact Points
This is a critical step and is often overlooked. If you don’t have the proper
length Contact Points, the collar won’t work correctly. For smaller dogs, the
short contact points should be used. For larger dogs, or dogs with a heavier
hair coat, you should use the longer contact points.
Step 2 Fit the Collar to your Dog
The collar needs to be placed relatively high on the dog’s neck, usually just a
couple of inches below the ears. The collar should be pretty snug on the dog’s
neck, and it should not dangle. If the collar is too loose, the contact points will
not be touching your dog, and it will not work. A good indicator that the collar
is fit properly is if you can fit two fingers under the collar.
Step 3 Brush Coat and Check Skin Daily
When first using, you should check under the dog's neck to make sure there is
no irritation. It is also a good idea to brush their coat and check their skin daily.
6 | w w w . c u j o c o n t r o l . c o m
Using the Remote
Power Button
Functions
Turns the remote on/off and wakes the remote from sleep mode
To Use
Press and hold the power button for 2-3 seconds to turn the remote on or off. Press
the power button once to awaken remote from sleep mode
7 | w w w . c u j o c o n t r o l . c o m
Collar Tone Button
Functions
Produces an audible beep tone from the collar
To Use
Press the button once to cause the collar to make an audible beep tone. Hold the
button down, and the collar will continue to beep until released. When in
programming mode, this button is used to decrease the value being programmed.
Shock Button
Functions
Produces a shock from the collar
To Use
Press the button once to cause the collar to produce a shock through the metal
prongs. Hold the button down, and the shock will continue until released.
Menu Button
Functions
Let's you choose the collar A, B, or AB. Enters the remote into programming mode.
Used to cycle through program settings.
To Use
Press the button once to select the collar mode. Hold down the button for 2-3
seconds to enter remote into programming mode. Repeat to exit programming
mode. When the remote is in programming mode, pressing the button quickly will
scroll through the features to be programmed.
Vibrate Button
Functions
Produces a vibration from the collar
To Use
Press the button once to cause the collar to produce a vibration through the receiver.
Hold the button down, and the vibration will continue for 5-6 seconds.
8 | w w w . c u j o c o n t r o l . c o m
Remote Tone Button
Functions
Produces an audible beep tone from the remote
To Use
Press the button once to cause the remote to make an audible beep tone. Hold the
button down, and the remote will beep until released. When in programming mode,
this button is used to increase the value being programmed.
Charging Port
Functions
Charges the remote control
To Use
Plug in the USB charger. When the battery indicator shows 3 bars, the remote is fully
charged.
9 | w w w . c u j o c o n t r o l . c o m
Programming the Remote
Enter Program Mode
To program the remote, you must first enter programming mode. To do this, press and hold the
menu button for 2-3 seconds. The remote will beep once and the collar channel (A, B, or AB) will
begin flashing.
First choose which collar channel you want to program. Press the collar tone button or remote
tone button to cycle through the collar channels. Select either A, B, or AB. Select Channel AIf you
only have one collar.
Indice
