Curv CURVWB01 Manuale utente
curv360.co.uk
User Manual
5 Year Warranty
1. Warranty is 5 years from the purchase date.
2. If your product is faulty within the 5 year warranty, please supply us with the complete
warranty details and a proof of purchase at www.curv360.co.uk/warranty
3. If the product has been damaged due to incorrect operation or user damage, this
warranty will be invalid.
Product: Technical Data
Transmitter
Dimensions 67mm (w) - 20mm (d)
Weight 40g
Frequency 433.92MHZ
Signal Distance Outdoors 80m - Indoors 30m (can pass
through walls)
Standby Power 0W
Operating Pressure 350g
Receiver
Dimensions 67mm
Weight 56g
Power Supply 110-240V AC
Plug UK 3 Pin
Standby Power 0.25W
Please Register at:
www.curv360.co.uk/warranty
curv360.co.uk
THE SELF POWERED
WIRELESS DOORBELL
CURVWB01
1 Transmitter/ 1 Receiver
Setup: Re-pairing
Setup: Un-pairing
The doorbell has already been paired and is ready to use. However
when adding or replacing the transmitter you will need to re-pair. One
transmitter can control several receivers or several transmitters can
control one receiver, should you wish to buy additional units.
1.) Press and hold any button, on the side
of the receiver for at least 3 seconds.
2.) Press the transmitter, the receiver will
start to ring.
1.) Press and hold any button, on the side
of the receiver for at least 10 seconds.
Step 3: Install
Option 1
Option 2
1.) Remove the double sided tape
Note: Please ensure that the xing surface, is clean, dry and grease free.
2.) Stick to the wall
1.) Remove the double sided tape
and stick to the wall, secure the
xing with extra screws using the
holes provided
Step 1: Quick Setup
Step 2: Test
When you press the transmitter, the
receiver rings.
When the receiver is plugged in, the
doorbell will ring once
4 volume levels.
Over 30 dierent tunes.
Indice
Altri manuali Curv Accessori
