Cusam CS-200BV-1 Manuale utente
www.cusamintercom.com
0
CODING INTERCOM
USER’S MANUAL
www.cusamintercom.com
1
Contents
Section Description page
Ⅰ、System instruction ------------------------------------------2-6
▲Main Products---------------------------------------------2-3
▲Description of indoor phone-------------------------------4
▲Description of Door station--------------------------------5
▲System features----------------------------------------------6
Ⅱ、Technical parameter-------------------------------------------6
Ⅲ、Code setting--------------------------------------------------7-9
Ⅳ、Use method and problem dealing------------------------10-14
Ⅴ、System schematic and wiring diagram-----------------15-17
Ⅵ、Door station setting order------------------------------------18
Ⅶ、User’s operational order--------------------------------------19
Ⅷ、Wrong code form----------------------------------------------19
Ⅸ、Entrance guard setup instructions-----------------------20-21
Ⅹ、Attentions---------------------------------------------------21-23
www.cusamintercom.com
2
Ⅰ、System instruction
Coding video and audio intercom system mainly consists of
the door station, the module, indoor phones, the power source
and so on, which is extremely suit for the high building.
▲Main Products
Door station
www.cusamintercom.com
3
Indoor phones
www.cusamintercom.com
4
▲Description of indoor phone
Location
Description
Function
1
4″/7″Indoor phone Screen
Identify Visitor
2
Power Light
Indicates Power On
3
Monitor Button
View Picture On Indoor phone
4
Call/Alarm(Alarm may choose )
Button
Activate Alarm
5
Unlock Button
Operate Electric Door Lock
6
Microphone
Speak to Visitor
7
Talk Button
Telephone conversation
8
Brightness
Adjust brightness of Indoor phone
9
Contrast Adjustment
Adjust contrast of Indoor phone
10
Receiver
Listen to Visitor
11
Volume Adjustment
Adjust Volume of Indoor phone
www.cusamintercom.com
5
▲Description of Door station
Location
Description
Function
1
Camera Lens
Sends Picture To Monitor
2
Night Vision Light
(LED Light)
IlluminatesArea In Darkness
3
Speaker
Enables You To Speak To Visitor
4
Door Bell Button
Pressing Gives Ding Dong Sound
5
Microphone
Enables Visitor To Speak To You
www.cusamintercom.com
6
▲ System features
LED inside the door station provides a clear picture even at
night.
It is with all functions and features that video and audio coding
intercom system have
Video indoor phones can be installed with audio indoor phones
together, which is very flexible and convenient.
Ⅱ、Technical parameter
·Working voltage：DC10.8V~16V
·The undistorted power of output:
The main channel: 5mw min
The reply channel: 100mw min
·Frequency response：300~3400HZ±3db
·Environment temperature ：-40℃to +70℃
·Humidity：45% to 95%
·Working current of camera：500mA±20mA
·Camera：1/3″CCD
·Definition：380 TV Line
www.cusamintercom.com
7
Ⅲ、Code setting
1. Press**00,XXXX and enter into the coding state.(the original
password of the manager is 2098)
2. Press **02 to change the coding state into “0”.
3. Using order code **16 to set the number of dialing,it depends on
the floors (If it is over 9 floor,please use mixed dialing. Set code “7”,you
can dial three and four number mixly). Please press "#" to exit
programming.
The quick establishing of the extension phone number:
(Recommendation )
☆The door station provides a quick order "**41" if the room number
encoding method conforms to the rule of table 1, Just do as
follows:press **00, XXXX (manager password), **41, then it will
come to the programming rule as table one does.
☆The door station provides a quick order "**42" if the room number
encoding method conforms to the rule of table 2,
www.cusamintercom.com
8
☆The door station provides a quick order "**43" if the room number
encoding method conforms to the rules of table 3.Use order “**40” to
eliminate the comparative table of the module address and the room
number".
☆The manipulating setting of the extension phone number: press **15
and come up with Y011 after completes steps 1, 2, 3 (Y stands for the
address, the 2nd and 3rd figure stand for the coding site, and the 4th
figure is the room number).Entering three numerals if you want to
revise the address, and press the key "*" if you don’t want to. It’ll show
four numerals after
finishing the above
steps.Please enter
four numerals to
revise (namely
room number),
press "*" if do not
revise (namely
examination), and
then it will demonstrate the next encoding address.
If the four figures have been in table (namely
repetition), and it’ll show the repetitious number
address. Then please enter 0000,that mean you
don't use this address.
☆The module(see the picture in the right corner),
the address of module ranges from 0101 to 9904.
www.cusamintercom.com
9
Namely the coding sites are 01 to 99 (namely floors are 01 to 99),
room number are 01 to 04. The first 8,421 is decimal and the latter
8,421 is the single. There are eight pairs of two sides contact pin.
Coding site 01 (the first floor): the block of short-circuits should be
inserted in the single 1 contact pin
Coding site 03 (the third floor): the block of short-circuits should be
inserted in the single 1 and 2 contact pin.
Coding site 06 (the sixth floor): the block of short-circuits should be
inserted in the single 2 and 4 contact pin.
Coding site 19 (the nineteenth floor): the block of short-circuits should
be inserted in the single 1 and 8 and decimal 1 contact pin.
The room number 01-04 should be inserted in R01, R02, R03, R04
accordingly.
(for example) If the room number you want is 1301, insert the block
of short-circuits to the single 1 and 2 and decimal 1,and the room number
cut over to R01 then. The comparative table of room number and module
address, see details in 6,and 7 pages,
Questo manuale è adatto per i seguenti modelli
5
Indice
Altri manuali Cusam Sistema di interfono
