Cyber Suite LED Keypad Manuale utente
LED Keypad
User Manual
CyberSuite™ LED Keypad User Manual
CONTENTS
INTRODUCTION...................................................... 1
OPERATION ............................................................ 2
USER CODES ........................................................... 5
SETUP LOGIN.......................................................... 6
USER SETUP OPTIONS ............................................ 7
PROGRAMMING USER CODES.......................................................7
MODIFYING USER OPTIONS .........................................................9
USER CARD NUMBERS.................................................................13
TROUBLE CONDITIONS......................................... 14
ARMING/DISARMING........................................... 16
EXIT DELAY ...............................................................................16
DISARMING ...............................................................................16
REGULAR ARMING ......................................................................17
STAY ARMING ............................................................................17
FORCE ARMING..........................................................................18
BYPASSING ZONES.....................................................................19
ONE KEY ARMING .......................................................................20
SPECIAL FEATURES............................................... 21
ALARM MEMORY .........................................................................21
CHIME ZONES............................................................................22
DISABLE AUDIBLE OUTPUT ..........................................................22
MESSAGES ................................................................................23
PANIC ALARM.............................................................................23
FIRE ALARM...............................................................................24
CONFIGURATION.................................................. 25
ZONE DESCRIPTION....................................................................25
FIRE ZONE.................................................................................25
ONE KEY ARMING .......................................................................26
PANIC KEYS...............................................................................26
TIMERS.....................................................................................27
USERS ......................................................................................27
CyberSuite™ LED Keypad
User Manual
1
INTRODUCTION
Your suite has been equipped with the CyberSuite™
Security System. The CyberSuite™ Security System will
give you peace of mind by providing reliable security
protection.
The CyberSuite™ System is an advanced technology
security system specifically designed to enhance the
functionality of condominium and apartment security with
flexible local monitoring and offsite communication.
The elegant and user friendly CyberSuite™ Keypad
maintains complete control of your residence providing easy
to understand information.
All the actions performed in your security system will be
executed and displayed through the CyberSuite™ keypad.
Therefore, before using your CyberSuite™ security system,
we highly recommend you read this manual carefully and
have your property manager explain basic system operation
to you.
Please consult the configuration section on page 25 to find
out how your system is configured. Some features may not
be available depending on your system configuration.
CyberSuite™ LED Keypad User Manual
2
OPERATION
The following section provides you with information on how
to use the CyberSuite™ keypad.
When the text [USER CODE] is shown this
indicates that you are required to enter your
user code. The default Master Code to gain
access to your system is . This
code MUST be changed, see page 5 for how
to program user codes.
Many of the features and options must be
enabled by the installation company or
property manager. If the feature is not
programmed or an option is not enabled the
system will generate a rejection tone. Refer
to the system configuration tables on page
25.
INDICATOR LIGHTS
The CyberSuite™ LED keypad features three status indicator
lights showing the condition of the CyberSuite™ Security
System.
Bypass Power/Trouble
Install Ready Indicator
Message Armed/Alarm
Figure 1 - Indicator Lights
CyberSuite™ LED Keypad
User Manual
3
Power / Trouble Indicator
FLASHING: There is a trouble condition present. Contact
your building manager or security company for assistance.
ON: the system is powered and operating normally.
OFF: Complete power failure. Contact your building
manager or security company for assistance.
Ready Indicator
ON: The system has all zones closed and is ready to be
armed.
OFF: One or more zones in the system are open and the
system cannot be regular armed.
Armed / Alarm Indicator
FLASHING: The system is in alarm and you need to enter
your user code.
ON: The system is armed and you may enter your user
code to disarm.
Message Indicator
FLASHING: Your building manager or concierge has
attempted to contact you. To clear this indicator, please
follow the instructions in the message section of the user
menu information of this booklet.
OFF: You have no pending requests for contact.
Memory Indicator
ON: An alarm has occured. To view which zone(s) triggered
the alarm, please follow the instructions in the memory
section of the user menu information of this booklet. This
indicator will be cleared the next time you arm your system.
OFF: No alarm memory present.
CyberSuite™ LED Keypad User Manual
4
VISUAL DISPLAY
The CyberSuite™ LED keypad features an easy to use 8
zone display, which in conjuction with the status LED’s
allows you to monitor your system at a glance.
When not using the menu system for programming options
or modifying user accounts, your keypad will display the
status of each programmed zone by lighting the
corresponding number on the display. The 3 status options
shown are:
FLASHING CONTINUALLY: The zone is operating
incorrectly. Contact your building manager or security
company for assistance.
ON: The zone is open.
OFF: The zone is closed.
AUDIBLE TONE
When you press a key on the CyberSuite™ LCD keypad a
short audible tone is generated. Other tones are generated
when certain functions are used, you should be familiar with
the following audible tones.
Confirmation Tone
When an operation (arming/disarming) is successfully
entered on the keypad or when the system switches to a
new status/mode, the keypad generates a series of four
audible tones.
Rejection Tone
When the system times out or when an operation is
incorrectly entered on the keypad, it will generate a
continuous audible tone for three seconds.
CyberSuite™ LED Keypad
User Manual
5
USER CODES
User Codes are personal identification numbers that allow
you to enter certain programming modes, arm or disarm
your CyberSuite™ system as well as activate or deactivate
home automation functions. The CyberSuite™ system
supports up to eight user codes.
MASTER CODE
By default User 01 has the master code for your system.
A master code can perform the arm or disarm functions and
modify and delete any user code, change user options and
modify user card numbers. Other users can be given a
master code by enabling User Option 2 for each new master
user. Take care not to disable the master option for all
users, this will prevent any future management of user
codes until a full reset is performed by your security
company.
DURESS CODE
If you are forced to arm or disarm your system, entering
the user code assigned to User 08 will arm or disarm the
system and immediately transmit a silent message (Duress
Code) to the Property Management System or Security
Company.
CyberSuite™ LED Keypad User Manual
6
SETUP LOGIN
Logging Into the Setup Menu
Enter the following keypress sequence to access the setup
menu:
MENU ( ) , [USER CODE]
Example: For the default master user to log in to the setup
menu, the sequence is:
, , , ,
The ARMED status LED will begin to flash once you have
successfully logged in, informing you that you are in
programming mode.
Logging Out of the Setup Menu
To leave programming mode, press the CLEAR key
until the ARMED status LED stops flashing, or do not press
any key for 10 seconds and you will be automatically logged
out.
CyberSuite™ LED Keypad
User Manual
7
USER SETUP OPTIONS
PROGRAMMING USER CODES
Your CyberSuite™ system uses four digit user codes, where
each digit can be any value from 0 to 9. Avoid programming
simple or obvious user codes, such as part of your
telephone number or address and codes such as 1234, 1111
or 1212.
Entering New User Codes or Changing Existing Codes
Each user’s code can be modified with the following
sequence, in which the new user code must be entered
twice to confirm the new code has been entered as
intended.
To program a new code, or modify an existing code
•Enter SETUP LOGIN mode if you have not done so
already (see page 6 for details)
•Enter the following key press sequence:
, , [USER NUMBER] , , [USER CODE] ,
•The ARMED LED will then flash quickly, prompting
you to confirm the user code by pressing:
[USER CODE] ,
Indice
Altri manuali Cyber Suite Tastiera
