CyberData 11187 Manuale utente

2-Port Gigabit Ethernet Switch



Operations Guide

Part #011187

Document Part #930591A

for Firmware Version 1.0.0

CyberData Corporation

3 Justin Court

Monterey, CA 93940

(831) 373-2601

The IP Endpoint Company

CyberData Corporation 930591A Operations Guide

PoE VoIP Intercom Operations Guide 930591A

Part # 011187

This manual and related materials are the copyrighted property of CyberData Corporation. No part of

this manual or related materials may be reproduced or transmitted, in any form or by any means

(except for internal use by licensed customers), without prior express written permission of

CyberData Corporation. This manual, and the products, software, firmware, and/or hardware

described in this manual are the property of CyberData Corporation, provided under the terms of an

agreement between CyberData Corporation and recipient of this manual, and their use is subject to

that agreement and its terms.

DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by

CyberData Corporation, CyberData Corporation makes no representation or warranty, express or

implied, including any warranty or merchantability or fitness for any purpose, with respect to this

manual or the products, software, firmware, and/or hardware described herein, and CyberData

Corporation assumes no liability for damages or claims resulting from any use of this manual or such

products, software, firmware, and/or hardware. CyberData Corporation reserves the right to make

changes, without notice, to this manual and to any such product, software, firmware, and/or

hardware.

OPEN SOURCE STATEMENT: Certain software components included in CyberData products are

subject to the GNU General Public License (GPL) and Lesser GNU General Public License (LGPL)

“open source” or “free software” licenses. Some of this Open Source Software may be owned by third

parties. Open Source Software is not subject to the terms and conditions of the CyberData

Source Software is determined by the terms of the GPL, LGPL, or third party, according to who

licenses that software.

Software or firmware developed by CyberData that is unrelated to Open Source Software is

copyrighted by CyberData, subject to the terms of CyberData licenses, and may not be copied,

modified, reverse-engineered, or otherwise altered without explicit written permission from

CyberData Corporation.

TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are

trademarks of CyberData Corporation. Other product names, trademarks, and service marks may be

the trademarks or registered trademarks of their respective owners.

Technical Support 



The fastest way to get technical support for your VoIP product is to

submit a VoIP Technical Support form at the following website:

http://www.cyberdata.net/support/contactsupportvoip.html



Phone: (831) 373-2601, Ext. 333

Email: [email protected]

Fax: (831) 373-4193

Company and product information is at www.cyberdata.net.

The IP Endpoint Company

Operations Guide 930591A CyberData Corporation

Revision Information

Revision 930591A, which corresponds to design version 1.0.0, was released on January 30, 2013.

CyberData Corporation 930591A Operations Guide

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9. Only use attachments/accessories specified by the manufacturer.

10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

11. Prior to installation, consult local building and electrical code requirements.

CyberData Corporation 930591A Operations Guide

Pictorial Alert Icons

Hazard Levels

Danger: Indicates an imminently hazardous situation which, if not avoided, will result in death or

serious injury. This is limited to the most extreme situations.

Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or

serious injury.

Caution: Indicates a potentially hazardous situation which, if not avoided, could result in minor or

moderate injury. It may also alert users against unsafe practices.

Notice: Indicates a statement of company policy (that is, a safety policy or protection of property).

The safety guidelines for the equipment in this manual do not purport to address all the safety issues

of the equipment. It is the responsibility of the user to establish appropriate safety, ergonomic, and

health practices and determine the applicability of regulatory limitations prior to use. Potential safety

hazards are identified in this manual through the use of words Danger, Warning, and Caution, the

specific hazard type, and pictorial alert icons.

General Alert

This pictoral alert indicates a potentially hazardous situation. This alert will be

followed by a hazard level heading and more specific information about the

hazard.

Ground

This pictoral alert indicates the Earth grounding connection point.

GENERAL ALERT

Operations Guide 930472C CyberData Corporation

Contents

1.0 Installation ............................................................................................... 1

1.1 Features ................................................................................................................... 1

2.0 Checklist ................................................................................................. 1

3.0 Installation .............................................................................................. 2

3.1 Installation Method ................................................................................................... 2

3.2 Desktop or Shelf Installation ..................................................................................... 2

4.0 Powering on the Switch ........................................................................... 2

5.0 Powering on the Switch ........................................................................... 3

6.0 Network Connection ................................................................................ 3

7.0 Technical Specifications .......................................................................... 5

Appendix A The Standard RJ-45 Introduction 6

A.1 The Standard Cable, RJ-45 Pin Assignment .......................................... 7

Appendix B Mounting 8

B.1 Mounting ................................................................................................. 8

Appendix C Typical Installation 9

C.1 Typical Installation ................................................................................... 9

Operations Guide 930591A CyberData Corporation

1.0 Installation

The switch is a three port Gigabit PoE (Power over Ethernet) Repeater Ethernet switch. The switch

is in full compliance with the IEEE802.3 at standard with one PD (Power Device) port and two PSE

(Power Source Equipment) ports.

This switch can work through receiving power from another PoE switch or equipment through the PD

port. The PSE ports can supply power to other PoE devices (30W maximum). The combined power

output from both PSE ports can be up to 30W, but it also depends upon the PD port supply. For

example, if the PD supply port only delivers 15W, then the two PSE ports can only deliver up to

approximately 13W.

The switch will provide a simple, economic standard for high performance GBit network applications

that allows for the splitting/dividing of one PoE network drop. The 2-Port Gigabit Ethernet Switch is

an ideal choice to promote the department and working group performance. The switch provides

simple and understandable LED indicator lights on the front panel, so that you can quickly judge the

working state of the switch and help to diagnose the network failure.

1.1 Features

• Supports PoE IEEE802.3at compliant

• Supports PoE IEEE802.3af compliant

• Support two power source equipment to supply external devices

• Supports IEEE802.3x flow control for full-duplex mode and back pressure for half-duplex mode

• Support ports Auto MDI/MDIX

• 8K entry MAC address table of the switch with auto-learning and auto-aging

• LED indicators for monitoring PD, PSE, Link / Activity

• No external power supply design

2.0 Checklist

Before you start installing your equipment, verify that the package contains the following:

• The Gigabit POE Repeater Switch

• This User Manual

Please notify your supplier immediately if any of the previously items are missing or damaged.

Operations Guide 930591A CyberData Corporation

3.0 Installation

3.1 Installation Method

The site where you install the switch may greatly affect its performance. When installing, please take

the following into consideration.

• Install the switch in a cool, dry place. See technical specifications for the acceptable

temperature and humidity operating ranges.

• Install the switch on a secure, level surface that can support its weight (at least 1Kg).

Alternatively, the switch can be applied to any smooth dry surface using furnished stick-on tape.

• Leave at least 10cm of space at the front and rear of the switch to ensure adequate ventilation.

3.2 Desktop or Shelf Installation

When installing the switch on a shelf on desktop, make sure that the previously mentioned

guidelines in Section 3.1, "Installation Method "are followed for adequate ventilation.

4.0 Powering on the Switch

The switch is powered by your existing central POE Switch. No additional power supply

is required. Simply plug your cable from your central POE switch into the PD port of the

switch and your switch will power on for use.

Figure 1-1. Front Panel of the Switch

Operations Guide 930591A CyberData Corporation

5.0 Powering on the Switch

6.0 Network Connection

Figure 1-3. Front Panel of Switch

Figure 1-2. Powering on the Switch

LED Status Description

PD (Orange) ON Switch has a connection from the PD port to the PSE device.

Power has been successfully applied.

OFF Connection to the PSE device is not present. 

No power has been applied to the switch.

PSE (Orange) ON PD device such as IP phone is connected to the port and

drawing power.

OFF PD device is not connected or no power is being drawn from

the switch.

Link/Act (Green) ON

A valid link

established.

Blink Traffic is present on port.

OFF

link

has been established.

Operations Guide 930591A CyberData Corporation

Connect your devices (computer, router, switch, IP Phone, Wireless Access Point, IP Camera etc.) to

the ports with a CAT-5/CAT-5e/CAT-6 network cable. Since the switch supports Auto MDI/MDI-X, you

can use either a straight through or cross-over network cable.

Figure 1-4. Typical Installation of the Switch

• Connect the switch from the PD port to your central Gigabit PoE Switch.

• Connect your IP Phone from the PSE port on the switch.

• Connect your computer or other networking device to any of the PSE2 ports on the switch.

Altri manuali per 11187

Indice

Altri manuali CyberData Router di rete

CyberData

CyberData 011236 Manuale

Manuali Router di rete popolari di altre marche

Allnet

Allnet ALL0333AU Manuale utente

HomeSeer

HomeSeer HT-SEL Manuale utente

Sercomm

Sercomm Genesis OC3505D Manuale utente

Billion

Billion BIPAC 5102 Series Manuale utente

TP-Link

TP-Link TD-8817 Manuale utente

Motorola

Motorola MR1900 Manuale utente

Digi

Digi IX14 Manuale utente

Cisco

Cisco NCS 540 Manuale

XAVi

XAVi X8821e Manuale utente

BEC

BEC 6200WZL Manuale utente

MikroTik

MikroTik hAP ac3 Series Manuale utente

Korenix

Korenix JetNet 5428G Series Manuale utente

NETGEAR

NETGEAR FS526T - Switch Manuale utente

Korenix

Korenix JetNet 5710G Series Manuale utente

Automated Logic

Automated Logic ZN551 Manuale del proprietario

Cisco

Cisco ASR 1000 Series Manuale dell'operatore

EnGenius

EnGenius ESR-9710 Manuale utente

Cisco

Cisco 805 Series Istruzioni operative e di sicurezza