Cybernet CyberMed N19 Manuale utente
CYBERNET
CyberMed N19
User Guide
i
FCC-B Radio Frequency Interference Statement
This equipment has been tested and found to comply with
the limits for a class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
measures listed below.
•Reorient or relocate the receiving antenna.
•Increase the distance between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•Consult the dealer or an experienced radio/television technician for help.
Notice 1 The changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
Notice 2 Shielded interface cables and A.C. power cord, if any, must be used in order
to comply with the emission limits.
Trademarks
All trademarks are the properties of their respective owners.
Intel® is a registered trademark of Intel Corporation.
PS/2 and OS®/2 are registered trademarks of International Business Machines
Corporation. Windows® 7/Vista/XP/NT/2000/98/95 are registered trademarks of Microsoft
Corporation. Netware® is a registered trademark of Novell, Inc. Award® is a registered
trademark of Phoenix Technologies Ltd. AMI® is a registered trademark of American
Megatrends Inc
ii
Safety Instructions
1. Always read the safety instructions
carefully.
2. Keep this equipment away from
humidity.
3. Lay this equipment on a reliable flat surface before setting it up.
4. The openings on the enclosure are for air convection hence protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
5. Confirm the voltage of the power source and adjust accordingly to 110/220V
before connecting the equipment to the power inlet.
6. Place the power cord in such a way that it cannot be stepped on. Do not
place anything over the power cord.
7. Always unplug the power cord before inserting any add-on card or module.
8. All cautions and warnings on the equipment should be noted.
9. Never pour any liquid into the opening. This will cause damage and/or electrical
shock.
10. Do not disable the protective grounding pin from the plug. The equipment must be
connected to a grounded main socket/outlet.
11. The Optical Storage devices are classified as Class 1 Laser products. Use of
controls or adjustments or performance of procedures other than those specified is
prohibited.
12. Do not touch the Laser lens inside the optical storage drive.
13. If any of the following situations arise, have the equipment checked by authorized
service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment has not worked well or you cannot get it working according to
the User's Guide.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN UNCONDITIONED ENVIRONMENT WITH A
STORAGE TEMPERATURE ABOVE 50° C (122°F). IT MAY DAMAGE THE
EQUIPMENT.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.
iii
Environmental Factors
1. Do not insert objects into the openings in the chassis of the PC; this can result in an
electrical shock.
2. Make sure liquids do not seep into the PC through the back or sides. This can result in
short-circuiting the internal components and/or electrical shock. If water or liquid seeps into
the unit, immediately disconnect the PC from the power source and contact a service
technician for repairs.
3. Do not use the CyberMed N19 in a wet or high-moisture environment.
4. Do not place the CyberMed N19 near heat-generating sources.
5. Do not place the CyberMed N19 in a location where it may come in contact with chemical
fumes, steam or excessive dust.
Ventilation
1. Do not cover or block the openings on the top and back sides of the PC. Inadequate
ventilation may cause overheating and can reduce the lifespan of the PC.
2. Do not place the PC in an enclosed area, such as a built-in shelf. Maintain a minimum
distance of 10 cm (3.9 inches) between the back of the PC and the wall.
Cleaning the Screen
1. Remember to turn off the power source and to unplug the cord from the outlet before
cleaning the PC.
2. It the PC is mounted on a wall or arm, detach it before cleaning it.
3. Moisten a soft cloth with diluted neutral detergent to clean the display screen.
4. Take a dry cloth and wipe the PC dry. Avoid getting water or liquids on the sides or back
of the PC that could damage internal components.
iv
Antimicrobial Coating Test Report:
v
WEEE Statement
(Waste Electrical and Electronic Equipment)
The WEEE directive places an obligation on EU-based manufacturers, distributors,
retailers and importers to take-back electronics products at the end of their useful life. A
sister Directive, ROHS (Restriction of Hazardous Substances) compliments the WEEE
Directive by banning the presence of specific hazardous substances in the products at the
design phase. The WEEE Directive covers products imported into the EU as of August 13,
2005. EU-based manufacturers, distributors, retailers and importers are obliged to finance
the costs of recovery from municipal collection points, reuse, and recycling of specified
percentages per the WEEE requirements.
Instructions for disposal of WEEE by Users in the European Union
The symbol shown below is on the product or on its packaging, which indicates that this
product must not be disposed of with other waste. Instead, it is the user’s responsibility to
dispose of their waste equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment. The separate collection and
recycling of your waste equipment at the time of disposal will help to conserve natural
resources and ensure that it is recycled in a manner that protects human health and the
environment. For more information about where you can drop off your waste equipment
for recycling, please contact your local city office, your household waste disposal service
or where you purchased the product.
vi
TABLE OF CONTENTS
FCC-B Radio Frequency Interference Statement.....i
Environmental Factors............................................iii
WEEE Statement.....................................................v
Introduction..............................................................1
CyberMed N19 Specifications..................................1
CyberMed N19 Specifications, continued................2
CyberMed N19 Series Overview..............................3
Box Contents...........................................................4
On Screen Display Buttons.......................................................................7
On Screen Display Usage .........................................................................7
System Assembly ....................................................9
Orientation of Key Parts..........................................................................10
CyberMed N19 Disassembly...................................................................11
Installing the Memory Module DDR3 SO-DIMM.....................................13
Installing the Hard Disk Drive.................................................................14
Installing the Mini-PCIe Cards (Optional)..............................................15
Installing the Cover..................................................................................16
Cybernet’s e-recycling SOP....................................................................18
CyberMed N19 User Guide
Page 1
Introduction
Thank you for purchasing the CyberMed N19 all in one medical computer. With
antimicrobial coating, a 19-inch display, and the power to run any EMR application, the
CyberMed N19 is perfect for any medical environment.
CyberMed N19 Specifications
Processor Support Intel® Atom D2700 (Cedar Trail-D, Dual Core) 2.13GHz
with 1MB Cache
Chipset Intel® Cedar Trail-D, Intel NM10
Memory Support 2 x SO-DIMM DDR3 1066MHz, up to 8GB
Networking Supports 1 x Gigabit Ethernet by Realtek RTL8111E
Audio 2 internal speakers with 78dB+/-3dB, 3W Speaker with Mic
x 1
Hard Disk Drive Two 2.5” (6.4cm) SATAII Hard Disk Drives (Any Capacity)
Swivel Stand System Base rotates 60 degrees (left/right)
LCD Panel 19-inch TFT LCD panel, 450 nits Brightness, Resolution
1280 x 1024
Touch Screen Single touch resistive
Expansion Slots 2 x Mini-PCI-E Slot (one full, one half)
Right Side Bezel 1 power switch
External I/O Ports DC-In Input: 1xMini Din (DC 19V only)
USB Port: 4 x USB 2.0 (2 ports located right side bezel)
1 HDMI port
1 D-Sub port
1 LAN RJ-45 jack
2 Audio jacks: Mic and Line Out
1 S/PDIF Out
4 TV Tuner ports (optional): COAX cable In, Composite
Video In, Audio left, audio right
Internal I/O Ports 1 LPT port - optional
System Management Desktop Management Interface (DMI)/Preboot Execution
Environment (PXE)
Wake on LAN (WOL)/Advanced Configuration and Power
Interface (ACPI)
CyberMed N19 User Guide
Page 2
CyberMed N19 Specifications, continued:
OS Support Windows 7, Windows 8, Linux (OpenSUSE, Fedora,
Ubuntu)
Power Supply Medical Grade External AC Adapter. DC: 65 watts, AC
Input: 100~240V AC, DC Output: 19V, 3.42A
Color White
Dimensions 43cm (w) x 47.5cm (h) x 25.5cm (d) (with stand)
Weight 9.75 kg with base, 7.10 kg without base
VESA Mounting 75/100 x 75/100 mm
Certifications EN60601-1-1 , EN60601-1-2 ,CE, FCC Class-B, RoHS,
WEEE
Operating Temperature 0ºC ~ 40ºC, 10% ~ 90% RH, non-condensing
Storage Temperature -20ºC ~ 60ºC, 10% ~ 90% RH, non-condensing
CyberMed N19 User Guide
Page 3
CyberMed N19 Series Overview
Front of Unit:
Touch Screen: Model Name:
Touch
Screen
Indice
Altri manuali Cybernet Monitor
