CyberPower MBP63A2 Manuale utente

SMART APP ONLINE

UPS SYSTEM

MBP63A2

INSTALLATION AND OPERATION MANUAL

SAVE THESE INSTRUCTIONS

Please read this manual and follow the instructions for installation and operation.

OFF

Warning: High voltage – Risk of Electric Shock.

Caution - Important Instructions: Must always be followed.

Information, advice, help.

See applicable user manual.

SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important instructions. Please read and follow all instructions carefully during

installation and operation of the unit. Read this manual thoroughly before attempting to unpack,

install, or operate the Maintenance Bypass PDU (MBP).

The SmartApp Online MBP63A2 models that are covered in this manual are intended for installation

in an environment within 32°F to 104°F (0°C to 40°C), free of conductive contaminants.

SPECIAL SYMBOLS

SAFETY INSTRUCTIONS CONT.

PERSONAL SAFETY

CAUTION

CAUTION - To reduce the risk of fire, connect only to a circuit provided with 40

amperes (5,000 VA) /50 amperes (6,000 VA)/60 amperes (8,000 VA)/75 amperes

(10,000 VA) maximum branch circuit overcurrent protection in accordance with

the National Electric Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I,

C22.1.

CAUTION! The MBP must be connected to a grounded AC power outlet with a

fuse or circuit breaker protection. DO NOT plug the MBP into an outlet that is not

grounded.

CAUTION! The MBP should be placed near the connected equipment and easily accessible.

CAUTION! The AC outlet, where the MBP is connected, should be close to the unit

and easily accessible.

Do not work alone under hazardous conditions.

Input circuit breaker must be “OFF” during the building installation.

RISK OF ELECTRIC SHOCK

WARNING! To prevent the risk of fire or electric shock, install in a temperature

and humidity controlled indoor area, free of conductive contaminants. (Please see

specifications for acceptable temperature and humidity range).

WARNING! (No User Serviceable Parts): Risk of electric shock, do not remove

the cover. There are no user serviceable parts inside. Seek service from qualified

service personnel.

To prevent the risk of fire or electric shock, only use the supplied hardware to

attach the mounting brackets.

Remove watches, rings or other metal objects. Use tools with insulated handles.

To prevent the risk of fire or electric shock, install in a temperature and humidity

controlled indoor area, free of conductive contaminants. (Please see specifications

for acceptable temperature and humidity range).

To avoid electric shock, turn off and unplug the unit before installing the input/

output power cord with a ground wire. Connect the ground wire prior to

connecting the line wires!

Connect the Protection Earth (PE) safety conductor before any other cables are connected.

SAFETY INSTRUCTIONS CONT.

PRODUCT SAFETY

RISK OF ELECTRIC SHOCK

Maintenance Bypass PDU (MBP) covered in this document are permanently-

connected equipment and only qualified maintenance personnel may carry out

installations.

Wiring must be done by qualified personnel.

DO NOT USE FOR MEDICAL OR LIFE SUPPORT EQUIPMENT! Under no

circumstances should this unit be used for medical applications involving life

support equipment and/ or patient care.

DO NOT USE WITH OR NEAR AQUARIUMS! To reduce the risk of fire, do not use

with or near aquariums. Condensation from the aquarium can come in contact with

metal electrical contacts and cause equipment to short out.

The unit has a dangerous amount of voltage.

DO NOT INSTALL THE MBP WHERE IT WOULD BE EXPOSED TO DIRECT

SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

DO NOT CONNECT DOMESTIC APPLIANCES SUCH AS HAIR DRYERS TO MBP

OUTPUT SOCKETS!

A readily accessible disconnect device shall be incorporated in the building

installation wiring for AC Input.

Wiring Information: “Use No. 6 AWG, minimum 90°C copper wire and 18 lb-in

Torque force when connecting to AC wiring terminal”.

SAFETY INSTRUCTIONS ............................................................................................................................... II

Special Symbols .......................................................................................................................................................................II

Personal Safety....................................................................................................................................................................... III

Product Safety ........................................................................................................................................................................IV

INTRODUCTION............................................................................................................................................... 1

Maintenance Bypass PDU (MBP)........................................................................................................................................1

Whats In The Box.................................................................................................................................................................... 3

HARDWARE INSTALLATION ........................................................................................................................ 4

Front Panel Description....................................................................................................................................................... 4

Brackets Installation .............................................................................................................................................................. 5

MBP Installation....................................................................................................................................................................... 6

ELECTRICAL INSTALLATION........................................................................................................................ 7

Hardwiring The Input/Output Terminals ........................................................................................................................7

Operations With MBP Detection Cable Installed......................................................................................................12

Operations To Retain EPO & ROO Function .............................................................................................................. 18

TECHNICAL SPECIFICATIONS. .................................................................................................................. 24

PRODUCT REGISTRATION.......................................................................................................................... 25

LIMITED WARRANTY................................................................................................................................... 25

TABLE OF CONTENTS

INTRODUCTION

The CyberPower Maintenance Bypass PDU (MBP) allows the seamless transfer of an electrical

load from UPS power to utility power for uninterrupted operation of connected equipment when

performing maintenance, replacing batteries, or installing a new UPS.

The key features include:

• Power Distribution

Delivers AC power to servers, equipment, and connected devices via a power distribution unit.

• Maintenance Bypass

Qualified personnel can use the bypass feature to disconnect the PDU from the UPS without

disrupting power to connected equipment. This feature allows connected equipment to operate

seamlessly during maintenance periods, battery replacement, or UPS installation.

• Manual Bypass Switch

When the Manual Bypass Switch is turned to Normal, connected equipment is supplied by UPS

output. When the Manual Bypass Switch is turned to Bypass, connected equipment is supplied

by utility power.

• Durable Metal Housing

Protects internal components and resists damage from impact or abrasions within challenging

industrial environments. Also extends the life of the product.

COMPATIBILITY LIST FOR CYBERPOWER UPS

OL5KRTHD, OL6KRTHD, OL6KRT, OL8KRT, OL10KRT, OL6KRTF, OL8KRTF, OL10KRTF

INTRODUCTION CONT.

[NOTE] MBP63A2 Only with compatible CyberPower UPS.

[NOTE] If the UPS model name is OL6KRT/OL8KRT/OL10KRT/OL6KRTF/OL8KRTF/OL10KRTF,

Please check the MCU version* on LCD Panel by the following operations.

1. Press the “ENTER” button to enter the “Main Menu”.

2. Press the “ ▲” and “ ▼” buttons to scroll to the “Information” option.

3. Press the “ENTER” button to select the “Information” submenu.

4. Press the “ ▲” and “ ▼” buttons to scroll through the “Information” submenu to check the MCU version*.

[NOTE] If the MCU version* is UE_V3Rn and the number of n is less than 6,(For Example: MCU Ver.

= UE_V3R5) Please contact CyberPower for assistance to upgrade the MCU version*.

[NOTE]*MCU version is the UPS Firmware version.

[NOTE] If the MBP Detection Cable is not used, the Firmware is not required to be updated.

[NOTE] If MBP Detection Cable is installed, the UPS EPO and ROO functions will be disabled.

[NOTE] If MBP Detection Cable is not installed, the UPS will not automatically transfer to bypass mode.

[NOTE] TO AVOID DAMAGE! Read the MBP User Manual before installation and operation for

correct operating procedures and to avoid lost power load or UPS damage.

[NOTE] If the UPS is equipped with outlets, those outlets can no longer be used, loads can only be

connected to the MBP outlets or the MBP Output terminal blocks.

UPS should be turned off when UPS is doing maintenance, if load connect to UPS outlet, the load

will be lost.

Before turn off UPS, MBP need to set to bypass and keep provide power from utility.

INTRODUCTION CONT.

WHATS IN THE BOX

ITEM CONTENT QTY

1MBP63A2

(Maintenance Bypass PDU) 1

2User’s manual 1

3Registration card 3

4Rackmount brackets 2

5Flat head screws: M4X6L (4) 4

6Pan head screws: M5X8L (4) 4

ITEM CONTENT QTY

7Input/output terminal block cover 2

8Cage nut 4

9MBP detection cable 3.3ft 1

L6-30P power cord 3.3ft with cable

gland for MBP63A2 to 6K UPS output

connection and L6-30R power cord

3.3ft with cable gland for MBP63A2 to

5K/6K UPS input connection

Conduits with internal wires for

MBP63A2 to 6K/8K/10K UPS input

/ output 3ft

1 4 5 6

7 8 9 10 11

2 3

MBP FRONT PANEL DESCRIPTION

HARDWARE INSTALLATION

1. UPS INPUT SWITCH

2. Input/Output terminal blocks connect to UPS

3. “Bypass” Red light LED indicator (Bypass source ready)

4. “Normal” Green light LED indicator ( UPS source ready OK to switch )

5. MAINTENANCE BYPASS SWITCH

6. 20A circuit breaker for L6-20 outlet

7. L6-20 outlet

8. L6-30 outlet

9. 30A circuit breaker for L6-30 outlet

10.Input terminal blocks connect to utility and Output terminal blocks connect to equipment load

11. MBP detection port

9 111 3 4 6 7

2 5 8 10

HARDWARE INSTALLATION CONT.

The MBP can be mounted in a rackmount or vertical tower orientation. Please follow the instructions

below for the respective mounting methods.

1. Brackets installation

Attach the two brackets to the MBP using the provided screws M4X6L*4pcs.

MBP mounted horizontally in a rackmount

MBP mounted vertically in a rackmount

Indice

Altri manuali CyberPower Unità di distribuzione dell'energia

CyberPower

CyberPower PDU31 Series Manuale utente

CyberPower

CyberPower PDU81001 Manuale utente

CyberPower

CyberPower 1U Series Manuale utente

CyberPower

CyberPower PDU83101 Manuale utente

CyberPower

CyberPower PDU31 Series Manuale utente

CyberPower

CyberPower CyberShield CPLI72D48V Manuale utente

CyberPower

CyberPower MBP15A6 Manuale utente

CyberPower

CyberPower PDU15SW8FNET Manuale utente

CyberPower

CyberPower PDU15SW8RNET Manuale utente

CyberPower

CyberPower PDU15B8R Manuale utente

CyberPower

CyberPower PDU81001 Manuale utente

CyberPower

CyberPower PS406UC Manuale utente

CyberPower

CyberPower PDU20BHVIEC8R Manuale utente

CyberPower

CyberPower PDU20BHVT8R Manuale utente

CyberPower

CyberPower PDU15SW8FNET Manuale utente

CyberPower

CyberPower PDU15SW8FNET Manuale utente

CyberPower

CyberPower CyberShield DTC36U12V3-G Manuale utente

CyberPower

CyberPower PowerPanel Business Edition Manuale utente

CyberPower

CyberPower 649532893508 Manuale utente

CyberPower

CyberPower PDU20BHVT8R Manuale utente

CyberPower

CyberPower PDU33 Series Manuale utente

CyberPower

CyberPower 649532893522 Manuale utente

Manuali Unità di distribuzione dell'energia popolari di altre marche

hager

hager SP 015 Manuale utente

Pakedge

Pakedge PowerPak 9 Manuale utente

Pts

Pts 9042 Series Manuale utente

Shure

Shure WA405 Manuale utente

CORNING

CORNING CCH 4U Manuale utente

Panamax

Panamax M4LT-EX Manuale utente

PANCONNECT

PANCONNECT FLAT 3M Manuale utente

Raytheon

Raytheon 138-118 Manuale utente

D&R ELECTRONICS

D&R ELECTRONICS PDU-6SS Manuale utente

Botex

Botex PSA 322-6 DL Manuale utente

GE QuiXtra 4000 Guida rapida

RDL

RDL EZ Series Manuale utente

StarTech.com

StarTech.com RKPW161915 Manuale del sistema

Vertiv

Vertiv Knürr DI-Strip Rack PDU Manuale utente

ABB

ABB PSBS0065 Manuale

Baumuller

Baumuller BFN 3-1-0007-001 Manuale

Eaton

Eaton StructuredWiringSolutions ESWT41600 Manuale

GE GEK-45404F Manuale utente