CyberPower BPSE240V47A Manuale utente

BPSE240V47A

BPSE240V47AOA

User’s Manual

K01-C000048-02

This manual contains important instructions. Please read and follow all

instructions carefully during installation and operation of the unit. Read

this manual thoroughly before attempting to unpack, install, or operate

the Battery modules.

CAUTION! The UPS unit must be connected to a grounded AC

SAFETY

power outlet with fuse or circuit breaker protection. The Battery

modules grounded are through the UPS.

CAUTION! The battery can power hazardous components

inside the unit, even when the AC input power is disconnected.

CAUTION! To prevent the risk of fire or electric shock, install in

a temperature and humidity controlled indoor area, free of

conductive contaminants. (Please see specifications for

acceptable temperature and humidity range).

CAUTION! (No User Serviceable Parts): Risk of electric shock,

do not remove cover. No user serviceable parts inside. Refer

servicing to qualified service personnel.

CAUTION! (Non-Isolated Battery Supply): Risk of electric

shock, battery circuit is not isolated from AC power source;

hazardous voltage may exist between battery terminals and

ground. Test before touching.

CAUTION! Wiring must be done by qualified personnel.

CAUTION! DO NOT USE WITH OR NEAR AQUARIUMS!

To reduce the risk of fire, do not use with or near aquariums.

Condensation from the aquarium can come in contact with

metal electrical contacts and cause the machine to short out.

CAUTION! Do not dispose of batteries in fire as the battery

may explode.

CAUTION! Do not open or mutilate the battery, released

electrolyte is harmful to the skin and eyes.

CAUTION! A battery can present a risk of electric shock and

high short circuit current. The following precaution should be

observed when working on batteries

1. Remove watches, rings or other metal objects.

2. Use tools with insulated handles.

CAUTION! Make sure everything is turned off and

disconnected completely before conducting any maintenance,

repairs or shipment.

CAUTION! Connect the Protection Earth (PE) safety conductor

before any other cables are connected.

DO NOT INSTALL THE UNIT WHERE IT WOULD BE EXPOSED

TO DIRECT SUNLIGHT OR NEAR A STRONG HEAT SOURCE!

SERVICING OF BATTERIES SHOULD BE PERFORMED OR

SUPERVISED BY PERSONNEL KNOWLEDGE OF BATTERIES

AND THE REQUIRED PRECAUTIONS. KEEP UNAUTHORIZED

PERSONNEL AWAY FROM BATTERIES!

The box should contain the following:

Battery Module

Battery Cable

User’s manual

UNPACKING

SCHEMATIC

FRONT/REAR PANEL DESCRIPTION

①.Output Connector: Use this output connector to connect the

Battery module and the Power module.

②.On-board Replaceable Fuse Cover: Replaceable fuse is accessible

from the rear panel. It must be done by qualified personnel.

③.Battery input Terminal Block: Use this input Terminal Block to

daisy chain the next Battery module.

④.Self- locking Frame

Fuse

Battery String 1 Battery String 2

BATT.OUTPUT+

BATT.INPUT+

BATT.INPUT-

BATT.OUTPUT-

BASIC OPERATION

CONNECTION#1: POWER MODULE(UPS) WITH ONE BATTERY

MODULE

Step 1: Connect the Battery Cable to the Power module and ensure

the polarity is right.

Step 2: Loosen the screws to remove the battery cable retention

bracket of the Battery module.

Step 3: Connect the Battery Cable to the Battery module.

Step 4: Rotate the battery cable retention bracket and tighten the

screws to fix battery cable.

CONNECTION#2: POWER MODULE(UPS) WITH MULTIPLE

BATTERY MODULES

Step 1: Loosen the screws to remove the input Terminal Block Cover

of the #1 battery module.

Step 2: Connect the Battery Cable to the battery input Terminal Block

and ensure the polarity is right, then retighten the Block Cover.

Step 3: Loosen the screws to remove the battery cable retention

bracket of the #2 battery module.

Step 4: Connect the #1 Battery module to the #2 Battery module.

#1 #2

Step 5: Rotate the battery cable retention bracket and tighten the

screws to fix battery cable.

Step 6: Connect the #1 Battery module to the Power module. (Refer

to above steps of connection#1)

UPS #1 #2

Model

BPSE240V47A

BPSE240V47AOA

Battery

Sealed Maintenance Free Lead

Acid Battery

12V / 7Ah x20pcs

x2sets

12V / 9Ah x20pcs

x2sets

Rated Battery Voltage

240Vdc

Overload Protection

Fuse

Physical

Maximum Dimensions

(HxWxD) (mm)

718x260x550

Weight (kg)

105

116

Environment

Operating Temperature

0C to 40C

Relative Humidity

0 to 90%(Non-condensing)

For more information, visit www.cpsww.com

TECHNICAL SPECIFICATION

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CyberPower UPS

CyberPower

CyberPower CyberShield CSN27U12V Manuale utente

CyberPower

CyberPower 649532004850 Manuale utente

CyberPower

CyberPower CP1000AVRLCD Manuale utente

CyberPower

CyberPower CP425HG Manuale utente

CyberPower

CyberPower UT650EG Manuale utente

CyberPower

CyberPower UP625 Manuale utente

CyberPower

CyberPower Value 600E-GP Manuale utente

CyberPower

CyberPower EC550G Manuale utente

CyberPower

CyberPower SE425G Manuale utente

CyberPower

CyberPower 649532722037 Manuale utente

CyberPower

CyberPower OLS6000ERT6UA Manuale utente

CyberPower

CyberPower UP425 Manuale utente

CyberPower

CyberPower Value1200EILCD Manuale utente

CyberPower

CyberPower UT1050EG Manuale utente

CyberPower

CyberPower PP800 Manuale utente

CyberPower

CyberPower CPS700AVR Manuale utente

CyberPower

CyberPower CyberShield CS75A12V3 Manuale utente

CyberPower

CyberPower STP3T10KE Manuale utente

CyberPower

CyberPower 649532110001 Manuale utente

CyberPower

CyberPower CyberShield BAS34U24V Manuale utente

CyberPower

CyberPower CPS1500AVR Manuale utente

CyberPower

CyberPower CP685AVR Manuale utente

CyberPower

CyberPower AVR CP850PFCLCD Manuale utente

CyberPower

CyberPower RT650EI Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente

ZincFive

ZincFive BC Series Manuale utente

BPC

BPC 1.5K SMART Manuale utente

IBM

IBM 5595-1AX Manuale utente