CyberPower OLS6000ERT6UA Manuale utente

User’s Manual

OLS6000ERT6UA

OLS10000ERT6UA

Cyber Power Systems, Inc.

www.cyberpower.com K01-C000653-00

IMPORTANT SAFETY INSTRUCTIONS..............................................................................................1

UNPACKING......................................................................................................................................... 3

HARDWARE INSTALLATION ............................................................................................................6

RACKMOUNT INSTALLATION...................................................................................................................... 6

VERTICAL/TOWER INSTALLATION ...........................................................................................................8

OVERVIEW ...................................................................................................................................... 10

POWER MODULE FRONT/REAR PANEL DESCRIPTION................................................................ 10

BATTERY MODULE FRONT/REAR PANEL DESCRIPTION ............................................................

BATTERY MODULE CONNECTION ......................................................................................................... 12

ELECTRICAL INSTALLATION......................................................................................................... 13

POWER WIRES INSTALLATION................................................................................................................ 13

EPO CONNECTION ........................................................................................................................................ 15

UPS SYSTEM STARTUP ................................................................................................................... 16

OPERATION...................................................................................................................................... 17

DISPLAY PANEL .............................................................................................................................................. 17

OPERATING MODES...................................................................................................................................... 18

LCD FUNCTION TREE................................................................................................................................... 20

PARALLEL FUNCTION.................................................................................................................................. 26

TROUBLESHOOTING ...................................................................................................................... 30

BATTERY MAINTENANCE .............................................................................................................. 33

TECHNICAL SPECIFICATIONS....................................................................................................... 34

TABLE OF CONTENTS

This manual contains important instructions. Please read and follow all instructions

carefully during installation and operation of the unit. Read this manual thoroughly before

attempting to unpack, install, or operate the UPS.

Installation

• This is permanently connected equipment, and it must be installed by qualified maintenance

personnel.

• Condensation may occur if the UPS is moved directly from a cold to a warm environment.

The UPS must be absolutely dry before being installed. Please allow an acclimatization time

of at least two hours.

• Do not install the UPS near water or in damp environment.

• Do not install the UPS where it would be exposed to direct sunlight or near heat.

• Do not connect appliances or items of equipment which would overload the UPS (e.g. laser

printers, etc.) to the UPS output.

• Do not block ventilation openings in the UPS’s housing. Ensure allow at least 0.5m of space

on front and rear of the UPS.

• Connect UPS with the earth reliably before connecting to the building wiring terminal, and

external battery source must also be earthed.

• An integral single emergency switching device which prevents further supply to the load by

the UPS in any mode of operation should be provided in the building wiring installation.

• An appropriate disconnect device as short-circuit backup protection should be provided in

the building wiring installation.

• The equipment is powered by two sources: the mains source, the internal battery or the

external battery source.

• With the installation of the equipment, the sum of the leakage current of the UPS and the

connected load does not exceed 5% of rated value of input current.

Operation

• Do not disconnect the main cable on the UPS or the building wiring terminals during

operation since this would remove the protective earth from the UPS and all connected

loads.

• The UPS output terminal block may still be electrically lived from internal current source

(batteries) even if the UPS is not connected to the building wiring terminal.

• In order to fully disconnect the UPS, turn the input breaker in the "OFF" position first, and

then disconnect the mains lead.

• Indiscriminate operation of switches may cause output loss or damage to equipment. Refer

to instruction before conducting any control.

• While the UPS work as a parallel system, the external parallel cable should be reinforced

insulation.

• Ensure that no liquid or other foreign objects can enter the UPS.

IMPORTANT SAFETY INSTRUCTIONS

Maintenance, Servicing and Faults

• Do not remove the enclosure since the UPS operates with hazardous voltages. It is to be

serviced only by qualified maintenance personnel.

• Caution! Risk of electric shock. Even after the unit is disconnected from the mains power

supply (building wiring terminal) components inside the UPS are still connected to the

battery which are potentially dangerous.

• Before carrying out any kind of service or maintenance, isolate UPS and disconnect the

batteries. Verify that no current and no hazardous voltage exists in the capacitor or BUS

capacitor.

• Batteries must be replaced only by qualified personnel.

• Batteries have a high short-circuit current and pose a risk of shock. Take all precautionary

measures specified below and any other necessary measures when working with batteries:

- remove all jewelry, wristwatches, rings and other metal objects

- use only tools with insulated grips and handles.

• When changing batteries, replace with the same quantity and the same type of batteries.

• Do not attempt to dispose of batteries by burning them. It could cause explosion.

• The UPS may be connected to Battery pack. Proper disposal of batteries is required. Refer to

your local codes for disposal requirements.

• Do not open or destroy batteries. Effluent electrolyte can cause injury to the skin and eyes. It

may be toxic.

• In order to avoid fire hazards when replacing the fuse, only use the same type and the same

spec of fuse.

Transport

• Please transport the UPS only in the original packaging to protect against shock and impact.

Storage

• The UPS must be placed in the room where is ventilated and dry.

UNPACKING

Package List

The package should contain the following items.

Inspect the contents upon receipt. Do not turn on the unit and notify the carrier and the

dealer immediately if there is any damage or lacking of some parts.

Box of Power Module

See page 4 for details

Box of Battery Module

See page 5

UNPACKING

The box of Power Module should contain the following items:

PowerPanel® Business software is available on our website.

Please visit www.cyberpower.com and go to the Software Section for free download.

Power Module Rackmount Rails

USB Communication CableUser’s manual Flat Head Screws:

M4X8L (8)

Pan head screws:

M5X12L (12)

Battery Cable Terminal (9)Rackmount Ears

(Stands)

Parallel Cable

Plastic

Washers (8)

Screw Hole Dust

Covers (8)

Binding Head Screws:

M4X8L (6)

M5 Nut (8)

UNPACKING

The box of Battery Module should contain the following items:

Battery Module Rackmount Rails

Flat Head Screws:

M4X8L (8)

Pan Head Screws:

M5X12L (12) Binding Head Screws:

M4X8L (6)

M5 Nut (8)

Rackmount Ears

(Stands)

Plastic

Washers (8)

Screw Hole Dust

Covers (12)

Terminal (6)

HARDWARE INSTALLATION

These versatile UPS systems can be mounted in a rackmount or vertical tower orientation. This

versatility is especially important to growing organizations with changing needs that value

having the option to position a UPS on a floor or in a rackmount system. Please follow the

instructions below for the respective mounting methods.

RACKMOUNT INSTALLATION

Step 1: Rackmount ears installation

(1) Attach the two rackmount ears to the UPS using the provided screws M4X8L*8pcs.

(2) Insert dust cover into the rackmount ear screw holes that are not being used.

(1)

(2)

CAUTION! To prevent the risk of fire or electric shock, only use the supplied hardware

to attach the mounting brackets.

Step 2: Rackmount rails Installation

(1) The rails adjust to mount in 48-cm (19-inch) panel racks from 46.4 to 73.8cm (18.3 to 29

inches) deep. Select the proper holes in the rack for positioning the UPS in the rack. The

rails take up position 1 through position 3.

(2) Attach the rackmount rail to your rack with two M5X12L screws, two plastic washers, and

two M5 nut at the front of the rack. (Located in position 1 & position 2; It can also located

in position 1 & position 3 or position 2 & position 3 alternatively). Do not tighten the screws.

Adjust the rail size on the rail assembly of your rack. Secure the rail to the rear of the rack

with two M5X12L screws, two plastic washers, and two M5 nut. Tighten all screws at the

front and rear of the rail. Once completed, perform the same steps for assembling the

other rackmount rail.

Step 3: Install the UPS on the rack

(1) Place the Power Module on a flat stable surface with the front of the unit facing toward

you. Secure the Power Module to your rack with four M5X12L screws at the front of the

rack. (Located in position 2 & position 8).

HARDWARE INSTALLATION

position 9

position 8

position 7

position 6

position 5

position 4

position 3

position 2

position 1

position 3

position 1

(1) (2)

position 2

position 8

CAUTION! The Battery module must be installed below the Power module.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali CyberPower UPS

CyberPower

CyberPower ValuePro VP700ELCD Manuale utente

CyberPower

CyberPower EC450G Manuale utente

CyberPower

CyberPower PR2200ELCDSL Manuale utente

CyberPower

CyberPower Value 400E Manuale utente

CyberPower

CyberPower DX650E Manuale utente

CyberPower

CyberPower OL6000ERT3UDM Manuale utente

CyberPower

CyberPower HSTP3T60KE Manuale utente

CyberPower

CyberPower BRG1350AVRLCD Manuale utente

CyberPower

CyberPower Value1200ELCD Manuale utente

CyberPower

CyberPower Value1200ELCD Manuale utente

CyberPower

CyberPower BU650E Manuale utente

CyberPower

CyberPower LE825G Manuale utente

CyberPower

CyberPower BU600ELCD Manuale utente

CyberPower

CyberPower CPS600E-IN Manuale utente

CyberPower

CyberPower 649532815197 Manuale utente

CyberPower

CyberPower 400E-GP Manuale utente

CyberPower

CyberPower Sinewave Series Manuale utente

CyberPower

CyberPower CP900EPFCLCD Manuale utente

CyberPower

CyberPower OfficePower 1500AVR-H0 Manuale utente

CyberPower

CyberPower PR2000LCD Manuale utente

CyberPower

CyberPower 649532004256 Manuale utente

CyberPower

CyberPower 649532010066 Manuale utente

CyberPower

CyberPower CP825LCD Manuale utente

CyberPower

CyberPower OLS3S15KE Manuale utente

Manuali UPS popolari di altre marche

Pylontech

Pylontech Victron & Pylontech US5000 Manuale utente

Tecnoware

Tecnoware EVO DSP PLUS MM 6.8 Manuale utente

Mecer

Mecer ME-1000-WTU Manuale utente

Mustek

Mustek PowerMust 530(B) Plus Manuale di installazione e funzionamento

Emerson

Emerson Liebert NXL series Manuale utente

MAKELSAN

MAKELSAN BOXER SERIES Manuale utente

Block

Block PC-0524-400-0 Manuale utente

Eaton

Eaton 3S Istruzioni per il montaggio

Best Power

Best Power 610 Manuale utente

Best Power

Best Power Unity/I UT3K Manuale utente

Mustek

Mustek PowerMust 400 Offline Manuale utente

Xantrex

Xantrex Trace 512 UR-UPS Manuale utente

Forza

Forza SL-1501UL Manuale utente

LEGRAND

LEGRAND keor 310081 Manuale utente

ABB

ABB Conceptpower DPA 500 Manuale utente

ZincFive

ZincFive BC Series Manuale utente

BPC

BPC 1.5K SMART Manuale utente

IBM

IBM 5595-1AX Manuale utente