CYBEX 750AT Manuale utente
Cybex Arc Trainer®750AT
Total Access (TA) Addendum
Cardiovascular Systems
Part Number 750A-440-4 A
Cybex®and the Cybex logo are registered trademarks of Cybex International, Inc.
Polar®is a registered trademark of Polar Electro Inc.
iPOD®is a registered trademark of Apple Inc.
DISCLAIMER: Cybex International, Inc. makes no representations or warranties regarding the contents of this manual. We reserve
the right to revise this document at any time or to make changes to the product described within it without notice or obligation to notify
any person of such revisions or changes.
© 2009, Cybex International, Inc. All rights reserved. Printed in United States of America.
10 Trotter Drive Medway, MA 02053 • 888-462-9239 • 508-533-4300 • FAX 508-533-5183
About This Addendum
This addendum is for Total Access (TA) units only. It describes the differences between the standard
Arc Trainer and the TA Arc Trainers.
For Total Access units, refer to this addendum and the 750A/750AT Arc Trainer Owner’s Manual, part
number 5750-4.
Assembly and Setup
Page 2-1
Cybex Arc Trainer 750AT Total Access (TA) Addendum
2 – Assembly and Setup
Setup
NOTE: Setup mode is accessed using the keys on a standard membrane. The keys are different on the
TA membrane. See Figure 1. The standard keys are not visable but still active for setup mode. A
template is provided to locate the key locations of a standard membrane.
Resistance
Level
End
Cool Down
Programs
Quick Start
Incline
Weight Fan Off
Time
Level Fan Lo
Fan Hi
Enter
Time
Figure 1
750AT TA Membrane
750AT Standard Membrane
NOTE: Cut out the keypad template on the last page of this addendum. Use the template as a guide to
access setup settings.
Setup is a separate control screen that allow the user to define multiple aspects of the unit’s functions.
Set up can be opened from Dormant mode, Count Down and the CSAFE ID entry screens.
To open setup screen, press CLEAR, key sequence 7-5-0 and press ENTER.
Press ENTER to enter setup feature, allow changes and return to main menu. PAUSE/END can also be
used to reset and exit to Dormant mode.
Press the LEVEL CONTROL keys to scroll forward or backward in the setup menu.
Press CLEAR to reset back to default or previously stored value.
Assembly and Setup
Page 2-2
Cybex Arc Trainer 750AT Total Access (TA) Addendum
MENU SET UP Options
1 - Language GERMAN FRENCH
SPANISH ENGLISH
JAPANESE SWEDISH
RUSSIAN DANISH
2 - Units ENGLISH (LB/MPH)
METRIC (KG/KPH)
3 - Clock Style 12 HR US DATE 24 HR EURO DATE
12 HR EURO DATE 24 HR US DATE
4 - Current Time 12 HR US DATE ‘HH:MM X MM/DD/YYYY’
24 HR EURO DATE ‘HH:MM DD-MM-YYYY’
12 HR EURO DATE ‘HH:MM X DD-MM-YYYY’
24 HR US DATE ‘HH:MM MM/DD/YYYY’
(Use keypad to enter values or toggle the LEVEL
CONTROL key)
5 - Default Time Initial displayed
choice for programs
requiring a time
setting.
DEFLT TIME 10 DEFLT TIME 60
DEFLT TIME 20 DEFLT TIME 90
DEFLT TIME 30 (default)
NOTE: Choices are limited to range of MAX time.
6 - Review Time Summary of workout
session totals. Can
be seen as 1, 2 or 3
cycles
SHORT – 1 LONG – 1
SHORT – 2 LONG – 2
SHORT – 3 LONG – 3
7 - Max Time Limit user’s workout
time MAX TIME = OFF MAX TIME = 50
MAX TIME = 20 MAX TIME = 60 (default)
MAX TIME = 30 MAX TIME = 90
MAX TIME = 40 MAX TIME = 120
MAX TIME = ZONED* (see below)
8 - Sound TONE = ON (factory setting)
TONE = OFF
9 - Dormant Style Defines what is
displayed in Dormant
Mode
0 – DEFAULT (default) 3 – CLOCK
1 – TEXT MSG 4 – PROFILES
2 – OUT OF ORDER
10 - Dormant Text** Text is entered via
communications link.
DORMANT MSG 1
DORMANT MSG 2
DORMANT MSG BOTH
11 - Active Mode Text
on/off**
Text is entered via
communications link. WORKOUT MSG ON (or OFF)
*MAX TIME ZONED If choice is ZONED, choose the actual time for each zone to start and maximum time
setting.
HH:MM X is the actual time the zone starts, and YYY is the maximum time allowed during time zone.
Assembly and Setup
Page 2-3
Cybex Arc Trainer 750AT Total Access (TA) Addendum
Example:
Format Factory Default
ZONE1 HH:MM X YYY ZONE1 05:01A 60
ZONE2 HH:MM X YYY ZONE2 09:01A OFF
ZONE3 HH:MM X YYY ZONE3 04:01P 60
ZONE4 HH:MM X YYY ZONE4 09:00P OFF
**For more information on editing Display and Active Mode text, visit www.cybexintl.com/support/resources/750
Assembly and Setup
Page 2-4
Cybex Arc Trainer 750AT Total Access (TA) Addendum
This page intentionally left blank
Operation
Page 3–1
Cybex 750A/750AT Arc Trainer Owner’s Manual
3 - Operation
Intended Use
Intended use of this exercise equipment is to aid or improve general physical fitness and exercise.
Terms Used
Active Mode – Any time the unit is controlling resistance and accumulating workout data. Active Mode
begins after hitting QUICK START during the initial count-down screen, after completing the setup
for a program, or by default if the initial count-down screen times out and enters QuickStart Manual
mode.
Auto-Scan – Display automatically cycles through workout data.
Cool Down –A reduction of work load for a short duration allows user to gently reduce heart rate. Cool
Down occurs two minutes prior to completion of the program-controlled workout sessions.
Count Down – The lower left INCLINE display shows a 5-0 count down. At the conclusion of the count
down, unit goes into Active Mode.
Dormant Mode – Occurs when unit is plugged in with optional AC adaptor and not in use.
Manual Mode – The unit defaults to this mode if not in a program. Manual Mode allows the user to adjust
the Resistance (0-100) and Incline (0-20). Time will count up in Quick Start Manual mode or count
down to the chosen session time if desired by entering a TIME or selects the Manual program and
completes setup.
Program Setup Mode – Begins after pressing the Programs key. Upon entering a program, user is
prompted to adjust the appropriate settings.
Quick Start – By default, the unit will end up in Quick Start Manual Mode if the user begins striding and
allows the 5 second count-down to end. Also choose the QUICK START button to enter into Quick
Start Manual Mode, where the user controls the Resistance and Incline as time counts up.
Workout Review – Review of the accumulated workout data and/or the results of the Fitness Test will
happen at the end of each workout session.
Operation
Page 3–2
Cybex 750A/750AT Arc Trainer Owner’s Manual
Read and understand all warnings and cautions in Chapter 1 – Safety and all operation instructions in
this chapter before operating unit.
Mount and Dismount
WARNING: Wait until all moving parts come to a complete stop and foot plates are in lowest
position before mounting or dismounting.
To mount unit safely:
1. Verify unit is in Dormant Mode and foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates.
To dismount unit safely:
1. Wait until foot plates come to a complete stop.
2. Grasp handrails for support and carefully step off back of unit.
Emergency Dismount
If an emergency stop and dismount is required:
1. Grasp handrails for support.
2. Stop striding.
3. Wait until foot plates come to a complete stop.
4. Continue to hold handrails while carefully stepping off unit.
Operation
Page 3–3
Cybex 750A/750AT Arc Trainer Owner’s Manual
Console Keys
Control keys on the display are usable during operation and may be pressed at any time to make
adjustments in resistance, incline, data readouts or fan speed. See Figure 1.
P-9 Heartrate ControlP-8 CardioP-7 StrengthP-6 Interval 1:2P-5 Interval 1:1P-4 Pike’s PeakP-3 Hill IntervalP-2 HillsP-1 Weight Loss
Figure 1
Resistance
Level
End
Cool Down
Programs
Quick Start
Incline
Weight Fan Off
Time
Level Fan Lo
Fan Hi
Enter
Time
Heart Rate
Indicator
Bar Graph
Text Area
Data
Readouts
Time/Incline Resistance Key Pad
Per MinDistanceCal / Hr Strides Calories Watts BPMMETs
Operation
Page 3–4
Cybex 750A/750AT Arc Trainer Owner’s Manual
Console Keys Description
Programs Program Setup Mode Choose from twelve programs or up to nine custom
programs
Cool Down Cool Down Mode Initiates the two minute cool-down sequence
End Stop Exit Active Mode and Review Mode is entered.
Incline ΛV Set incline Toggle (ΛV) to increase or decrease incline
Quick Start Quick Start Manual
Mode Go directly to Quick Start Manual Mode
Load + - Adjust resistance Toggle (+ - ) to increase or decrease resistance
Keypad (Program Setup)
Time Workout time Adjust workout time
Level Workout level Adjust program level (1-10)
Weight User’s Weight Adjust users weight
Fan Hi High setting Set fan to high setting
Fan Lo Low setting Set fan to low setting
Fan Off Turn fan off Default
Enter Accept any setting Moves setup process forward
Altri manuali per 750AT
1
Indice
Altri manuali CYBEX Ellittica
Manuali Ellittica popolari di altre marche
Weslo
Weslo Momentum 4.0 Elliptical Manuale operativo e di manutenzione
Progear Fitness
Progear Fitness Air elliptical pro 1307 Manuale utente
Torque Fitness
Torque Fitness XPLLP Manuale utente
Octane Fitness
Octane Fitness PRO3700C Manuale utente
Xterra
Xterra FS5.8e Manuale utente
Bodyguard
Bodyguard E-40 Manuale utente
Bonn Germany
Bonn Germany Concept 2.2 Manuale utente
Precor
Precor Resolute RSL 620 Manuale utente
NordicTrack
NordicTrack E 9.2 Elliptical Manuale utente
Vision Fitness
Vision Fitness X6600iNetTV Manuale utente
Matrix
Matrix MX-A5x Manuale utente
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 Manuale utente
