CYP SY-XTREAM-PIP Manuale utente
SY-XTREAM-PIP
UHD+ Dual HDMI to USB Video Capture with PIP
OPERATION MANUAL
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2021 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply. Please keep the
following in mind as you unpack and install this equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in use
to avoid wasting electricity.
VERSION HISTORY
REV. DATE SUMMARY OF CHANGE
v1.00 08/02/2021 Preliminary release (RDV1)
CONTENTS
1. Introduction...........................................................1
2. Applications ...........................................................1
3. Package Contents ..................................................1
4. System Requirements ...........................................2
5. Features..................................................................2
6. Operation Controls and Functions .......................3
6.1 Front Panel........................................................................3
6.2 Rear Panel..........................................................................4
6.3 Conguration and Video Capture.............................5
6.3.1 USB Video Capture Control Software...........5
6.3.2 Video Capture .......................................................8
7. Connection Diagram .............................................9
8. Specications...................................................... 10
8.1 Technical Specications ............................................ 10
8.2 Video Specications.................................................... 11
8.3 Audio Specications................................................... 13
8.3.1 Digital Audio ...................................................... 13
8.3.2 Analogue Audio................................................ 13
8.4 Cable Specications ................................................... 14
9. Acronyms............................................................. 15
1
1. INTRODUCTION
This HDMI to USB Video Capture Recorder with PIP can support
resolutions up to 18Gbps 4K UHD+with HDR (via input 1 and the bypass
path) while simultaneously streaming a full screen or PiP/PoP audio/video
signal at 1080p to a USB connected PC for capture or re-broadcast. HDMI
sources up to 1080p60 are supported for capture without modication,
while 4K sources from input 1 will be automatically scaled down to 1080p.
The use of a special video timing stabilization feature helps to ensure
that the USB capture stream won’t lock up or drop, even if the HDMI
input source is intermittent or becomes disconnected. Digital stereo
audio from either HDMI (LPCM 2.0) or the 3.5mm analogue audio input
will be captured with the HDMI video source and is selectable within the
conguration software.
USB capture is accomplished using the UAC (USB Audio Class) and UVC
(USB Video Class) standards, allowing the unit to support most common
video capture, chat, or streaming software, including support for the Free
OBS (Open Broadcaster Software) streaming software which is available
for Windows PC, macOS and Linux. The unit is powered directly by the
USB 3.0 port so an external power supply is not required (A Y-cable is
required when connected via USB 2.0 in order to deliver the necessary
power). Availability and access to the controllable features of the unit
depend on the capture software used.
2. APPLICATIONS
Live video stream recording for broadcast
Security camera recording
Gameplay video archival
3. PACKAGE CONTENTS
1× UHD+HDMI to USB Video Capture Recorder with PIP
1× USB 3.0 Type-A to Type-B Cable
1× Shockproof Feet (Set of 4)
1× Operation Manual
2
4. SYSTEM REQUIREMENTS
HDMI source equipment such as a media player, video game console
or set-top box.
HDMI receiving equipment such as an HDTV, monitor or audio
amplier.
Personal computer (Windows or macOS) with a USB 3.0 port and
plenty of available hard drive space.
5. FEATURES
HDMI input 1 and HDMI output supports 4K@60Hz with HDR
Input 2 supports up to 1080p@60Hz
HDCP 2.2 and HDCP 1.x compliant
Note: Video capture of sources using HDCP encryption is not supported.
Automatically scales 4K sources to 1080p for USB capture
Additional analogue audio input via 3.5mm port
Supports capture of stereo audio from either HDMI input (LPCM 2.0) or
the 3.5mm analogue audio input (selectable via control software)
Integrated audio mixer provides a way to combine an analogue audio
source with HDMI audio
Mode Switch button allows easy switching between the Full, PoP, and
PiP video layouts
Complies with the UAC (USB Audio Class) and UVC (USB Video Class)
standards, allowing the unit to support most common capture and
video streaming software
Note: Access to many of the software controllable features of the unit,
beyond simple video capture, requires the use of the USB Video Capture
Control software which is only available for Windows 10 or later PCs
Supports video timing stabilization to help ensure a reliable and stable
USB capture stream
Capturing over USB 3.0 allows uncompressed video and audio data
capture (up to 1080p, LPCM 2.0)
Capturing over USB 2.0 requires the application of minimal MJPEG
compression to the video and audio data (up to 1080p, LPCM 2.0)
Unit may be powered directly via USB 3.0 (When using USB 2.0, a
Y-cable is required to provide additional power)
Supports the Free OBS (Open Broadcaster Software) streaming software
which is available for Windows 10 (or later), macOS, and Linux.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IN
POWER ACTIVE MODE IN
SWITCH
MODE
SY-XTREAM-PIP
1 2 3 4 5
1POWER LED: This LED will illuminate red to indicate the unit is on and
receiving power but does not yet have a live HDMI source. When a live
HDMI source is detected, the LED will illuminate green.
2ACTIVE LED: When software on the connected PC is actively receiving
video from the unit via USB, this LED will illuminate green.
3MODE LED: This LED indicates the current PiP/PoP state of the unit’s
USB output. When PiP is enabled, the LED will illuminate red. When
PoP is enabled, the LED will illuminate green. When the output is full
screen the LED will remain o.
4SWITCH IN Button: Press this button to toggle the primary HDMI
source for the USB output between the two HDMI inputs.
Note: This does not aect the video source for the HDMI output which is
always a bypass output for input 1.
5SWITCH MODE Button: Press this button to sequentially switch
between the available USB video output formats (Full screen, PoP, PiP).
Note: This does not aect the format of the video displayed by the HDMI
output which is always a bypass output for input 1.
4
6.2 Rear Panel
USB 3.0
HDMI OUT
12
AUDIO IN
HDMI IN
1 2 3 4
1USB 3.0 Port: Connect directly to a PC’s USB 3.0 port for control, video
capture and power.
Note: Video capture of sources using HDCP encryption is not supported.
If connected via USB 2.0, use of a Y-cable connected to 2 USB 2.0 ports is
required in order to properly power the unit.
2HDMI OUT Port: Connect to an HDMI TV, monitor or amplier for
digital video and audio output.
Note: This port is always a direct bypass output from input 1.
3HDMI IN 1~2 Ports: Connect to HDMI source equipment such as a
media player, game console or set-top box.
Note: Input 2 only supports video sources up to 1080p60Hz.
4AUDIO IN Port: Connect to the stereo analogue output of a device
such as an audio player or PC.
5
6.3 Conguration and Video Capture
6.3.1 USB Video Capture Control Software
The USB Video Capture Control software provides control over a selection
of basic functions of the unit, including: primary HDMI source, audio
source and control, picture mode (Full/PoP/PiP), PiP conguration, and
video proc-amp settings. An option to return the unit to its factory
defaults is also provided.
Note: Please obtain the “USB Video Capture Control” software from your
authorised dealer and save it in a directory where you can easily nd it. This
software requires the .NET framework and only supports Windows 10 or later.
To use the software, connect the unit to your PC via the provided USB 3.0
cable and then execute the control application. A conguration window,
similar to the screenshot below, will appear. All changes made to the
video capture signal via this app will take eect immediately.
1) Audio Source: Switch the audio source type to record between
embedded HDMI audio, analogue line input, or the audio mixer.
Note: Only 2 channel LPCM audio can be captured. Bitstream audio is not
supported and will be automatically muted.
HDMI: Select this to capture audio from the currently selected
HDMI audio source. Available options are: HDMI input 1, HDMI
input 2, or “Follow Main Source”which will use the audio from
whichever HDMI source is currently set as primary.
Indice
Altri manuali CYP Registratore digitale
