CYP CED-2M Manuale utente
CED-2M
4K UHD+ EDID Manager
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2016 by Cypress Technology.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
RDV1 08/11/16 Draft
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
6.1 Front Panel ........................................3
6.2 Rear Panel.........................................4
6.3 OSD Menu.........................................5
7. Connection Diagram .......................... 12
8. Specications ...................................... 13
8.1 Technical Specication.................13
8.2 Video Specication Support.........14
1
1. INTRODUCTION
This 4K UHD HDMI EDID Emulator is designed to manage and
manipulate the EDID information provided to a connected HDMI
source device. EDID contains critical information about the
capabilities of the connected display, including audio and video
format support, HDMI feature support, etc. and this unit aims to simplify
the technical complications that often arise when performing video
system integration, home theater installation, display room setup, or
audio/video equipment testing. This unit provides the ability to not
only select between the display’s native EDID and pre-made EDIDs,
but it also allows the user to copy EDIDs from other displays and use
them, or to create their own customized EDID using the PC-based
EDID management software.
2. APPLICATIONS
• HDMI/DVI EDID management
• AV system integration and home theater installation
• AV equipment testing
3. PACKAGE CONTENTS
• 1 x 4K UHD HDMI EDID Emulator
• 1 x 5V DC Power adaptor
• Operational Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as media players, video game
consoles or set-top boxes.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.
2
5. FEATURES
• HDMI input and output with 18Gbps (600MHz) 4K UHD support
• DVI 1.0 compliant with the use of an HDMI-DVI adaptor
• HDCP 1.4 and 2.2 compliant
• Supports HD resolutions up to 3840x2160@60 Hz (4:4:4, 8-bit) &
4096x2160@60 Hz (4:4:4, 8-bit)
• Supports 48-bit Deep Color up to 1080p60
• Supports pass-through of LPCM 7.1, bitstream and HD bitstream
audio formats
• 8 built-in standard EDIDs, 8 slots for user-created or learned EDIDs,
and EDID bypass support
• Supports CEC pass-through
• PC-based EDID management tool support
• Supports four distinct EDID functions:
Read: Read and copy the connected display’s EDID into the
unit
Write: Overwrite connected display’s EDID (only available on
displays which explicitly support the overwrite function)
Emulation: The HDMI input device reads the EDID stored
within the unit (built-in, learned, or created)
Bypass: The HDMI input device reads the EDID directly from
the connected display
Note: 4K UHD sources with HDR or equivalently high-bandwidth signals
require an appropriate compatible display and HDMI cables in
order to achieve the best image quality. The use of “Premium
High Speed HDMI” cables is highly recommended.
3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
5
2
6
3
7
4
8
MENU –+ENTER
EDID MODE INFO
User
Internal
HDCP Ver.
HDCP Mode
3
1 6 7 8 92
5
4
1LEDs 1~8: These LEDs illuminate to indicate which EDID from the
currently selected EDID mode is active.
2Internal: This LED will illuminate when the unit is in Internal EDID
mode.
3User: This LED will illuminate when the unit is in User EDID mode.
Note: When both the User and Internal LEDs are lit, the unit’s EDID is
in External bypass mode.
4HDCP Mode: This LED illuminates to indicate the current HDCP
management mode selected for the HDMI input port. A red
LED indicates “Follow In” mode, and the unit will enforce HDCP
based on the requirements of the connected source. A green
LED indicates “Follow Out” mode, and the unit will enforce HDCP
based on the capability of the connected display. An un-lit LED
indicates that HDCP support has been completely disabled.
5HDCP Ver.: This LED illuminates to indicate the HDCP version used
by the connected source. A red LED indicates that the source is
using HDCP v1.x (1.0~1.4). A green LED indicates that the source is
using HDCP v2.2. When LED concealed it indicates no HDCP from
input source.
6MENU: Press to enter the OSD menu, or to back out from menu
items.
Note: Press and hold the menu button for 3 seconds to reset the
unit to factory defaults.
7-/EDID: Press to move down or adjust selections within OSD menus.
While not in a menu, press this button to sequentially switch
4
through the available EDIDs from 1 to 8.
8+/MODE: Press to move up or adjust selections within OSD menus.
While not in a menu, press this button to sequentially switch
through the available EDID modes (User, Internal and External
bypass).
9ENTER/INFO: Press to conrm a selection within the OSD or to go
deeper into a menu item. While not in a menu, press this button to
display basic information about the currently connected source
on the OSD. When output HDMI is not connected, press this button
to select HDCP Mode. When output HDMI is not connected, press
this button to select HDCP Mode.
6.2 Rear Panel
HDMI IN USB POWER DC 5VHDMI OUT
1 2 3 4
1HDMI OUT: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output. If there is no valid HDMI source the output
will display a blue screen.
2HDMI IN: Connect to HDMI source equipment such as a media
player, game console or set-top box. DVI sources are supported
with the use of an HDMI to DVI adapter.
3USB: This slot is used for PC software control, EDID upload and
rmware updates. (see section 6.5)
4DC 5V: Plug the 5V DC power adapter into the unit and connect
it to an AC wall outlet for power. The LED will illuminate to indicate
the unit is on and receiving power.
5
6.3 OSD Menu
First Layer Second Layer Third Layer
EDID Emulator
EDID Mode
Internal
User
External
EDID Select
1: 1080P@60/8/RGB/LPCM
2: 4K2K_30/8/RGB/LPCM
3: 4K2K_30/8/YUV/Bitstream
4: 4K2K_30/12/RGB/HDR/LPCM
5: 4K2K_30/12/YUV/HDR/Bitstream
6: 4K2K_60_Y420/8/LPCM
7: 4K2K_60_Y420/8/Bitstream
8: 4K2K_60/8/RGB/LPCM
Copy TV EDID
1: DVI/1080P
2: 1080P@60/8/3D/YUV/Bitstream
3: 1080P@60/8/YUV/Bitstream
4: 4K2K@60/8/RGB/Bitstream
5: Star
6: Lucky
7: Sunny
8: Sonic
Program EDID To
TV Select : Internal 1~8, User 1~8
[EDID INFO]
OUTPUT UHD To 1080P :
BYPASS, FIXED
HDCP
HDCP : Apple
Mode, Follow In,
Follow Out
Indice
Altri manuali CYP Unità di distribuzione dell'energia
