Cypher PUMA Manuale utente

PUMA
Portable Universal Media Archive
User Manual V 2.8
Including PUMABDand Dual Drive
March 2020
Cypher Technology Ltd
Leatherhead, UK
cyphertechnology.com

Table of Contents
1 Description............................................................................................................................4
2 Quick Start Guide..................................................................................................................6
2.1 Turning On......................................................................................................................6
2.2 Making Master and Working Copies of a F ash Card......................................................6
2.3 Turning Off......................................................................................................................6
3 Detai ed Operation................................................................................................................7
3.1 Setting up and Powering PUMA.....................................................................................7
3.2 Making Evidentia backup of F ash Card or USB stick....................................................7
3.3 Turning Off......................................................................................................................8
3.4 Checking for Externa Drive and PUMA Status Information............................................8
3.5 Menu System..................................................................................................................8
3.5.1 To Se ect a Menu Item...............................................................................................8
3.5.2 Main Menu List..........................................................................................................8
3.5.3 Disk to Disk Sub-menu List (Dua Drive On y)............................................................9
3.5.4 Settings Sub-menu List..............................................................................................9
3.5.5 Uti ities Sub-menu List...............................................................................................9
3.6 Main Menu Items............................................................................................................9
3.6.1 Make Working Copy (make simp e fi e copy).............................................................9
3.6.2 Make Encrypted Copy...............................................................................................9
3.6.3 Make Master Copy...................................................................................................10
3.6.4 Hard Disk Master.....................................................................................................10
3.6.5 Disk to Disk..............................................................................................................10
3.6.6 Wipe F ash Card......................................................................................................10
3.6.7 Format F ash card....................................................................................................11
3.6.8 Adjust the Interna Time and Date............................................................................11
3.7 Disk to Disk Sub-menu.................................................................................................11
3.7.1 Disk Copy................................................................................................................11
3.7.2 Encrypted Disk Copy...............................................................................................11
3.7.3 Working from Master...............................................................................................11
3.8 Settings Sub-menu.......................................................................................................12
3.8.1 Navigation and Settings...........................................................................................12
3.8.2 Set Master Disk Type..............................................................................................12
3.8.3 Set Working Disk Type............................................................................................12
3.8.4 Enab e JPEG creation on Working Copies...............................................................12
Cypher Technology Ltd V2.8(14) March 2020 2

3.8.5 Adjust the Internal Time and Date............................................................................12
3.9 Utilities Sub-menu.........................................................................................................12
3.9.1 Make ideo D D.....................................................................................................12
3.9.2 erify Master Copy against Flash Card...................................................................12
3.9.3 erify Multi-Disk Master Set.....................................................................................13
3.9.4 Restore the Master Copy to a Flash Card................................................................13
3.9.5 Restore Multi-Disk Master Set.................................................................................13
3.9.6 Calculate the Checksum of the Flash Card..............................................................13
3.9.7 Calculate the Checksum of the Master Disk Image..................................................13
3.9.8 Software Installation Procedure...............................................................................13
4 Technical Background.........................................................................................................15
4.1 PUMA Master Copy (bit for bit copy).............................................................................15
4.1.1 Full Image Master....................................................................................................15
4.1.2 Compact Master......................................................................................................15
4.1.3 Quick Master...........................................................................................................15
4.1.4 The Compact Master process..................................................................................16
4.1.5 Why archive the file system?...................................................................................16
4.1.6 Partition Table..........................................................................................................16
4.1.7 File allocation information........................................................................................17
4.1.8 File un-deletion........................................................................................................17
4.1.9 Historical file data....................................................................................................17
4.1.10 Media history and fragmentation............................................................................17
4.2 PUMA ancillary functions..............................................................................................17
4.2.1 Disk erify Read......................................................................................................17
4.2.2 Working Copy (file copy)..........................................................................................18
4.2.3 Card and Disk Checksum........................................................................................18
4.2.4 Flash Card Wipe (Erasing).......................................................................................18
4.2.5 AES 256 Encryption.................................................................................................18
4.3 System Architecture......................................................................................................19
4.4 Transfer Times..............................................................................................................19
4.5 RAW File handling........................................................................................................19
5 Technical Support...............................................................................................................20
5.1 System re-starting in the event of failure.......................................................................20
5.2 Contact.........................................................................................................................20
5.3 Software Updates.........................................................................................................20
6 Specifications......................................................................................................................21
7 Disclaimer...........................................................................................................................21
Cypher Technology Ltd V2.8(14) March 2020 3

1 Description
PUMA is a rugged and evidentially secure system for archiving USB and flash card data
to CDROM, DVD or BD(1) media Its automated backup procedure make it simple to
use It is aimed primarily at backing up flash based audio and video recorders and
digital cameras and includes a RAW to JPEG image converter PUMA will back up any
type of file data and can be used to archive USB pen drives and other USB disk drives
The main features are as follows:
•Simple operation Single, dedicated “Transfer” button initiates entire archive
sequence
•Rugged construction and no hard drive increases reliability and evidential
security
•Unique bit for bit copy of flash card provides ultimate evidential audit trail and
reduces possibility of legal challenges without increasing back-up size
•Three automated steps in transfer procedure: Transfer, data verify, and flash
media overwrite/erase/format
•Flash card, forensic wipe process ensures that deleted data cannot be recovered
and removes any viruses
•Fast transfer rates reduces back-up time Up to four times faster than laptop for
transferring files 20Mbyte /sec transfer rate
•Self contained unit with premium quality, full height DVD/CDROM R/W drive
•Re-mounts and verifies disk after writing to ensure maximum reliability of backup
•Supports wide range of BD-R(1), BD-R DL, DVD +/- R, +R/-R DL and CD -R
media
•Proprietary software tailored precisely to the needs of law enforcement and
evidence gathering Closed nature of operating system increases evidential
security
•JPEG versions of RAW files generated on Working Copy A list of supported
RAW camera formats is given in APPENDIX 1
•Can be powered from mains, vehicle power(2) or external batteries(2)
•Supports all common flash media (see Specification), USB hard drive
New in Version 2.8
•Dual Drive Option (external DVD or Blu-ray Writer) with disk to disk functions
such as disk copying and AES 256 encryption (Option) and Working Copy from
Master Disk production
(1) Blu-ray support is an option.
(2) Requires optional adapter
Cypher Technology Ltd V2.8(14) March 2020 4

Fig 1. Front Panel
Fig 2. Rear Panel
Cypher Technology Ltd V2.8(14) March 2020 5

2 Quick Start Guide
2.1 Turning On
1. Connect the supplied 12V 5A power supply (PSU) lead.
2. Remo e any flash card and switch on (rear panel switch up).
3. A line of dots will appear on the display and PUMA will start in about 25 seconds.
2.2 Making Master and Working Copies of a Flash Card
1. Check that the displayed time and date are correct.
2. Insert the flash card into the appropriate front panel slot. The display will show the
card’s size and number of files. A USB stick may be plugged into one of the USB
sockets on the rear panel or front panel.
3. Press the eject button on the DVD/Blu-ray dri e to eject the disk tray. Place a BD(1),
DVD or CD in the tray. For the Dual Dri e ersion, press the eject button on the
external dri e and place a blank disk of the same size on the tray and close the
drawer.
4. Press the TRANSFER button to start the transfer.
a) A Master copy is produced first. This consists of the transfer of the data from the
card to the disk and a erification read pass. On successful completion the
Master disk will be ejected and the checksum of the flash card and disk will be
shown. This can be noted down for future reference. Where multiple disks are
needed, follow the on-screen instructions and note down the separate disk
checksums as well as the final checksum for the card and whole backup.
Single Dri e:
b) Remo e the Master Copy disk and place a new disk on the tray. Press the lower
soft key marked “Continue” to proceed. The Working copy is now produced. On
successful completion the disk(s) will be automatically ejected.
Dual Dri e:
b) The Working copy will be ejected at the same time as the Master. Remo e the
Master and Working Copy disks.
c) The flash card may now be wiped and re-formatted. Press “N” when prompted if
this is NOT required.
The Transfer is now complete.
Note: If further copies are required, do not wipe the card and use the appropriate
functions a ailable in the “Menu”. Press “Menu” soft key and the Up/Down cursor keys.
2.3 Turning Off
Press the I/O button below the green LED to shutdown. When “Switch Off” is displayed,
turn off the rear panel Power Switch.
Cypher Technology Ltd V2.8(14) March 2020 6

3 Detailed Operation
3.1 Setting up and Powering PUMA
Using in a vehicle. PUMA requires a regulated 12V power supply. If PUMA is to be
used in a vehicle please use the 12V stabiliser available from your supplier or
Cypher Technology Ltd NOT the vehicle power direct.
1. Remove any flash card.
2. Switch on the Power Switch on the rear panel (switch up).
3. After about 25 seconds the PUMA program will start and the system is ready for use.
4. PUMA has various settings that control the format of the Master and working disks.
These are saved after any changes are made and will normally not require and
further attention. Normally a “Compact Master” is used and a “File Copy” working
disks. These settings can be inspected and changed in the Settings sub-menu.
5. Check that the displayed time and date are correct. If not use the “Adjust Time”
menu function to adjust the time and date (Section 3.8.5).
3.2 Making Evidential backup of Flash ard or USB stick
PUMA has an automated process for making an evidential archive of a flash storage
device. This process is initiated by pressing the [Transfer] key. The Transfer consists of
the sequence: Make Master Verify Master Make Working Copy and then Wipe and
format the flash card.
1. Place the flash card in the appropriate slot. If a USB drive is to be archived plug this
into either of the USB slots in the rear panel or the slot in the front panel (M1.3 only).
An extension lead may be required for bulky USB flash drives
2. Place a blank CD-R or DVD +/- R or BD-R(1) in the drive. The Master is generated
first. The size of the flash card is shown on the display when it is inserted. A CD will
hold 730MB a standard DVD 4 700 MB and a Blu-ray 25GB - 100GB. Where the
data size is larger than the disk size multiple disks will be produced. These disks will
be automatically numbered as Master Disk #1 Master Disk #2 etc. The Master Copy
has a log file which contains the time and date stamp of the backup as shown on the
display on the front of the machine as well as other meta data. For a Dual Drive
PUMA place a blank disk of the same size as the Master in the external writer and
close the tray.
3. Press the Transfer button. The automated transfer and verify process begins.
During the transfer the whole of the card is scanned not just the file data. The
display shows the % done and an estimate of time to go. (The “Cancel” soft key
allows the transfer to be aborted)
4. When complete PUMA ejects the verified Master Disk and displays the 8 digit
Checksum. This Checksum should be noted down.
(Multiple disk transfer - If the data size is bigger than the disk size, further disks will be
requested. Each disk has its own checksum, which is displayed at the end of each disk
transfer. hen all the data has been transferred, no new disks will be requested. Press
Cypher Technology Ltd V2.8(14) March 2020 7

{Continue} and the checksum of the whole Master Image will be shown. This should also
be noted down. This final checksum is the same as the checksum produced for the card.)
If the process was not successful, the disk(s) will not be ejected and an error
message will be displayed and the user will be prompted to re-burn that disk.
5. P MA then prompts for another blank disk to be inserted for the Working Copy. If
the size of the files on the flash card is bigger than the disk size, further disks will be
requested.
6. Where an external drive is connected and the Dual Drive option is enabled, the
Working copy will be made on the external writer, when a blank disk is inserted at
the same time as the blank Master disk.
7. If the whole Transfer process completed successfully the user will be prompted to
wipe the Flash card:
Press {Y} to wipe flash card or {N} to proceed without wiping card. After the card is
wiped it is automatically partitioned and re-formatted with a FAT32 file system.
The Transfer process is now complete. A new flash card may be inserted.
3.3 Turning Off
It is good practice to remove any flash cards or SB sticks from P MA before powering
down.
Press the I/O button below the green LED to shutdown. Press {Y} to confirm. When
“Switch Off” is displayed, turn off the rear panel Power Switch.
If {N} is pressed the Software Revision and Serial Number (where appropriate) will be
displayed and P MA will resume operation.
3.4 Checking for External Drive and PUMA Statu Information
Press the I/O button below the green LED to shutdown. If {N} is then pressed the
Screen will show if an external drive is connected and also then show the Software
Revision and Serial Number (where appropriate) and P MA will resume operation.
3.5 Menu Sy tem
3.5.1 To Select a Menu Item
Press the {Menu} soft key to enter the Menu system. The p/down arrow keys are used
to select the desired function. Press the [Go] soft key to execute the function.
Pressing the {Exit} soft key returns to the top level.
The Menu is arranged as follows:
3.5.2 Main Menu List
Menu Item Description
1 Working File Copy Creates Working Copy disk from inserted card or drive
2 Encrypted Copy Creates password protected copy to DVD/CD
Cypher Technology Ltd V2.8(14) March 2020 8

3 Make Master Copy Creates Master of Flash card or USB drive to DVD/CD
4 Hard Disk Master Makes a File Master of a Flash card or USB drive to
another USB hard drive
5 Disk to Disk Sub menu for disk to disk copying
6 Wipe Card verwrites flash card with “0”s and formats card
7 Format Card Formats card as FAT32
8 Adjust Time Adjusts PUMA internal time and date
9 Setti gs Enters Settings sub menu
10 Utilities Enters Utilities menu
3.5.3 Disk to Disk Sub-menu List (Dual Drive Only)
Disk Copy External drive disk copied to internal drive disk
E crypted Disk Copy External disk copied to encrypted copy on internal drive
Worki g from Master Makes Working Copy on internal drive from Master disk
3.5.4 Settings Sub-menu List
Set Master Type Sets the format of the main Evidential Master
Set Worki g Type Sets the format of the Working Copy
E able JPEGs Allows Jpeg creation on the Working Copy
Adjust Time Adjusts PUMA internal time and date
3.5.5 Utilities Sub-menu List
Make Video DVD Makes DVD or Blu-ray disk of video files
Verify Master Verifies flash card against Master Copy
Restore Master Creates clone flash card from Master Copy disk
Checksum Card Calculates checksum of card
Checksum Master Calculates checksum of data on Master Copy
I stall Software Install new software from DVD/CD
3.6 Main Menu Items
3.6.1 ake Working Copy (make simple file copy)
This is function will create a Working Copy from the flash card or USB stick. Normally all
files are copied, including hidden and system files. ther Working Copy formats can be
selected in the Settings sub-menu.
3.6.2 ake Encrypted Copy
This is an optional feature. It is used to make an AES 256 encrypted and password
protected copy of the files on the flash card. PUMA will automatically generate a
Cypher Technology Ltd V2.8(14) March 2020 9

pseudo-random high security 14 character password. It is highly recommended that
this be used for security reasons. Alternatively a password may be entered using the
cursor keys. The [ ],[>] keys select the character position and the [up],[down] keys
select the character value. Press the {Use} softkey when the correct password is shown
AND it has been noted down.
To Decrypt Files on the Encrypted Disk
A Decrypter program is copied automatically to the encrypted disk. To access the
encrypted files, insert the disk into a Windows XP or later PC. The encrypted files can
be seen in the “Files” folder. These files can be copied in the normal way but cannot be
accessed until decrypted.
To decrypt, double click on the Decrypter icon in the top-level of the CD or DVD. Select
the file or files to be decrypted using the Decrypter browser. When the selection is
complete, click the Decrypt button. You will be prompted for the password and then to
select a destination folder into which to copy the decrypted files. If the password is
correct the files will be decrypted.
3.6.3 Make Master Copy
This function will create a Master Disk fro the flash card or USB stick. The PUMA
Master contains all the data from the flash card on a write-once optical disk.
3.6.4 Hard Disk Master
This function creates a File Master copy of a large hard disk (or flash card or USB drive)
on a second, empty hard drive.
All files are copied along with a log file that contains the MD5 hash codes of all the files
so that the transferred material can be verified for added protection. It does not scan
unused areas of the drive and therefore should normally only be used where a full bit for
bit Master is not required. The HD Master can also be used where it is impractical to
create a standard PUMA Master and where, therefore, this could be regarded as “best
practice”
First connect the empty backup drive to one of the USB ports on PUMA (in the top level
of the Menu). The display should show the size of the disk and 0 files. If it shows any
files or says “No file system” then the drive should be formatted using the Menu “Format
card” option. After the format, exit the Menu and check that the display is now showing
0 files.
Then press {Menu} and scroll down to “Make HD Master”. Connect the source evidential
drive and press and {Go}. The destination drive is automatically chosen as the empty
drive.
Several backups can be made to the same drive and the destination drive will be
automatically recognised after its first use.
3.6.5 Disk to Disk
Opens sub menu for all disk to disk copy functions (dual drive PUMAs only)
3.6.6 Wipe Flash Card
This function will perform a forensic wipe of the flash card. No data will be recoverable
from the card after this operation (see below).
Cypher Technology Ltd V2.8(14) March 2020 10
Altri manuali per PUMA
2
Indice
Altri manuali Cypher Lettore multimediale


















