Cypress CPHD-3 Manuale utente
CPHD-3
HDMI V1.3 Pattern
Generator
Operation Manual
CPHD-3
Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer file, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2009 by Cypress Technology.
All Rights Reserved.
Version 1.0 July 2009
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
Never spill liquid of any kind on or into this product.
Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
Do not attach the power supply cabling to building surfaces.
Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide
ventilation.
Revision History
Version No Date Summary of Change
V1 20090803 Preliminary Release
Table of Contents
1
1
1
2
4
4
5
5
7
8
10
10
12
13
14
15
16
21
1. Introduction…………………………………………………........……….
2. Applications………………………………………………........……...….
3. Features………………………………………………........……...…........
4. Specications……………………………………….........……...…........
5. System Requirement………………………….........……...…...............
6. Package Contents………………………….........……...…..................
7. Control Panels………………………….........……...….........................
7.1 Front Pannel………………….........……...….............................
7.2 Rear Pannel………………….........……...…..............................
8. Remote Control………………….............……...…..............................
9. Built-IN RX EDID Structure………............……...…..............................
10. RS-232 Connection and Protocol......……...….................................
11. Features of RS-232 PC Software......……...…....................................
12. RS-232 PC Software Operation......……...…......................................
13. Timing Table………………….........……...….......................................
14. Pattern Table………………….................……...…..............................
15. Description of Patterns……...................……...…..............................
16. Firmware Revision History...................……...….................................
1. Introduction
This HDMI v1.3 compliant video test patter generator is the most advance
device for your audio & video signals test. With built-in 39 timings and 51
patterns that accept both analog and digital signals provide over thousand
types of testing signals. This handy device can be conveniently controlled via
the front panel buttons or the IR remote and a LCD screen for easy viewing.
Other then testing your devices this generator can also check the resolution
of your devices and record them, check bandwidth and phase behavior
transmission, verity video ampliers/color temperature/video motion plus HDCP
verication, data comparison, EDID check and many more useful functions.
2. Applications
Apparatus testing
Equipment adjustment
EDID check
Source setting dene
HDCP verication
3. Features
HDMI v1.3, HDCP v1.1 and DVI v1.0 compliant
Provides 39 timings and 51 patterns
Timing included SD, HD up to 1080p, PC up to UXGA/WUXGA (Reduce
Blanking Pixel Rate at 154MHz)
Patterns include Graphic Test Patterns and Data Analysis Patterns
Output format with digital HDMI/DVI, or analog PC/HD (component)
Color Space supports RGB444, YCbCr444 and YCbCr422
Deep Color supports 8 / 10 / 12 bits
Audio source is selectable among external 7.1CH, optical or internal
sinewave
Internal sinewave LPCM channel is selectable from 2CH, 5.1CH and 7.1CH
Supports HDCP test
Support EDID data analysis.
Support HDMI/DVI input data analysis.
Support Autorun function
Choose [My Favorite] timings and patterns through RS-232 using PC
software that included in the box.
Friendly user interface - LCD display, LED indicators, IR remote and RS-232
remote
1
4. Specications
39 Timings: 480 x 640 ~ 1366 x 768 (Details in TIMING TABLE)
SD timings: 480i , 480p, 576i and 576p
HD timings: 720p up to 1080p
PC timings: VGA up to UXGA, WUXGA (Reduce Blanking Pixel Rate at 154MHz)
NOTE > Analog PC output only supports PC timings
Analog HD output only supports SD/HD timings
HDMI/DVI output support all timings
NOTE > This system didn't support user timing editing
● 51 Patterns: (Details in PATTERNS TABLE)
Graphic Test Patterns: 45 Patterns
Data Analysis Patterns: 6 Patterns
NOTE > This system didn't support user pattern editing
● HDMI/DVI Input & Output:
Signal: TMDS single link and clock bandwidth up to 225MHz
Connector: HDMI TYPE-A. DVI input needs DVI to HDMI adaptor
● Analog PC/HD Output:
Signal: Analog R/G/B/H/V or analog YPbPr are support color space conversion.
Component HD outputs support tri-level sync and color space conversion.
Connector: D-SUB15. For HD component output, DB15 to 3-RCA adaptor
cable is required.
● Video Color Space and Deep Color:
HDMI Output: RGB444(8/10/12bits), YCbCr444(8/10/12bits) and
YCbCr422(8bits)
DVI Output:RGB444(8bits)
PC Output: RGB with separate sync H/V or
YPbPr with separate sync H/V and without composite sync on Y.
HD Output: YPbPr with composite sync on Y or RGB with composite sync on G.
2
● Audio Inputs:
External Analog 7.1CH: RCA jacks.
External Optical: Toslink jack.
Internal Sinewave:
Supports LPCM 2CH, 5.1CH and 7.1CH.
Supports Sampling Rate 48KHz, 96KHz and 192KHz (Refer to Audio
Output)
Sinewave Frequency: FL (Front Left)=1000Hz, FR (Front Right)=600Hz, CNT
(Center)=800Hz, SUB (Subwoofer)=400Hz, SL (Surround Left)=1200Hz, SR¹
(Surround Right)=1400Hz, SBL (Surround Back Left)=1600Hz, SBR (Surround
Back Right)=1800Hz
NOTE> This system didn't support bitstream (Dolby, DTS) decoding from
external optical.
● Audio Output:
Analog 7.1CH: RCA jacks.
Optical: Toslink jack.
Coaxial: RCA jack.
HDMI: Support I2S bus control.
Pattern 38: Audio control functions please refer to below table.
(SR1=Samping Rate)
2CH: FL (Front Left) and FR (Front Right). 6CH: FL (Front Left), FR (Front
Right), CNT (Center), SUB (Subwoofer), SL (Surround Left) and SR²
(Surround Right)
OUTPUT
INPUT Analog 7.1CH OPTICAL/COAX HDMI
Ext. 7.1CH Bypass LPCM 2CH
SR1:48KHz
LPCM 2CH, 6CH
SR1:48KHz
Ext. OPTICAL 2CH Bypass Bypass
Int. Sinewave 2CH, 6CH, 8CH LPCM 2CH
SR1:48KHz
LPCM 2CH, 6CH, 8CH
SR1:48K, 96K, 192KHz
Only support 2CH for SR196KHz
under 480i/p, 5767i/p,VGA60.
Only support 2CH for SR1192KHz
3
● Pattern 32 - EDID Analysis:
The EDID sources can form three different ways and support 2 block
analysis. The system will copy the Sink EDID and built-in into Rx EDID to
analysis display information.
Below are the three different ways to get the EDID:
1. Built-in Rx EDID
2. From Display HDMI/DVI Sink EDID
3. From Display VGA EDID
The EDID analyses are follow VESA E-EDID v1.3 and EIA/CEA 861D Version 3
standard.
● Pattern P39 - HDCP Analysis:
This system will do the HDCP handshaking and link-integrity test and it also
support Sink Repeater BKSV list and V’values.
● HDMI/DVI Input Analysis:
Support manual Hot-plug (Press [OPTION])
Pattern 48: HDMI/DVI Video Timing Detection and Analysis
Pattern 49: HDMI/DVI Video Packets and Infoframe Detection and Analysis.
Pattern 50: HDMI Audio Packets and Infoframe Detection and Analysis.
● User Interface:
LCD display, LED indicators, IR remote,
RS-232 remote: D-SUB9 female connector.
PC software supports RS-232 remote control.
5. System Requirement
Video and or audio source input with connecting cables and output display
and or speaker(s) with connecting cables.
6. Package Contents
HDMI V1.3 Pattern Generator
Power Adaptor
Remote Control
Operational Manual
4
7. Control Panels
7.1 Front Panel
①
T01 640x480-60
p01 WHITE
Timing Resolution
Pattern Descrption
Pattern Number
Timing Number Vertical
Frequency
② IR Remote Control Sensor.
③ Timing Selection: Switch between timings from T01 to T39.
④ Pattern Selection: Switch between patterns from P01 to P51.
For some patterns, it supports OPTION function. After enter option function
and then press Pattern up/down button to adjust the Brightness level.
⑤ AUTO: Turn ON/OFF Autorun Demonstration Function.
Using PC software through RS-232, users can selecte timings among
T01~T39 and patterns among P01~P51 for Autorun demonstration.
When Autorun is turn on, the systems will automatically running the
selection timings/patterns sequentially.
⑥ Output Format Selection: Press the button to switch between PC, HD, DVI
and HDMI output.
⑦ FAV.: Turn ON/OFF Favorite Function.
When switch on the Favorite function, users can select only the favorite
timings and favorite patterns. Users need to select favorite timings among
T01~T39 and favorite patterns among P01~P51 by using PC software
through RS-232.
When switch off the Favorite function, users can select all the timings and
patterns.
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑫ ⑬
⑪
⑭ ⑮ ⑯
5
⑧ HDCP ON/OFF: Turn ON/OFF the HDCP encryption. When the LED illuminate
it means the HDCP encryption is on.
⑨ Audio Source Selection: Press the button to switch between External
7.1CH(analog), external optical(digital) or internal sinewave audio source.
⑩ LPCM Channel Selection: Press the button to switch between 2CH, 5.1CH
or 7.1CH LPCM audio channels.
⑪ Color Space Selection: Press the button to switch between RGB444,
YCbCr444 or YCbCr422 color space.
⑫ System Reset: Press two buttons at the same time to reset the system back
to factory mode. During the system reset the LCD Display will show "SYSTEM
RESET" message.
⑬ Deep Color Selection: Press the button to switch between 8bits, 10bits or ①
bits deep colors.
⑭ EDID Pattern: Pattern 32 hot key.
⑮ OPTION: Not all the Patterns support function adjustments, when screen
shows “Press [OPTION] to do the setting”that means this pattern support
function adjustment. When user press the OPTION button the LED will
illuminate and then press Pattern +/- button to adjust the Brightness level.
Switch off the OPTION function before go to next pattern selection.
⑯ HDCP Pattern: Pattern 39 hot key.
6
Indice
Altri manuali Cypress Invertitore
