Cyron AF106AD Manuale utente

AF106AD AUXILIARY LIGHT USER MANUAL

Thank you for choosing CyronMotor products! Please read instructions

completely before starting installation.

TOOLS AND ACCESSORIES NEEDED

Some basic metric tools are included. More metric tools maybe needed. Installing auxiliary

lights on motorcycles and vehicles has many possibilities. Tools needed are dependent on

complexity of the job. Although several types of hardware are included, in some cases

additional hardware such as SAE screws could be helpful in the installation process.

CAUTION: HOT SURFACES. DO NOT TOUCH THE METAL

SURFACES OF THE HEADLIGHT. THEY CAN BE

EXTREMELY HOT.

CAUTION: Local laws vary regarding additional light and/or utilizing auxiliary lights. Make

yourself familiar with such laws before adding or deciding on how to utilize such lights.

INSTRUCTIONS

AF106AD has a precision rectangular beam pattern which makes it well suited for on-road

applications as well as off road. It can be used as an added auxiliary light to an existing low

beam setup on your ride. Just as easily by aligning the light upward it can be utilized as an

auxiliary high beam. If space is available, two AF106AD can be installed, one for low beam

and other for high bream.

INSTALLATION

Wiring AF106A will depend on your riding preferences and what aspect of night vision you

are intending to improve.

Option A. Connection to an ignition-controlled wire: This will turn on the lights every time

ignition is turned on. Use a 5A inline fuse if the supply wire is not fused.

Option B. Connection to headlight: Connected to low beam or high beam will turn on

AF106A at the same time as the headlight. Whether you choose low beam or high beam

depends on which needs more improvement in your application. Setting up one AF106A for

low beam and one for high beam is ideal.

IMPORTANT: Approximately 2A power draw will be added to headlight wiring. Normally

this is acceptable by most powersports and automotive applications. As a first step in

upgrading your lighting CyronMotor suggests converting your headlight low/high beam

bulbs to a low power draw LED technology. This will leave ample power for addition of

auxiliary lights such as AF106A.

Option C. Connection to fog/passing lights. This option gives control to turn on/off the

auxiliary lights along with fog/passing lamps. Local laws vary on usage of fog lights.

1. Choose the mounting location for the lights. Slider brackets and “L”brackets are

included. If they do not quite fit your application please ask your dealer or visit

CyronMotor.com for other mounting bracket styles.

2. Connect the wires before mounting the light in place. Account for moving parts

such as handlebar to determine the length of wire to reach the lights. If needed

extend the wires with 16AWG wires. Do not secure the wires yet. Leave some

slack in the wires.

3. Secure the light in place. Do not tighten the adjustment screws until the lights

have been aligned.

4. Secure the wires with zip ties. If mounted to lower forks or other moving parts

avoid leaving too much loose wires which could fray or get caught to other

objects. Leave just enough to clear the max extension of the moving parts.

5. Align the light. For proper operation it is vital to check the aim of the light. Use the

diagram below as a starting guide.

NOTE: For low beam applications the goal is to keep the light on the road as far

forward as possible without disturbing the oncoming traffic.

During testing make sure:

a. The vehicle is on level surface

b. There are no excessive loads in the vehicle affecting its leveling

c. For motorcycles it is a good idea to align with the rider on the bike

d. After alignment do a road test to assure proper visibility has been achieved.

Further adjustment may be necessary to get the optimum performance.

6. Tighten all the screws.

HINT: Check the alignment of the light again after a few hours on the road. To

facilitate mark the position of the light beam on garage wall after the initial

alignment. Compare at a later point to make sure the lights have remained

aligned.

WARRANTY

Cyron warrants this product against any defects in materials or workmanship for a period of 1 year from the date of purchase. The

warranty covers normal usage as intended by the factory and does not cover misuse, abuse, accidents, or damages caused due to the

acts of God. Proof of purchase is required.

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS

LIMITED WARRANTY, OTHERWISE THE REPAIR, REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS

LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED. IN NO EVENT SHALL CYRON, INC. BE LIABLE, WHETHER IN CONTRACT OR

TORT (INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT,

ACCESSORY OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, OR

LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT

THESE DAMAGES MAY BE DISCLAIMED BY LAW.

CUSTOMER AGREES TO INDEMNIFY AND HOLD HARMLESS CYRON INC, ITS OFFICERS, DIRECTORS, EMPLOYEES

AND SUCCESSORS FROM AND AGAINST ANY AND ALL LOSS, LIABILITY, DAMAGES, COSTS, ATTORNEYS’ FEES

OR OTHER EXPENSES ON ANY KIND, ON ACCOUNT OF ANY AND ALL CLAIMS, SUITS JUDGMENTS AND COSTS

ARISING OUT OF ANY ACTUAL OR ALLEGED (I) BODILY INJURY OR DEATH TO ANY PERSON; (II) LOSS, DAMAGE

OR DESTRUCTION OF PROPERTY; (III) DEFECTS IN THE PRODUCTS OR SERVICES; (IV) CLAIMS THAT A PRODUCT

OR THE SALE OF THAT PRODUCT VIOLATED ANY LOCAL, STATE OR FEDERAL LAW OR REGULATION.

Some LED products are not DOT/SAE approved. Although efforts have been made to maximize road visibility and safety, all risks are

sole responsibility of the user. For warranty claims please visit cyronmotor.com Support link or email [email protected]. Thank

you.

Other quality automotive lighting accessories from CyronMotor

Part Number Description/Application

ABxxD LED bulb Standard Mini, Fitment with ease

ABxxE LED bulb ELITE-II, all models, Cars, Trucks, Bikes

ABIG4.5-A6K Driving Lamp, Integrated LED, 4.5" Harley fog lamp

ABIG7-RNG Mounting trim ring, 7" integrated, Chrome

ABIG7-RNG-B Mounting trim ring, 7" integrated, Black

ABIGC3A Adapter H9/11 to H4, Roadking 2016+

AC1156 /57A 2" Harley turn signal LED insert, avail in Red, Amber, White Halo

AC1156 /57PF Pancake Harley turn signal LED insert, avail in Red, Amber, White Halo

ACT1156/7 Torch 2" Harley turn signal LED insert, avail in Red, Amber, White or Gold Halo

AB1157H2 Light bulb Ultra High Power 8W LED, single and dual circuits

AB1157E Light bulb High Power 6W LED, single and dual circuits

ABFT100-xx Canbus and EMI noise filter for LED headlights, H4/H7/H9 and more

RC3A12 Tri-Zone accent lighting remote

MLKP7CZ Accent light kit Platinum, Pro grade for mid size cruisers, avail in all 6 solid colors

MLKT10C2FZ Accent light kit Titanium, Pro grade for large cruisers, avail in all 6 solid colors

Ensuring undisturbed visibility of other drivers is vital to your safety.

Drive & Ride Safe!

HEADLIGHT FOGGING UP?

Fogging or condensation in the

headlight is a temporary condition

and does not cause a problem with

normal operation of your headlight.

This condition is NOT a defect. In

fact our lights are designed to allow

moisture to slowly escape the

housing, therefore minimizing

reoccurrence of condensation. The

evaporation process may take some

time.

WHY IS THIS HAPPENING?

Often times during the

manufacturing process polymers as

resins absorb small amounts of

moisture. Once the light heats up

the moisture is released and shows

up as condensation on the lens

which is the coolest part of the light.

WHY STOCK LIGHTS NEVER DID

THIS?

LEDs do not run as hot as halogen

or HIDs lamps so the moisture takes

longer to evaporate.

SIGNS OF FUTURE DAMAGE?

If large droplets or pooling of water

is present then this is a sign of

damage and can lead to a system

failure. If a pool of liquid water is

clearly visible and was NOT the

result of physical abuse and or

misuse please contact your local

dealer or Cyron tech support.

SPECIFICATIONS

[email protected]

CyronMotor.com

Operating

Voltage

10-VDC

Socket

D2 / Male+Female

Peak LED

Power, Watts

40W

Nominal Power,

High Beam

22W

Nominal Amp

Draw

1.7A

No EMI Noise

Yes, E9 Approved

Altri manuali Cyron Attrezzatura di illuminazione

Cyron

Cyron HTP1502E Manuale utente

Cyron

Cyron HTP1506E Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente