CZZN C30N Manuale utente
C30N
Smart Dual-light Night
Vision Camera
2023.05
User Manual V1.0
I. Disclaimers and Warnings.............................................. 2
II. Introduction to C30N..................................................... 3
III. Installation.....................................................................4
IV. Activation.......................................................................5
V. Control through remote controller................................6
VI. Control through czi Pilot App .......................................7
VII. Control through DJI Pilot2 App..................................16
VIII. Firmware Upgrade .................................................... 24
IX. Technical parameter ................................................... 25
Content
Reading Tips
Symbol Explanation
1
Product Precautions
1.After use, please store the device in the secure box of C30N and replace the
desiccant in a timely manner to prevent fogging of the lens due to high
environmental humidity. If fogging occurs, it usually dissipates after a period
of operation. It is recommended to store the device in an environment with
a relative humidity of less than 40% and a temperature of 20±5℃.
2.Do not aim the infrared camera lens at high-energy sources such as the
sun, lava, laser beams, etc. Ensure that the temperature of the observed
target is below 800℃ to avoid damaging the camera irreversibly.
3.Do not place the camera in direct sunlight, poorly ventilated areas, or near
the heat sources such as heaters or radiators.
4.Avoid frequent power-on or power-off of the payload camera. Re-start the
device at a at least 30-second interval to avoid impacting the lifespan of
camera.
5.Since the supplementary light of C30N is classified as a Class 1 non-visible
laser, it is strictly prohibited to direct view against the light or observe the
laser beam with optical instruments when the laser light is turned on.
6.Under normal operation of the IR spotlight of C30N, flammable objects
must not be within 100cm in front of the lens to prevent fires.
7.Ensure that the payload interface and surface are dry and free from water
before installation.
8.Before use, ensure that the payload gimbal is securely installed on the
drone, and the SD card protective cover is clean, with no foreign objects and
closed properly.
9.Clean the surface of the device before opening the SD card protective
cover.
10.Do not insert or remove the microSD card during the operation.
11.Avoid direct contact with the camera lens surface coating using hands or
scraping with hard objects, otherwise, it may cause blurry imaging and affect
image quality.
12.When cleaning the camera lens, wipe the lens surface with a soft and dry
cleaning cloth. Do not use alkaline cleaning agents for cleaning.
Prohibition Warning
1
I. Disclaimers and Warnings
Thank you for purchasing our intelligent product. The contents mentioned
in this article are related to your safety and legitimate rights and
responsibilities, so please read this article carefully to set up the product
correctly before using. Harms of hurting you or the people around you or this
product or other surrounding items may be caused as a result of failing to
follow the instructions and warnings herein. The right for final interpretation
of this article and all related documents is vested in CZI. Subject to update
without notice. Please visit www.gzczzn.com for the latest product
information.
Warnings
1.·When using C30N, it is necessary to use a single payload gimbal and replace the
customized dampers to avoid damage to the original dampers due to excessive
load weight.
2.Since the IR spotlight of C30N is classified as a Class 1 non-visible laser, it is
strictly prohibited to direct view against the light or observe the laser beam
with optical instruments when the laser light is turned on.
3.Under normal operation of the IR spotlight of C30N, flammable objects must
not be within 100cm in front of the lens to prevent fires.
4.In case of hardware issues, please return the product to the factory for
maintenance. Do not disassemble it on your own, otherwise, any adverse
consequences to the product resulting from it will be the sole responsibility of
the users.
Precautions
1.The installation method of C30N is the same as that of other payloads.
Please ensure that the adapter ring is correctly installed.
2.Before the drone takes off, the power of the laser IR spotlight of C30N will
be limited to 10% or below. After takeoff, its power can reach 100%.
2
II. Introduction to C30N
CZI C30N smart dual-light night vision camera is equipped with a 1K resolution
long-wave infrared uncooled thermal imaging camera, a zoom visible light
camera, and an infrared spotlight. The thermal imaging with a resolution of
1280 and a focal length of 55mm enables users to conduct long-range
searches of suspected targets during nighttime. Additionally, it allows for
quick switching to a 30x enhanced optical zoom for detailed observation. The
infrared spotlighting provides illumination for the visible light camera IR cut
filter in low-light and no-light conditions, enhancing the image details and
providing richer visual information during nighttime observations. The C30N is
also equipped with a laser ranging device, which can accurately calculate the
distance and target position. Additionally, the coordinates of the target can be
shared with frontline operatives and command centers through the QR code
sharing function in the czi App, making rescue and security operations easier.
The C30N is also equipped with an integrated high-precision three-axis gimbal
which can be easily installed on the Matrice 300/350 RTK drone for operation.
With the czi pilot app or DJI Pilot 2 app, users can achieve real-time monitoring
of the captured footage on their mobile devices, and capturing photos and
recording videos as well.
①
②
③
④
⑤
⑥
⑦
⑧
1.Interface 2.Pan Axis Motor 3.Laser Rangefinder + Infrared Laser IR spotlight
4.Zoom Camera 5.Long-range Infrared Camera 6.Tilt Axis Motor
7.Tilt Axis Motor 8.microSD Slot
3
III. Installation
Supported drone types
Matrice 300/350 RTK
Please replace the damper for the first-time use.
Install it into the drone
1. Remove the gimbal interface protective cover and lens protective cover.
4
2. Insert the C30N into the installation position of the Matrice 300/350 RTK
payload after aligning the white dot and red dot, then rotate the payload
interface to the locking position to secure the payload.
·The structure of payload interface is designed to be compact, so please
use your hand to firmly hold the mounting platform while applying force to
rotate it when installing or removing.
·During use or storage, please ensure to cover the micro SD card slot with
the protective cover to prevent moisture or dust from entering
①
IV. Activation
The new C30N payload camera must be activated through the czi pilot App.
Please ensure that the payload camera has been installed on the drone before
powering on both the drone and the remote controller. Follow the
instructions on the remote controller interface to proceed with the activation.
During the activation process, the remote controller needs to be connected to
the Internet.
5
②
The payload cannot be operated before activating the device.
6
6
1. Left Thumb Wheel
It is for controlling the pitch angle of gimbal payload.
2. Video recording button
Press it once to start recording, and press it again to stop recording.
3. Photo-shooting button
Press it once to capture a photo. During video recording, pressing this button
also can capture a photo.
4. Right Thumb Wheel
It is for controlling the pan angle of gimbal payload.
5. Five-dimensional button
It can be customized for different functions using the DJI Pilot 2 App.
6. Custom Function Button C2
It is defaulted to switch the main and secondary camera views, and can be
customized for different functions using the DJI Pilot 2 App.
7. Custom Function Button C1
It is defaulted to make the gimbal payload back to the center, and can be
customized for different functions using the DJI Pilot 2 App.
V. Control through remote controller
The left and right thumb wheels on the remote controller are used to control
the pitch and pan angles of the payload respectively. The photo-shooting and
video recording can be controlled using the designated buttons on the remote
controller. The custom function button C1 can direct the payload back to the
center, while the custom function button C2 can be used to switch between
the main and secondary camera views.
1
24
3
57
6
VI. Control through czi Pilot App
In addition to the functions set on the remote controller, czi Pilot App also
provides other more intuitive and convenient settings options, such as
screen display switching, visible/thermal imaging linked zoom, infrared
pseudo-color switching, laser ranging, camera parameter settings, etc.
The interface images below are for reference only. The actual effects may vary depending on the
version of the App provided
Basic Functions
On the camera page, you can preview the captured image of C30N and make
camera parameter adjustments.
Below is an example of the main screen displaying the zoom camera view.
1. Camera Parameter - Shutter Speed Value
It displays the current camera and its corresponding shutter speed value for
the main screen. Can be set only available for manual exposure mode or
shutter priority mode.
2. Camera Parameter - Aperture Value
It displays the current camera and its corresponding aperture value for the
main screen. Can be set only available for manual exposure mode or
aperture priority mode.
3. Camera Parameter - Exposure Value
It displays the current camera and its corresponding exposure value for the
main screen. Can be set only available for auto exposure mode.
1
12
11
13
16
14
17
15
18
21
23
24
25
2019 2 3 4 5 6 7 8 9 10
7
Indice
