zKeep work area well lit.
zAvoid body contact with earthed or grounded surfaces (e.g. pipes,
radiators, ranges, refrigerators).
zDo not let persons, especially children, not involved in the work
touch the tool or the extension cord and keep them away from the
work area.
zWhen not in use, tools should be stored in a dry locked-up place,
out of reach of children.
zDo not force small tools to do the job of a heavy-duty tool.
zDo not use tools for purposes not intended; for example do not
use circular saws to cut tree limbs or logs.
zDo not wear loose clothing or jewelry; they can be caught in moving
parts.
zNon-skid footwear is recommended when work out doors
zWear protective hair covering to contain long hair.
zWhere possible use clamps or a vice to hold the work. It is safer
than using your hand.
zKeep cutting tools sharp and clean for better and safer
performance.
zFollow instruction for lubricating and changing accessories.
zInspect tool cords periodically and if damaged have them repaired
by an authorized service facility.
zKeep handles dry, clean and free from oil and grease.
zWhen not in use, before servicing and when changing accessories
such as blades, bits and cutters, disconnect tools from the power
supply.
zForm the habit of checking to see that keys and adjusting wrenches
are removed from the tool before turning it on.
zWatch what you are doing, use common sense and do not operate the
tool when you are tired.
zBefore further use of tool, it should be carefully checked to
determine that it would operate properly and perform its intended
function.
zCheck for alignment of moving parts, binding of moving parts,
breakage of parts, mounting and any other conditions that may
affect its operation.
zA guard or other part that is damaged should be properly repaired
or replaced by an authorized service centre unless otherwise
indicated in the instruction manual.
zHave defective switches replaced by an authorized service centre.
zDo not use the tool if the switch does not turn it on and off.
zThis electric tool complies with the relevant safety rules.
Qualified persons using original spare parts should only carry
out repairs, otherwise this may result in considerable danger to
the user.
3
