D-Link mydlink DCH-B122 Manuale utente
DCH-B122
User Manual
Smart Motion Sensor
Hardware: A1
Manual Version: 1.00
08/14/2019
iD-Link DCH-B122 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify
any person or organization of such revisions or changes. Information in this document may become obsolete as our services
and websites develop and change. Please refer to the www.mydlink.com website for the most current information.
Manual Overview
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks
of their respective companies.
Copyright © 2019 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from
D-Link Corporation, Inc.
Manual Revisions
Revision Date Description
1.00 August 14, 2019 Initial release
iiD-Link DCH-B122 User Manual
Table of Contents
Table of Contents
Product Overview..............................................................1
Package Contents.........................................................................1
Introduction ...................................................................................2
System Requirements.................................................................2
Hardware Overview..................................................................... 3
Installation.........................................................................4
Safety ................................................................................................4
Before you Begin...........................................................................4
Wireless Installation Considerations...................................... 5
Precautions.....................................................................................6
mydlink App Device Setup........................................................7
Using the mydlink App....................................................11
Accessing Your Device..............................................................11
Troubleshooting..............................................................13
Technical Specications..................................................14
Regulatory Information ..................................................15
1D-Link DCH-B122 User Manual
Section 1 - Product Overview
Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
Note:
for this product.
DCH-B122 || Smart Motion Sensor
IC Model：DCH-B122A1
CR2450 BatteryQuick Installation Guide
Spare Double-sided Tape Piece
Mounting Bracket with Double-sided Tape
2D-Link DCH-B122 User Manual
Section 1 - Product Overview
Introduction
The DCH-B122 Smart Motion Sensor is a wireless sensor that connects to the DCS-8330LH Smart Full HD Wi-Fi Camera as
well as other mydlink Smart DIY devices with built-in hub functionality. You can install the device in places you want to
detect motion. If the sensor is triggered, it will send push notications to your mobile device, which helps you keep tabs on
your home while you are away. You can also set up automation rules to trigger other devices such as the DSP-W118 Wi-Fi
Smart Plug, where for example you can tell the smart plug to turn on the lamp when you enter a room.
System Requirements
Network Requirements
• A mydlink Smart DIY device that has smart home hub functionality
• An Internet connection
• A router connected to your broadband modem
mydlink™ App Requirements
• iPhone, iPad, Android smartphone or tablet (please refer to the mobile
app's store page to check whether your device is compatible)
• Email account (for mydlink™ service registration)
3D-Link DCH-B122 User Manual
Section 1 - Product Overview
Hardware Overview
1 Status LED
Blinking red every 1 second Waiting for pairing.
Rapidly blinking red every 0.2 second Successfully reset.
Solid red Pairing completed.
O Power saving mode. Waiting to be triggered.
2 Motion Sensor Detects motion up to 16 feet away.
3 Tamper Key Detects if the mounting bracket used to mount the sensor has been removed.
4Battery Cover Plate Screw Remove this screw to remove the battery cover plate to reveal the battery as well as the reset button.
5 CR2450 Battery When the battery runs out of power, press down on the battery to snap it out. Replace with the same
CR2450 3V type battery. Lightly press down to snap the replacement battery into place.
6 Reset Button Press and hold the Reset Button until the LED blinks red in order to reset the sensor to factory default
settings.
7 Mounting Bracket DCH-B122 ships with this already attached with double-sided tape covered by a sticker adhered to it.
Slide down to remove.
Front Back
2
1
6
4
Battery Cover RemovedBattery Cover Attached
5
7
3
Mount
4D-Link DCH-B122 User Manual
Section 2 - Installation
Please read all of the safety and operating instructions before using your device:
• Do not open the device or attempt to repair or service it.
• Use the device in a dry location, and avoid placing it in a humid environment.
• Do not submerge the device in liquid or attempt to clean it with liquids or solvents. To clean the device, remove the
battery and use a damp towel to wipe it.
• This device should only be used indoors.
Before you Begin
Plan the location of your devices:
• Verify that your device is within wireless range of a mydlink Smart DIY hub device.
• Mount the sensor in a place that will detect motion within 16 feet.
• Ensure that the sensor is not directly facing a source of heat.
• Make sure that the device is rmly mounted and won't fall o.
Installation
Safety
5D-Link DCH-B122 User Manual
Section 2 - Installation
Wireless Installation Considerations
The DCH-B122 Smart Motion Sensor connects to your network using a wireless connection from virtually anywhere within the
operating range of your mydlink Smart DIY hub device. Keep in mind that the number, thickness and location of walls, ceilings,
or other objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types
of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the product and other network devices to a minimum - each
wall or ceiling can reduce your device's range from 1 to 30 meters (3 to 90 feet). Position your devices so that the
number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 0.5 meters (1.5 feet) thick, at a 45-degree
angle appears to be almost 1 meter (3 feet) thick. At a 2-degree angle it looks over 14 meters (42 feet) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on
range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or
open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors,
le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away at least 1 to 2 meters (3 to 6 feet) from electrical devices or appliances that generate RF
noise.
6D-Link DCH-B122 User Manual
Section 2 - Installation
Precautions
Caution:
Make sure that the sensor is not directly facing the sun or a source of heat.
Proper Placement:
Place the sensor at least 8 feet or higher from the ground. The maximum distance of the motion detection is 16 feet.
Improper Placement:
Do not place the sensor directly on top of a surface or in a spot where there is something directly below it, obstructing its
view.
8 ft
16 ft
max
7D-Link DCH-B122 User Manual
Section 2 - Installation
mydlink App Device Setup
Launch the mydlink app and create a new account or sign in to your
existing account.
Note:On iOSdevices,the appwill popup a permissionrequestto sendnotications.
2/
Download the mydlink app from the App Store (iOS) or Google Play
(Android) by scanning the QR code.
1/
Altri manuali per mydlink DCH-B122
1
Indice
Altri manuali D-Link Accessori
D-Link
D-Link DSP-W320 Manuale utente
D-Link
D-Link DSP-W118 Manuale utente
D-Link
D-Link mydlink DCH-S160 Manuale utente
D-Link
D-Link DCH-112 Manuale utente
D-Link
D-Link DCH-T160A Manuale utente
D-Link
D-Link MyDlink DCH-S150 Manuale utente
D-Link
D-Link PST02-A Manuale utente
D-Link
D-Link DCH-Z110 Manuale utente
D-Link
D-Link MyDlink DCH-S150 Manuale utente
D-Link
D-Link MyDlink DCH-S150 Manuale utente
D-Link
D-Link DSP-T115A Manuale utente
D-Link
D-Link DSP-W115 Manuale utente
D-Link
D-Link DCH-S161 Manuale utente
D-Link
D-Link MyDlink DCH-S150 Manuale utente
D-Link
D-Link mydlink DCH-S160 Manuale utente
D-Link
D-Link DCH-Z122 Manuale utente
D-Link
D-Link DHP-348AV Manuale utente
D-Link
D-Link mydlink DSP-W110 Manuale utente
D-Link
D-Link DCH-Z120 Manuale utente
D-Link
D-Link mydlink DCH-S160 Manuale utente
