D-Link DFE-530TX+ Manuale utente
First Edition (July 2005) P/N: 6F530TX+ML01
• DFE-530TX+ PCI Fast Ethernet Adapter
• Printed Quick Installation Guide
• CD with Manual and Drivers
If any of the above items are missing, please contact your reseller.
Install the DFE-530TX+ Adapter
Before you start, make sure to turn off your computer and unplug the power cord.
Note: To avoid damage caused by static electricity, make sure to properly ground
yourself by first touching a metal part of your computer to discharge any static
electricity before working with the DFE-530TX+ PCI Fast Ethernet Adapter.
• Remove the back cover of the computer.
• Install the DFE-530TX+ carefully and firmly into an available PCI slot
which is usually “white” or “cream” colored
• Secure the DFE-530TX+ with a screw.
• Replace the computer’s cover.
DFE-530TX+
PCI Fast Ethernet
A
dapte
r
For Windows XP,
Server 2003
Contents of Package
2
Install the DFE-530TX+ Driver
• Turn on the computer.
• Insert the driver CD, which is included with the DFE-530TX+, into the
CD-ROM drive.
The following window will open automatically:
Click the first item, Install Driver.
The following initial Install Shield Wizard window will open:
3
The following second Install Shield Wizard window will open:
The following final Install Shield Wizard window will open:
Click the first item, Install Driver. Click the first item, Install Driver.
Select the “Yes, I want to restart my computer now” radio button and then
click Finish.
4
• DFE-530TX+ PCI Fast Ethernet Adapter
• Printed Quick Installation Guide
• CD with Manual and Drivers
If any of the above items are missing, please contact your reseller.
Pre-installation Procedures:
If you have already installed the DFE-530TX+ into a PCI slot, advanced users may
utilize the “Add New Hardware Wizard” to manually specify the location of the driver
on the CD-ROM.
Otherwise, we strongly recommend canceling the “Add New Hardware Wizard”
and instead using the “Install Drivers” program in the CD-ROM.
Here is quick summary of the proper installation procedure:
• Run the driver installation from the DFE-530TX+ CD-ROM.
• Turn off the computer and install the DFE-530TX+ into the PCI slot.
• Restart the computer to complete the installation.
DFE-530TX+
PCI Fast Ethernet
A
dapte
r
For Windows 98,
ME, 2000
Contents of Package
DO NOT insert the DFE-530TX+ into the computer’s
PCI slot before installing the drivers.
5
Install the DFE-530TX+ Driver
• Turn on the computer.
• Insert the driver CD, which is included with the DFE-530TX+, into the
CD-ROM drive.
The following window will open:
Click the first item, Install Driver.
The following initial Install Shield Wizard window will open:
6
The following final Install Shield Wizard window will open:
Select the “Yes, I want to restart my computer now” radio button and then
click Finish.
Turn off PC and Unplug the Power
Note: To avoid static electric charges, please touch an unpainted
screw on the outside of the power supply before installing or working
with the DFE-530TX+.
7
• Turn off your computer and unplug the power cord.
• Remove the back cover of your computer. (Refer to your computer’s
manual if needed.)
• Locate an available PCI slot. PCI slots are usually white or cream colored.
• Remove the backplate (the small piece of metal that covers the opening
for the PCI card on the back cover that you just removed.)
• Insert the DFE-530TX+ carefully and firmly into the PCI slot.
• Secure the DFE-530TX+ with the screw from the backplate.
• Replace your computer’s cover.
• Turn on the computer.
For Windows 2000/98/98SE and Windows ME users, the following dialog
box will appear.
Click Yes to restart the computer.
Double-Check Your Settings
• Go to Start>Run.
• Type “winipcfg.” (In Windows 2000, type “ipconfig/all.”) In some
cases it may be necessary to “Release and Renew” the IP
address. Make sure to select the DFE-530TX+ as the specified
adapter in the pull-down menu.
• If the IP address belongs to the same IP range and subnet
mask as the local network, then open the web browser and test
the Internet connection.
8
• DFE-530TX+ PCI Fast Ethernet Adapter
• Printed Quick Installation Guide
• CD with Manual and Drivers
If any of the above items are missing, please contact your reseller.
Requirements:
• PowerPC-based Macintosh with free PCI slot
• Operating System 8.0 or higher
Installation Procedure:
1. Install the DFE-530TX+ Adapter
2. Install the Driver
3. Configure Network Services
Install the DFE-530TX+ Adapter into
the Macintosh’s PCI Slot
• Turn off the Macintosh
• Insert the DFE-530TX+ into an available PCI slot
DFE-530TX+
PCI Fast Ethernet
A
dapte
r
For Macintosh 8.0
or higher
Contents of Package
9
Install the DFE-530TX+ Driver
• Turn on the Macintosh
• Insert the CD-ROM into the Macintosh’s CD-ROM drive
Double-click the DFE_530TX+LUS icon that appears on the desktop.
Double-click the Macintosh folder.
10
Double-click the MacOSX folder.
Double-click dlkfet.dmg to place a dlkfet icon on the desktop.
Altri manuali per DFE-530TX+
8
Indice
Altri manuali D-Link Adattatore
D-Link
D-Link DWA-132 Manuale utente
D-Link
D-Link DE-528CT Manuale utente
D-Link
D-Link 802.11g Wireless LAN USB Adapter DWL-G122 Manuale utente
D-Link
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... Manuale utente
D-Link
D-Link DWL-P50 Manuale utente
D-Link
D-Link DWA140 - RANGE BOOSTER N USB ADAPTOR Manuale utente
D-Link
D-Link WDA-2320 RangeBooster G Manuale utente
D-Link
D-Link DWM-156 Manuale
D-Link
D-Link DWA-162 Manuale utente
D-Link
D-Link DFE-530TX Manuale utente
D-Link
D-Link DUB-E130 Manuale utente
D-Link
D-Link DWA-131 Manuale utente
D-Link
D-Link D DPH-50U DPH-50U Manuale utente
D-Link
D-Link DWA-182 Manuale utente
D-Link
D-Link PersonalAir DBT-120 Manuale utente
D-Link
D-Link DWA-192 Manuale utente
D-Link
D-Link PowerLine DHP-302 Manuale utente
D-Link
D-Link DWA-171 Manuale utente
D-Link
D-Link VTA-VR Manuale utente
D-Link
D-Link DWL-G550 Manuale utente
