D-Link DWL-P100 Manuale utente

DWL-P100

Power-Over-Ethernet Adapters

Manual

- -

Introduction

About Power Over Ethernet (POE)

The DWL-P100 Power Over Ethernet (POE) Adapters are design to supply

operational power to a Wireless Access Point. These Power Over Ethernet

Adapters give users the ability to mount an Access Point virtually anywhere

in a building no matter where the power outlet is located such as ceilings,

attics, or roofs. It eliminates the need to use an AC-DC power supply at the

Access Point making the setup more convenient. D-Link’s DWL-P100 Power

Over Ethernet Adapters take advantage of the unused cable pairs within

Ethernet Cat 5 cabling. The Base Unit inserts DC voltage into the unused

wires therefore allowing the single Category 5 cable to carry both Ethernet

data and DC power to an Access Point. The POE Terminal Unit splits the data

and DC power apart, which is then supplied to theAccess Point.

- -

Contents of Package

(1) (2)

(6)

1. D-Link Power Over Ethernet / Base Unit

2. D-Link Power Over Ethernet / Terminal Unit

3. AC/DC power Adapter

4. Ethernet Cable

5. Quick Installation Guide

6. DC Power cable

- -

The D-Link DWL-P100

The DWL-P100 includes two modules:

•Power Over Ethernet / Base Unit

•Power Over Ethernet / Terminal Unit

The Base Power Over Ethernet module plugs into the wall AC outlet and also

connects to the wired hub. This will supply both low-voltage DC power and

data over the existing Category 5 cabling. The Terminal Power Over

Ethernet module separates the DC power and data, and connects conveniently

to the Wireless Access Point.

Features

Provides DC power over existing Category 5 cabling toAccess Points

Transforms incoming AC power into low-voltage DC power

Base and Terminal Power Over Ethernet modules powers any Wireless

Access Point requiring 5V/1A DC input

Protects Access Point from possible damages due to power-surges

- -

Connection Architecture

- -

Specifications

Category 5 pin power usages: 4/5 , 7/8

Output Voltage 5VDC/1A (Terminal side)

Ethernet Connector: RJ-45

Ethernet Data Rate: 10/100 Mbps

Number of AP’s it can power: 1

Ethernet Data Cable: TIA/EIA-568, Category 5 Cable

Device Weight (pair): 0.269 lbs

Dimensions: 3.15in x 1.73in

Hardware Installation

1. Connect the cable from the PC/Hub/Switch to the Base Unit “LAN IN”

2. Connect the Power Adapter to the Base Unit “DC 15V IN.” The green

PWR LED on the Base Unit should light up.

3. Connect the cable from the Base Unit “LAN OUT” to the “LAN IN” of

the Terminal Unit. (max cable length up to 328ft/100m, as defined by

IEEE 802.3)

4. Connect an Ethernet cable from the Terminal Unit “LAN OUT” to the

LAN port of the Wireless Access Point (AP).

5. Connect the “DC 5V OUT” from the Terminal Unit to the DC 5V input

port of the AP using the power cable provided. The green PWR LED of

the Terminal Unit should light up.

6. Operate the Wireless Access Point normally.

- -

Contacting Technical Support

You can find software updates and user documentation on the D-Link

website.

D-Link provides free technical support for customers within the United

States and within Canada for the duration of the warranty period on

this product.

U.S. and Canadian customers can contact D-Link technical support

through our

Web site, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

Monday through Friday 7:00am to 12:00am.

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

- -

Monday to Friday 8:30am to 9:00pm EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

When contacting technical support, please provide the following

information:

· Serial number of the unit

· Model number or product name

· Software type and version number

Building Networks for People

020205

Altri manuali per DWL-P100

Indice

Altri manuali D-Link Adattatore

D-Link

D-Link DWA-192 Manuale utente

D-Link

D-Link DWL-G820 - AirPlus Xtreme G Manuale utente

D-Link

D-Link DWA-192 Manuale utente

D-Link

D-Link DWL-P50 Manuale utente

D-Link

D-Link 802.11g Wireless LAN USB Adapter DWL-G122 Manuale utente

D-Link

D-Link DWL-P100 Manuale utente

D-Link

D-Link DSM-260 Manuale utente

D-Link

D-Link DFE-528TX Manuale utente

D-Link

D-Link AirPlus XTREME G+ DWL-G650+ Manuale utente

D-Link

D-Link PowerLine DHP-302 Manuale utente

D-Link

D-Link PersonalAir DBT-320 Manuale utente

D-Link

D-Link PersonalAir DBT-120 Manuale utente

D-Link

D-Link Air DCF-660W Manuale utente

D-Link

D-Link DWL-G520M Manuale utente

D-Link

D-Link DWA-142 Manuale utente

D-Link

D-Link DUB-C2 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

D-Link

D-Link DGE-550SX Manuale utente

D-Link

D-Link DHP-700AV Manuale utente

D-Link

D-Link PersonalAir DBT-120 Manuale utente

D-Link

D-Link DWM-156 Manuale utente

D-Link

D-Link DUB-2315 Manuale utente

D-Link

D-Link DWA-566 Manuale utente

D-Link

D-Link DWA-192 Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente

RCA

RCA AH57R Manuale utente