D-Link DAP-1720 Manuale utente

DAP-1720

Quick Install Guide

AC1750 Wi-Fi

Range Extender

DAP-1720 Install Guide

Package Contents

DAP-1720 AC1750 Wi-Fi Range Extender

Wi-Fi Conguration Card

Quick Install Guide

If any of the above items are missing, please contact your reseller.

• Make sure the area that you want to plug the extender into has

a solid connection to your router. Use a wireless laptop, tablet, or

mobile phone in that area to test the connection to verify.

• If your wireless router or access point does not support WPS,

follow the steps under Congure the DAP-1720 Using a Web

Browser to connect to the DAP-1720 and run the Setup Wizard.

If you are not sure how to enable WPS on your wireless router,

please refer to your router’s user manual.

Before You Begin

DAP-1720 Install Guide

Product Overview

Status LED

Signal

Strength

Indicators

WPS Button

LED Color Status Description

Status LED

Red Solid The device is powering on/booting up.

Amber Blinking The device is ready but not connected to an uplink

router.

Green

Solid Indicates that the DAP-1720 is securely connected

to your wireless router or access point.

Blinking The WPS button has been pushed and the device is

processing a connection.

Signal Strength Indicators

Very Weak (Amber) Weak (Green) Good Best

Ethernet

Port

Reset

Button

On/O

Switch

DAP-1720 Install Guide

Connect to Your Router

Using WPS

1Find an available outlet near your wireless

router. Plug in the DAP-1720 and wait until

the Status LED is blinking amber.

2Press the WPS (Wi-Fi Protected Setup)

button on your wireless router.

Within one minute, press the WPS button

on the DAP-1720. The Status LED will start

to blink green.

DAP-1320

DAP-1720 Install Guide

4When the Status LED turns solid green, this indicates that the DAP-1720 is

securely connected to your wireless router or access point. You can now

unplug and move the DAP-1720 to a location between your wireless router

and the area that you need wireless coverage.

If the signal strength indicators are showing one single

amber bar or if the DAP-1720 is not connecting, move

the DAP-1720 to a wall outlet closer to your wireless

router or access point.

DAP-1720 Install Guide

Connect Your Wireless Devices

6Your device is now connected to the DAP-1720 and can connect to your

wireless router. If you want to change your network settings, password, etc.,

follow the steps on the next page to congure the DAP-1720. To connect

additional devices, repeat step 5.

Your setup is complete!

Extended

network

Original

network

From your wireless device go to the Wireless Utility to display the available

wireless networks.

The SSID on the DAP-1720 will automatically be assigned the following:

• 2.4GHz (Your Router’s SSID)-EXT

• 5GHz (Your Router’s SSID)-EXT5G

The Wi-Fi password for the DAP-1720 will be the same as your router.

Repeat step 5 to connect additional Wi-Fi devices to the DAP-1720.

DAP-1720 Install Guide

Congure the DAP-1720

Using a Web Browser (Optional)

Wi-Fi Name(SSID) 2.4Ghz:

dlink-xxxx

Wi-Fi Name(SSID) 5GHz:

dlink-xxxx-5GHz

Password: xxxxxxxx

To congure your extender, go to:

http://dlinkap.local.

Or http://192.168.0.50

Username: “Admin”

Password:”“ (leave the eld blank)

Open the wireless utility on your wireless device or computer. Select the

Wi-Fi Network name (from the Wi-Fi Conguration Card) and enter the

password. You may also connect the DAP-1720 to your router or computer

using an Ethernet cable.

You may log into the web-based conguration utility on the DAP-1720 to perform

the following tasks:

• Upgrade rmware

• Change wireless and network settings

• Change the login password

1Plug the DAP-1720 in an available outlet near your router. You may move it

to a more suitable location after conguration.

Open a web browser (e.g., Internet Explorer, Firefox, Safari, or Chrome)

and enter http://dlinkap.local./. You may also enter the IP address of the

DAP-1720.

DAP-1720 Install Guide

Once you connect, the login page will appear. Enter your password and click

Note: If this is the rst time logging in to the DAP-1720, you will be directed to

the Wizard automatically. Skip to step 6.

Note: The default IP address is 192.168.0.50. Once the DAP-1720 connects to

your router, it will get assigned a new IP address based on your router/network’s

DHCP settings. You will need to log in to your router and view the DHCP table to

see what IP address was assigned to the DAP-1720. The MAC address is printed

on the label on the device.

The home page will display your current status. A green check mark

represents a successful connection to your wireless router or Access Point

(AP). A red X means there is not a connection to your router or access point.

Click the Uplink Router icon.

DAP-1720 Install Guide

Select your language from the drop-down menu and then click Next.

The WPS process will be started on the DAP-1720 automatically. Press the

WPS button on your wireless router or access point.

If you want to manually select the wireless network you want to extend, click

Extend an existing wireless network and go to the next page. If you want

to connect the DAP-1720 to a wired network using an Ethernet cable, click

Add wireless to your wired network and skip to page 11.

DAP-1720 Install Guide

A list of detected wireless networks within range of the DAP-1720 will

appear. Click on the network you want to extend. If you want to manually

type in the Wi-Fi network name (SSID), click Manual at the bottom.

If your wireless network is secure/encrypted, enter the Wi-Fi password and

click Next to continue.

If you clicked“Extend an existing wireless network”

If you clicked Manual, enter the SSID and security information (Wi-Fi

password) of the wireless network you want to extend and click Next to

continue.

Skip to page 12 to continue

Altri manuali per DAP-1720

Indice

Lingue:

Altri manuali D-Link Estensione

D-Link

D-Link DHP-W311AV Manuale utente

D-Link

D-Link AirPlus G DWL-G710 Manuale utente

D-Link

D-Link DHP-W306AV Manuale utente

D-Link

D-Link DHP-W306AV Manuale utente

D-Link

D-Link EXO AC2000 Manuale utente

D-Link

D-Link AMPLIFI DAP-1525 Manuale utente

D-Link

D-Link DCH-M225/A1A Manuale utente

D-Link

D-Link DHP-W306AV Manuale utente

D-Link

D-Link DAP-1520 Manuale utente

D-Link

D-Link DWL-G800AP Manuale utente

D-Link

D-Link DAP-1320 Manuale utente

D-Link

D-Link DAP-1120 Manuale utente

D-Link

D-Link AirPlus G DWL-G710 Manuale utente

D-Link

D-Link DAP-1360 Manuale utente

D-Link

D-Link DAP-1820 Manuale utente

D-Link

D-Link DAP-1320 Guida di riferimento

D-Link

D-Link N300 DAP-1320 Manuale utente

D-Link

D-Link DHP-W310AV Manuale utente

D-Link

D-Link AMPLIFI DAP-1525 Manuale utente

D-Link

D-Link DCH-M225 Manuale utente

D-Link

D-Link DAP-1620 Manuale utente

D-Link

D-Link DAP-1520 Manuale utente

D-Link

D-Link DAP-1900 Manuale utente

D-Link

D-Link DAP-1620 Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente