D-Link DAP-1820 Manuale utente

DAP-1820

Quick Install Guide

AC2000 Mesh Wi-Fi Range Extender

2DAP-1820 Install Guide

Package Contents

DAP-1820 AC2000 Mesh Wi-Fi Range Extender

Quick Install Card

Quick Install Guide

If any of the above items are missing, please contact your reseller.

• For setup, you will want your Range Extender to be plugged into

an available outlet as close to your Wi-Fi Router as possible. Once

setup is complete, you can plug it into an outlet in the area between

your Wi-Fi router and where you want improved coverage. See the

Troubleshooting section for tips on Wi-Fi Extender placement.

• If your wireless router or access point does not have a

WPS button ( , ), follow the steps under Method Two: D-Link

Wi-Fi Setup to set up your Range Extender.

Before You Begin

DAP-1820 Install Guide 3

Product Overview

LED Color Status Description

Status LED

Red Solid The device is powering on.

Amber Blinking The device is ready but not connected to a router or

access point.

Green

Solid Indicates that the range extender is securely

connected to your wireless router or access point.

Blinking The WPS button has been pushed and the device is

establishing a connection.

Signal Strength Indicator

Very Weak (1 x Amber) Weak (1 x Green) Good (2 x Green) Strong (3 x Green)

Signal

Strength

Indicator

Status

LED

WPS

Button

Ethernet

Port

Reset

Button

4DAP-1820 Install Guide

Once conrmed that the WPS light is blinking on

your router, within one minute, press the WPS

button on your Range Extender for 2-3 seconds.

The Status LED should start to blink green.

1Plug your Range Extender into an available outlet

near your wireless router and wait until the

Status LED is blinking amber (this may take up

to 3 minutes). You can move it to a more suitable

location after it is set up.

DAP-1320

WPS

IMPORTANT

WPS may be disabled on some Routers or Modems.

If the WPS Status LED on your Router or Modem

does not start blinking when you have pressed the

WPS button, try again and hold it a little longer. If

it still does not blink, STOP, and congure your

Range Extender using Method Two: D-Link Wi-Fi

Setup, on page 6.

WPS

2Press the WPS (Wi-Fi Protected Setup) button on

your wireless router for 3 seconds. Look for the

WPS light ( , ) on your router and make sure

it is blinking. If it does not blink, see the important

note below.

Method One: Quick WPS Setup

There are two easy ways to set up your Range Extender.

It is recommended that you use Method One. If your router does not have

a WPS button ( , ), see Method Two: D-Link Wi-Fi Setup, on page 6.

DAP-1820 Install Guide 5

4When the Status LED turns solid green (may take up to 3 minutes), this indicates

that your Range Extender is securely connected to your wireless router.

Note: If the Status LED on your Range Extender does not turn solid green

after running WPS setup, try resetting the unit (see Troubleshooting - What

if I forgot my Range Extender’s Admin password or want to reset my Range

Extender?) and try WPS setup again. If it still does not turn solid green after

following all the steps, see Method Two: D-Link Wi-Fi Setup, on page 6.

Signal Strength Indicator

Very Weak (1 x Amber) Weak (1 x Green) Good (2 x Green) Strong (3 x Green)

Your setup is complete! You can now unplug and move your Range Extender to a

locationbetweenyourWirelessRouterandtheareawhereyou wantwireless coverage.

By default, your Range Extender will share the same name and password as your

Router.

If after moving your Range Extender, the signal strength indicator is showing one

single amber bar or if your Range Extender LED does not turn solid green within 3

minutes, move your Range Extender to a wall outlet closer to your wireless router.

6DAP-1820 Install Guide

Method Two: D-Link Wi-Fi Setup

1Search for “D-Link Wi-Fi” on the App Store or

Google Play and download the D-Link Wi-Fi App to

your iPhone, iPad, or Android device.

Launch the D-Link Wi-Fi App on your mobile device and follow the

on-screen instructions to complete the setup.

When asked to scan the setup QR Code, scan the QR Code located on

the Quick Install Card.

D-Link Wi-Fi App

DAP-1820 Install Guide 7

Signal Strength Indicator

Very Weak (1 x Amber) Weak (1 x Green) Good (2 x Green) Strong (3 x Green)

Your setup is complete! You can now unplug and move your Range Extender to a

locationbetweenyourWirelessRouterandtheareawhereyou wantwireless coverage.

By default, your Range Extender will share the same name and password as your

Router.

If after moving your Range Extender, the signal strength indicator is showing one

single amber bar or if your Range Extender LED does not turn solid green within 3

minutes, move your Range Extender to a wall outlet closer to your wireless router.

8DAP-1820 Install Guide

Troubleshooting

Why can’t I connect to my wireless router or my wireless connection drops?

1. Verify that your Range Extender is within range of your wireless router.Try plugging

it into a location closer to the router and verify the Status LED is solid green.

2. Note that when extending a wireless signal from a router or access point, devices

connected to the Range Extender will not get the same speed/throughput as when

connected directly to the router.

How do I change the wireless settings on my Range Extender?

1. Open a web browser (e.g., Internet Explorer, Firefox, Chrome, or Safari) and go to

http://dlinkap.local./

2. At the login screen, enter your Admin Password (If WPS Setup was used, password

is blank by default - just leave blank) and click Log in.

3. Go to Settings > Extender.

4. Enter a new Wi-Fi Network Name (SSID) and modify the security (Wi-Fi password)

settings as needed.

5. Click Save.

Note: If you have changed the Wi-Fi Network name or Wi-Fi Password, the device you are currently

using to connect to your Range Extender will drop. You will need to go to your Wi-Fi Settings and

connect to your Range Extender using the new network name and password.

DAP-1820 Install Guide 9

Where should I place my Range Extender for best performance?

A Range Extender only works as well as the signal it is extending.

Therefore, proper placement of your Range Extender is important

in achieving desired results.

For best performance, place your Range Extender in between

your router and your dead zone, making sure it is placed in a

location where theWi-Fi signal is still strong. Use the Smart Signal

Indicator to help nd a location with a strong signal. The more

bars lit on the signal indicator, the stronger the Wi-Fi signal is.

Poor

location

Ideal

location

Poor

location

Ideal

location

10 DAP-1820 Install Guide

What if I forgot my Range Extender’s Admin password or

want to reset my Range Extender?

1. If you forgot your Admin password or want to reset your

Range Extender back to the factory default settings, press

and hold the reset button on the bottom of the extender

using a paper clip and release after a minimum of 10

seconds. The Status light will turn red.

Note: This process will erase all your settings.

2. Setup your Range Extender using your preferred method.

What if WPS setup is not working?

WPS may be disabled on some Routers or Modems. If the

WPS Status LED on your Router or Modem does not start

blinking when you have pressed theWPS button, try again

and hold it a little longer. If it still does not blink, STOP, and

congure your Range Extender using Method Two:

D-Link WiFi Setup, on page 6.

Reset

Button

What is Mesh Smart Roaming?

With Mesh Smart Roaming, your Wi-Fi device (e.g. SmartPhone, Tablet) will

automatically roam to the strongest Wi-Fi signal, eliminating the need to switch

between your Router’s and Range Extender’s Wi-Fi signal as you move around your

home.

Mesh Smart Roaming Requirements:

1. The Wi-Fi device (e.g. SmartPhone, Tablet) must support the 802.11k/v standard.

2. The Wireless Name (SSID) & Wireless Password must be the same on both

the Mesh Wi-Fi Range Extender and your Wireless Router.

Why don’t I see a dierent network name (SSID) for each wireless band?

By default, SmartConnect is enabled on this Range Extender. SmartConnect will

automatically steer your device to the optimal wireless band (2.4GHz or 5GHz)

according to current network trac. When enabled, you will only see one wireless

network name (SSID) from your Range Extender.

Indice

Altri manuali D-Link Estensione

D-Link

D-Link DHP-701AV Manuale utente

D-Link

D-Link DIR-505 Manuale

D-Link

D-Link DHP-W311AV Manuale utente

D-Link

D-Link DAP-1320 Manuale utente

D-Link

D-Link DAP-1530 Manuale utente

D-Link

D-Link AirPlus G DWL-G710 Manuale utente

D-Link

D-Link DAP-1320 Manuale utente

D-Link

D-Link DAP-X1870 Manuale utente

D-Link

D-Link DAP-X1860 Manuale utente

D-Link

D-Link DAP-1860 Manuale utente

D-Link

D-Link DHP-W311AV Manuale utente

D-Link

D-Link AMPLIFI DAP-1525 Manuale utente

D-Link

D-Link DAP-1610 Manuale utente

D-Link

D-Link AirPlus G DWL-G710 Manuale utente

D-Link

D-Link DSM-750 - MediaLounge High-Definition Draft N Media... Manuale utente

D-Link

D-Link DAP-1620 Manuale utente

D-Link

D-Link DWL-G800AP Manuale utente

D-Link

D-Link DAP-1320 Manuale

D-Link

D-Link DAP-1950 Manuale utente

D-Link

D-Link DRA-2060 Manuale

D-Link

D-Link DAP-1520 Manuale utente

D-Link

D-Link DAP-1320 Guida di riferimento

D-Link

D-Link DHP-W312AV Manuale utente

D-Link

D-Link DHP-W310AV Manuale utente

Manuali Estensione popolari di altre marche

SY HDBT-60T Manuale utente

Appsys ProAudio

Appsys ProAudio ADX-16 Manuale utente

Atlona

Atlona RS232 Manuale utente

IDK

IDK OPF-TH1000-A Manuale utente

Enable-IT

Enable-IT 824WP Manuale utente

Worx

Worx Landroid RadioLink WA0864 Scheda tecnica

TP-Link

TP-Link TL-WA730RE Manuale utente

Camplex

Camplex CMX-HDMI-SFPL Manuale utente

SC&T

SC&T HE03-4K Manuale utente

Marmitek

Marmitek MegaView70 Manuale utente

Samsung

Samsung SCS-26UC4 Manuale utente

Foxun

Foxun SX-GES24 Manuale utente

MuxLab

MuxLab 500771 Manuale utente

foxunhd

foxunhd SX-AEX01 Manuale utente

TERK Technologies

TERK Technologies LFIRX2 Manuale utente

Devolo

Devolo Audio Extender Manuale

Edimax

Edimax EW-7438RPn V2 Manuale utente

Shinybow USA

Shinybow USA SB-6335T5 Manuale utente