D-Link NetDefend DFL-800 Manuale utente

Configuration examples for the D-Link

NetDefend Firewall series

Scenario: How to configure Transparent Mode in DHCP Network

Environment

Platform Compatibility: All NetDefend Firewall Series

Last update: 2008-03-07

Overview

In this document, the notation Objects->Address book means that in the tree on the left

side of the screen Objects first should be clicked (expanded) and then Address Book.

Most of the examples in this document are adapted for the DFL-800. The same settings can

easily be used for all other models in the series. The only difference is the names of the

interfaces. Since the DFL-1600 and DFL-2500 has more than one lan interface, the lan

interfaces are named lan1, lan2 and lan3 not just lan.

The screenshots in this document is from firmware version 2.11.02. If you are using an

earlier version of the firmware, the screenshots may not be identical to what you see on

your browser.

To prevent existing settings to interfere with the settings in these guides, reset the

firewall to factory defaults before starting.

How to configure Transparent Mode in DHCP network environment

This scenario shows how a firewall in Transparent Mode can be placed into an existing

DHCP network between an Internet access router and LAN, without the need to

reconfigure clients in LAN.

The WAN and LAN interfaces of the firewall will be configured to operate in Transparent

Mode. It is preferred to configure IP addresses on the WAN and LAN interfaces, as this can

improve performance during automatic discovering of hosts.

1. Interfaces.

Go to Objects ->Address book -> InterfaceAddresses:

Edit the following items:

Change lan_ip to 192.168.1.1

Change lannet to 192.168.1.0/24

Change wan1_ip to 192.168.1.101

Change wan1net to 192.168.1.0/24

Add a new IP4 Host/Network object:

Name: gw-world

IP Address: 192.168.1.254

Click OK.

Go to Interfaces -> Ethernet:

Make sure the lan interface has the following settings:

IP Address: lan_ip

Network: lannet

Default Gateway: (None)

Select Enable Transparent Mode checkbox

Click OK.

The settings for the wan1 interface should be:

IP Address: wan1_ip

Network: wan1net

Default Gateway: gw-world

Select Enable Transparent Mode checkbox

Click OK.

Save and activate the configuration.

2. How to configure DHCP relay in transparent mode

Many companies are in DHCP network environment, here will introduce how to configure

your firewall which can allow your DHCP server or ISP DHCP server to offers IP address for

network clients in transparent mode.

Go to Objects ->Address book -> InterfaceAddresses:

Add DHCP server address object

For example:

Name: DHCP_server

IP address: 192.168.1.250

Click OK.

Go to System ->DHCP ->DHCP Relays:

Add DCHP relay:

Name: DHCP

Action:Relay

Source Interface: lan

DHCP Server to relay to: DHCP_server

Allowed IP offers from server: all-nets

Click OK.

Save and Activate

Altri manuali per NetDefend DFL-800

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali D-Link Firewall

D-Link

D-Link DFL-800 - Security Appliance Manuale utente

D-Link

D-Link NetDefend SOHO DFL-160 Manuale utente

D-Link

D-Link DFL-1100 - Security Appliance Manuale utente

D-Link

D-Link NetDefend DFL-800 Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

D-Link

D-Link NetDefend DFL-CP310 Manuale di istruzioni

D-Link

D-Link DFL-1000 Manuale utente

D-Link

D-Link NetDefend DFL-1660 Manuale utente

D-Link

D-Link NetDefend SOHO DFL-160 Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

D-Link

D-Link NetDefend DFL-860 Manuale utente

D-Link

D-Link NetDefend Firewall Series Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

D-Link

D-Link DFL-1660-WCF-12 Manuale utente

D-Link

D-Link DFL-300 - Security Appliance Manuale utente

D-Link

D-Link DFL-1600 - Security Appliance Manuale utente

D-Link

D-Link NetDefend DFL-800 Manuale utente

D-Link

D-Link DFL-1600 - Security Appliance Manuale utente

D-Link

D-Link DFL-210-IPS-12 Manuale utente

D-Link

D-Link DFL-200 - Security Appliance Manuale utente

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuale utente

D-Link

D-Link DIR-330 - Wireless G VPN Router Manuale utente

D-Link

D-Link NetDefend DFL-260E Manuale utente

Manuali Firewall popolari di altre marche

Cisco

Cisco S190 Manuale utente

Fortinet

Fortinet FortiGate Voice Series Manuale utente

ADTRAN

ADTRAN NetVanta 2300 Manuale utente

SecureLogix

SecureLogix ETM System Manuale utente

NETGEAR

NETGEAR ProSafe FVX538 Manuale utente

Lanner

Lanner FW-8877 Manuale utente

Huawei

Huawei USG6000 Series Manuale di installazione e funzionamento

H3C

H3C SecPath F5000-AI-15 Manuale utente

Nexcom

Nexcom DNA 1150 Manuale utente

Fortinet

Fortinet FortiGate-60 series Manuale utente

Cisco

Cisco 3110 Manuale

Draytek

Draytek Vigor2860 Series Manuale utente

Lanner electronics

Lanner electronics FW-7650 Series Manuale utente

Swisscom

Swisscom Internet Backup Manuale utente

SonicWALL

SonicWALL NSa 5700 Manuale utente

DPtech

DPtech FW1000 SERIES Manuale utente

FEITIAN

FEITIAN MultiPass FIDO Manuale utente

EBLOCKER

EBLOCKER PRO Manuale utente