D-Link DSL-502T Manuale utente
1
Before You Begin
Make sure you have all the necessaryinformation and equipment on hand before beginning
the installation.
CheckYourPackageContents
This product
can beset
up using any currentweb
browser, i.e.,Internet
Explorer 6or Netscape
Navigator 6.2.3.
DSL-502T
ADSLRouter
2004 D-Link Systems, Inc. All rights reserved. Trademarksor registered trademarksare the propertyof their respective holders. Software and
specificationssubject to change without notice.
DSL-502T ADSL Router
CD-ROM(containingManual and USB Driver)
Ethernet (CAT5 UTP) Cable
Telephone Cable
Power Adapter
USB Cable
Ifanyoftheabove items are missing, please contact your reseller
Using a power supply
with a different voltage
rating will damage and void
the warrantyfor this product.
2
Connecting the Routerto YourComputer
Please read the User s Manual for instructions on how to use
the USB port.
A. First, connect the power adapter to the receptor at the back panel ofthe
DSL-502Tand then plug the other end of the power adapter to a wall outlet or
power strip. The Power LED will turn ON to indicate proper operation.
B. Insert one end of the cable into the Ethernet port on the back panelofthe
DSL-502Tand the other end ofthe cable to an Ethernet Adapter or available
Ethernet port on your computer.
ADSL port -
connect to
ADSL line
USB port,
con
nect USB
cable here
and install
Ethernet port -
connect to
Ethernet cable
Factory
Reset
button
Power input -
connect to power
adapter
3
Configuring the Router
To use your Web browser to access the web pages used to setup the Router, your computer
must be configured to Obtain an IPaddress automatically”, that is, you must change the
IPnetwork settings ofyour computer so that it is a DHCPClient. Ifyou are using Windows
XP and do not knowhowto change your network settings, skip ahead to Appendix A and
read the instructionsprovided. You mayalso read the User Manual for instructionson
changing IPsettings for computers running Windows operating systems.
Open your Web browser and type
http://192.168.1.1”into the URLaddress
box.Then pressthe Enter or Return key.
The Login pageappears.
Type admin”for the
Login Name and
admin”in the
Password field.
Click Login
4
Configuring the Router(continued)
Once you havelogged in, the Home screen will appear.Click the Setup tab to go to the Setup
menu and configure the Router.
Click Setup
5
Configuring the Router(continued)
In the Setup menu, click the Connection 1 button to go to the configuration menu for the
Internet connection.
Click Connection 1
6
Configuring the Router(continued)
In the Connection 1 menu, type the Username and Password used to verifythe identityof
your ISPaccount. It maybe necessaryto change the PPPencapsulation Type used for your
connection. You mayalso need to change the VPI or VCI value. YourISPwill give these
settings to you if theyneed to be changed. Click the Apply button when you have entered all
the information. Tosavethe changes made to Connection 1, click the Tools tab and follow the
instructions on the next page.
A. Type the Username
and Password used for
your account.
D. Click Tools when
you have applied the
newsettings.
C. Click the Apply button
after you have entered the
account information.
B. Check the PPP
encapsulation Type,
VPI: and VCI: - ifthese
values are not correct,
change these according
to the instructions of
your ISP.
7
Configuring the Router(continued)
Nowsave the changesyou have just made. The Save function is accessed from the System
Commands menu. Click the System Commands button to viewthat menu.
Click System Commands to
viewthe menu used to save
changes.
8
Configuring the Router(continued)
To save the newsettings, click the SaveAll button in the System Commands menu. Aftera
fewseconds, the changes will be saved. The Router will automaticallyestablish the Internet
connection after a fewmore seconds.
Wait a fewseconds forthe Internet connection to be established and proceed to access the
Internet via your web browser.
Click SaveAll to save
the newsettings.
9
Appendix
For additional settings or information, refer to the Advanced, Tools, or Status tabs on the
web-management interface; or to the manual located on the CD-ROM.
Configuring IPSettings in Windows XP
Use the following steps to configure a computer running Windows XPto be a DHCPclient.
1. From the Start menu on your desktop, go to Settings, then click on Network
Connections.
2. In the Network Connections window, right-click on LAN (Local Area Connection),
then click Properties.
Right-click on the Local Area
Connection icon and Select the
Properties option from the pull-
down
menu.
10
3. In the General tab of the Local Area Connection Properties menu, highlight Internet
Protocol (TCP/IP) under “This connection uses the following items:”byclicking on it
once. Click on the Properties button.
4. Select “Obtain an IPaddress automatically”byclicking once in the circle. Click the
OK button.
Your computer is nowreadyto use the Router s DHCPserver.
Click Properties
Select Obtain an IPaddress
automatically in the Internet
Protocol (TCP/IP) Properties window
Altri manuali per DSL-502T
5
Indice
Lingue:
Altri manuali D-Link Router di rete
D-Link
D-Link DIR-842 Manuale utente
D-Link
D-Link DI-704GU Manuale utente
D-Link
D-Link Amplifi DHP-1565 Manuale utente
D-Link
D-Link DIR-457U Manuale utente
D-Link
D-Link DHP-600AV Manuale utente
D-Link
D-Link DVG-5402SP Manuale utente
D-Link
D-Link DI-804HV - Express ENwork Router Manuale utente
D-Link
D-Link xtreme n duo dap-1522 Manuale utente
D-Link
D-Link DI-1750 Manuale utente
D-Link
D-Link DES-1008D Manuale utente
D-Link
D-Link DIR-827 Manuale utente
D-Link
D-Link DWR-910 Manuale utente
D-Link
D-Link DIR-615 - Wireless N Router Manuale utente
D-Link
D-Link DWR-953 Manuale utente
D-Link
D-Link DIR-300NRU Manuale utente
D-Link
D-Link DIR-821 Manuale utente
D-Link
D-Link DIS-300G Series Manuale utente
D-Link
D-Link AirPlus DWL-810+ Manuale utente
D-Link
D-Link dgs-8000 SERIES Manuale
D-Link
D-Link DIR-1260 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza