D-Link DSL-G604T Manuale utente
©2007 D-Link Australia Pty Ltd. All rights reserved. Trademarks or registered trademarks are the property of their
respective holders. Software and specifications subject to change without notice.
DSL-G604T ADSL Modem Router.
Before You Begin
1. If you purchased this Router to share your high-speed Internet connection with other
computers, you must have an established Internet account from an Internet Service Provider
(ISP).
2. It is best to use the same computer that is connected to your ISP for configuring the DSL-
G604T ADSL Modem Router. The DSL-G604T acts as a DHCP server and will assign all the
necessary IP address information on your network. See the Appendix for setting each
network adapter to automatically obtain an IP address.
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
This product can be setup using
any current web browser, i.e.,
InternetExplorer6orNetscape
Navigator 6.2.3.
Using a power adapter with
a different voltage rating will
damage and void the
warranty for this product.
DSL-G604T Generation II
Wireless ADSL2+ Modem Route
r
CD-ROM with Click’n Connect Utility and
Product Documentation
Wireless Antenna
Telephone Cable (RJ-11)
CAT 5 UTP Ethernet Cable (RJ-45)
12V 1.25A
Power Adapter
DSL-G604T
A
DSL Modem Route
r
2
Connecting the Router to your
Computer
1. First, connect the power adapter to the power input at the back
panel of the DSL-G604T and then plug the other end of the
power adapter to a wall outlet or power strip. On the front of
the device, the Power LED will turn ON to indicate proper
operation.
2. Insert one end of the Ethernet cable into an Ethernet port on
the back panel of the DSL-G604T and the other end of the
cable to an Ethernet Adapter or available Ethernet port on your
computer.
3. Insert the telephone cable included with the Router into the
ADSL port, and then connect the cable to your telephone line.
(Line must be activated for ADSL use)
4. Check the LED display on the front of the Router to confirm
that the connections have been made. (This will be shown with
solid lights for the corresponding port)
ADSL Port
Connect to
your ADSL
p
hone line
Antenna
Post
Connect
antenna here
Ethernet Ports
Connect to
Ethernet cable
Power Input
Connect to
p
ower ada
p
ter
3
Configuring the Router via the
D-Link Click’n Connect Utility
Insert the CD-ROM into your PCs CD Drive. The Click’n Connect utility should
appear automatically. If it does not appear, explore your CD-ROM drive within
Windows, and double-click on the file “dslutility.exe” to start the utility
manually.
You can select one of five options:
1. User Manual: This option will open up the DSL-G604T user manual.
You will need Adobe Acrobat Reader installed to view the manual.
2. Quick Install Guide: This option will show you a software-based version
of this Quick Install Guide
3. Install Acrobat Reader: Selecting this option will install Adobe Acrobat
Reader onto your PC.
4. Technical Support: Selecting this option will link you to D-Link
Australia/New Zealand Technical Support online.
5. Start Installation: This will commence the installation of the DSL-
G604T.
4
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 1 - Power Up the Device
Connect the Power Adapter from the wall socket to the DSL-G604T. Wait for the
Status LED to blink before proceeding onto the next step.
Follow the on-
screen
instructions,
then Click
Next to
continue
5
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 2 – Connect the Device to your Computer
Connect the Ethernet cable from the computer to one of the LAN ports
(numbered 1 to 4) on the DSL-G604T now. Wait for the LAN Link LED for the
corresponding LAN port number to flash, then click on Next to continue to Step
3.
Follow the on-
screen
instructions,
then Click
Next to
continue
6
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 3 – Connect the Device to the ADSL Line
Connect your ADSL telephone line from the wall socket to the DSL-G604T
ADSL socket. Please note that if you are using an ADSL Splitter/Filter, you will
need to connect the telephone line from the DSL socket on the filter to the DSL-
G604T ADSL socket.
Once you have completed this, wait for the ADSL LED to light up, and click on
Next to continue to Step 4.
Follow the on-
screen
instructions,
then Click
Next to
continue
7
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 4 – Checking Device Connectivity
The Click’n Connect utility will now check the DSL-G604T to make sure it has
been connected correctly. Once it has successfully detected your modem, it will
proceed to the next step automatically.
At this point, you may want to prepare your ADSL account information that is
provided to you by your Internet Service Provider (ISP) as you will require it
shortly.
8
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 5 – ISP Configuration
You will now be prompted to select your Country as well as your Internet
Service Provider (ISP). If your ISP is not listed for your country, select Other
and enter the details that are relevant to your ISP.
Once you have completed this step, click on Next to continue onto Step 6.
Click Next to
continue
Select your
ISP
Select your
Country
9
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 6 – Account Configuration
At this step, you will be required to enter your ADSL account Username, as
provided by your ISP. You will also be required to enter your ADSL account
Password, then reenter the password in the Confirm Password box.
Please note, different ISP’s use different Usernames. Some use the first part of
your email address while some ISP’s use part or all of your email address. If
you are unsure as to which one your ISP uses, please confirm this with your
ISP.
Once you have completed this step, click on Next to continue onto Step 7.
Enter your ISP Username
Enter your ISP Password
Re-Enter
y
our ISP Password
Click Next to
continue
10
Configuring the Router via the
D-Link Click’n Connect Utility
The Click’n Connect utility will guide you through the installation process step-
by-step. Follow the on-screen instructions, then proceed to the next step.
Step 7 – Set Wireless Connection
You will now be asked if you would like to enable your Wireless Radio. The
wireless radio is what the router uses to provide wireless networking
functionality to your wireless computers. If you would like to turn the radio on,
select Enabled to turn it on, otherwise select Disabled to turn the radio off.
You can turn the radio on or off at a later date by referring to your User Manual.
Once you have completed this step, click Next to continue. If you Enabled
your wireless radio, proceed to step 7A on Page 10. If you Disabled your
wireless radio, proceed to Step 8 on Page 11.
Select your
Wireless Radio
Preference
Click Next to
continue
Altri manuali per DSL-G604T
17
Indice
Altri manuali D-Link Router di rete
D-Link
D-Link DI-804 Manuale utente
D-Link
D-Link DIR-1260 Manuale utente
D-Link
D-Link DVG-N5402SP Manuale utente
D-Link
D-Link DIR-868L Manuale utente
D-Link
D-Link DIR-809 Manuale utente
D-Link
D-Link DRO-210i Manuale utente
D-Link
D-Link DES-3010F Manuale utente
D-Link
D-Link DIS-100G-5W Manuale utente
D-Link
D-Link DIR-506L Manuale utente
D-Link
D-Link DES-1048G Manuale utente
D-Link
D-Link DSR-250 Manuale utente
D-Link
D-Link DES-3550 Manuale utente
D-Link
D-Link 2Voice + 4SW VoIP Router DVG-1402S Manuale utente
D-Link
D-Link DI-LB604 - Load Balancing Router Manuale utente
D-Link
D-Link Amplifi DIR-657 Manuale utente
D-Link
D-Link Express EtherNetwork DI-604 Manuale utente
D-Link
D-Link des-1016a Manuale utente
D-Link
D-Link xStack DES-3200 Series Manuale utente
D-Link
D-Link DIR-878 Manuale utente
D-Link
D-Link DGL-4500 - GamerLounge Xtreme N Gaming Router... Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza