D-Link Express Ethernetwork DI-704P Manuale utente
1
This product can be set up using
any current web browser, i.e.,
Internet Explorer or Netscape
Navigator.
DI-704P
Ethernet Broadband
Router and Print Server
5V DC Power Adapter
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
specifications subject to change without notice. DI-704P.11222002
Before You Begin
1. If you purchased this router to share your high-speed Internet connection with other
computers, you must have either an Ethernet-based Cable or DSL modem with an
established Internet account from an Internet Service Provider (ISP).
2. It’s best to use the same computer that is connected to your modem for configuring
the DI-704P Broadband Router. The DI-704P acts as a DHCP server and will assign
all the necessary IP address information on your network. See Appendix at the
end of this Quick Installation Guide or the Manual on the CD-ROM for setting
each network adapter to automatically obtain an IP address.
Check Your Package Contents
DI-704P Ethernet Broadband Router
CD-ROM (containing Manual, Warranty and
Print Server Software for Windows)
Ethernet (CAT5 UTP/Straight Through) Cable
Using a power supply
with a different voltage
rating will damage and void
the warranty of this product.
If any of the above items are missing, please contact your reseller.
2
Connecting The DI-704P Broadband
Router To Your Network
A. First, connect the power adapter to the receptor at the back panel of
the DI-704P and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper
operation.
B. Insert one end of an Ethernet cable to the WAN port on the back panel
of the DI-704P and the other end to the Ethernet port located on your
Cable or DSL modem. The WAN LED light will illuminate to indicate
proper connection.
C. Insert an Ethernet cable to LAN port 1 on the back panel of the
DI-704P and an available Ethernet port on the network adapter in the
computer you will use to configure the DI-704P. The LED light for LAN
Port 1 will illuminate to indicate proper connection. (Note: The LAN
Ports on the DI-704P are Auto-MDI/MDIX. Meaning you can use a
straight-through or crossover Ethernet (CAT5) cable to the LAN Ports.
D. The parallel port on the DI-704P is used to connect printers only.
Connect one end of the printer cable to your printer and the other end
to the DI-704P.
A. Receptor for
Power Adapter.
B. WAN Port
This is for the connection
of an Ethernet cable to
the Cable or DSL modem
C. LAN Ports These
are the connections
for Ethernet cables
to Ethernet enabled
computers.
Reset Button
Pressing this button restores
the Router to its original factory
default settings.
D. Printer Port
You can connect a
Printer to the
Parallel Port here.
3
Restart Your Computer
Connecting Additional Computers To
The DI-704P
Using additional Ethernet (CAT5 UTP) cables, connect your
Ethernet-equipped computers to the remaining Ethernet LAN ports
on the back panel of the DI-704P
WAN LED – a
solid light indicates
connection on the
WAN port. This
LED blinks during
data transmission.
LOCAL NETWORK
LEDs – a solid light
on the port indicates a
connection to an
Ethernet enabled
computer on ports 1-4.
This LED blinks during
data transmission.
POWER LED – a solid
light indicates a proper
connection to the
power supply.
M1 LED – will flash
consistently to indicate
that the DI-704P is
working properly.
M2 LED – a solid light indicates
that Internet connection has
been established.
4
When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:
Using The Setup Wizard
The logon pop-up screen will appear.
Open your Web browser and
type “http://192.168.0.1” into the
URL address box. Then press the
Enter or Return key.
Type “admin” for the username and
leave the password field blank.
Click OK
5
The Setup Wizard (continued)
Once you have logged in, the
Home screen will appear.
You will see the following screens
Set up your new password.
You have the option to
establish a password.
Click Run Wiz-
ard
Click Next
Click Next
6
The Setup Wizard (continued)
Select your Internet
Connection. You will be
prompted to select the
type of Internet connection
for your router.
If you are unsure of which setting to select,
please contact your Internet Service Provider.
Select Others only if you use PPTP in
Europe or Big Pond Cable in Australia.
If you selected Dynamic IP
Address, this screen will
appear: (Used mainly for
Cable Internet service.)
What is a MAC address? Each
network adapter has a discrete
Media Access Control (MAC)
address. Note that some computers
and peripherals may already
include built-in network adapters.
Click the “Clone MAC Address”
button to automatically copy the
MAC address of the network
adapter in your computer. You can
also manually type in the MAC
address.
Click Next
Click Next
7
The Setup Wizard (continued)
If your ISP requires a Static
IP Address, and this option
is selected, then this
screen will appear:
If your ISP uses PPPoE
(Point-to-Point Protocol over
Ethernet), and this option is
selected, then this screen will
appear: (Used mainly for DSL
Internet service.)
Enter the IP address informa-
tion originally provided to you
by your ISP. You will need to
complete all the required
fields.
Please be sure to remove any
existing PPPoE client software
installed on your computers.
Enter in the username and
password provided to you by
your ISP.
Click Next
Click Next
8
Your Setup is Complete!
Click Restart
Test Internet Connection.
You will be returned to the Home tab.
For additional settings
or information, refer to
the Advanced, Tools,
or Status tabs on the
web-management
interface; or to the
Manual located on the
CD.
Then relaunch your
Web browser (i.e.,
Internet Explorer or
Netscape Navigator),
to link to your favorite
Web site to test your
Internet connection.
Click to Exit
9
APPENDIX
Insert the installation CD-ROM into the
CD-ROM drive. The following window
will be shown automatically. If it is not,
please run “autorun.exe” on the CD-
ROM.
Installing the Print Server Software
Wait until the following Welcome
dialog appears.
Select the destination folder.
Click Next
Click Install Windows
Printer Software
Click Next
Select your Windows
operating system
10
After rebooting your computer, the software installation procedure is finished.
Installing the Print Server Software (continued)
Configuring on Windows 98se/Me Platforms
After you finish the software installation
procedure, your computer will be capable
of network printing provided by the
DI-704P. For convenience, we call the
printer connected to the printer port of the
DI-704P a printer server. On a Windows
95/98 platform, open the Printers window
in the My Computer menu.
Click OK
Now, you can configure the print server of
the DI-704P:
Find out the corresponding icon of your
printer server, for example, the HP
LaserJet 6L. Right click on that icon,
and then select Properties.
The following screen appears:
Then, the setup program will begin
to install the programs into the
destination folder.
When the following window is
displayed.
Click Finish
Altri manuali per Express Ethernetwork DI-704P
8
Indice
Altri manuali D-Link Router di rete
D-Link
D-Link DSR-150 Manuale utente
D-Link
D-Link DES-1005P Manuale utente
D-Link
D-Link DSL-321B Manuale utente
D-Link
D-Link DWR-920 Manuale utente
D-Link
D-Link myPocket DIR-457 Manuale utente
D-Link
D-Link DES-2108 Manuale utente
D-Link
D-Link DWR-961 Manuale utente
D-Link
D-Link AirPlus DWL-810 Manuale utente
D-Link
D-Link DWR-921E Manuale utente
D-Link
D-Link PowerLine DHP-P601AV Manuale utente
D-Link
D-Link DI-704 Manuale utente
D-Link
D-Link DWR-921 Manuale utente
D-Link
D-Link DHP-W311AV Manuale utente
D-Link
D-Link DSL-6740U Manuale utente
D-Link
D-Link DAS-3626 Manuale utente
D-Link
D-Link DIR-860L Manuale utente
D-Link
D-Link xStack DES-3200 Series Manuale utente
D-Link
D-Link DSL-514 Manuale utente
D-Link
D-Link DIR-860L Manuale utente
D-Link
D-Link DIR-620 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza