D-Link WRM921 Manuale utente
4G LTE ROUTER
DWR-M921
QUICK
INSTALLATION
GUIDE
DWR-M921
2
ENGLISH
CONTENTS OF
PACKAGING
CONTENTS
4G LTE ROUTER
DWR-M921
12V 1A POWER ADAPTER
ETHERNET CABLE (CAT5 UTP)
CONNECT THE ROUTER TO YOUR PC DURING SETUP
If any of these items are missing from your packaging
contact your reseller
DWR-M921 3
ENGLISH
PRODUCT
SETUP
HARDWARE SETUP
Ensure that your DWR-M921 Mobile Router is powered off before performing the steps below.
1. Flip the router around and open the lid at the bottom of the router.
2. Gently press down and slide the silver SIM card holder to the right (OPEN ) & open the flap.
3. Insert a standard USIM card into the SIM card holder with the gold contacts facing downward.
4. Close the flap and slide the SIM card holder back to the left ( LOCK) to lock it. Close the lid.
5. Insert the Ethernet cable into the LAN Port 1 on the back panel of the DWR-M921 Mobile Router,
and the other end into an Ethernet port on a computer to configure the unit.
Note:
crossover Ethernet cables can be used.
Log in using the username and password below.
IP ADDRESS: http://192.168.0.1 USERNAME: admin
adminPASSWORD:
Note:
The DWR-M921 Mobile Router LAN Ports are “Auto-MDI/MDIX.” Therefore, patch or
The 4G connection can also be used as a backup WAN. Once a backup is configured.
ADVANCED SETUP (ACCESS VIA IP ADDRESS)
Open a browser window and enter the below IP address into the browser address field.
6. Connect the power adapter to the socket on the back panel of your DWR-M921 Mobile Router and
plug the other end of the power adapter into a wall outlet or power strip.
a. Turn ON the router. The Power LED will light up to indicate that power is being supplied to the router.
c. The initialization process takes about 45 seconds to a minute.
b. After a few moments, if a connection has been established, the following LEDs will turn
solid blue: Power, LAN 1-4 (depending on which port your Ethernet cable has been
connected to), Wi-Fi, LTE and WAN (if connection is used).
DWR-M921
4
ENGLISH
TROUBLESHOOTING
1. HOW DO I CONFIGURE MY DWR-M921 ROUTER OR CHECK MY WIRELESS NETWORK
NAME (SSID) AND WIRELESS PASSWORD (WPA KEY)?
- Connect your PC to the router using an Ethernet cable.
- Open a web browser and enter the router's IP address: http://192.168.0.1
- Log into the router using the default username admin, the default password is admin.
Note: If you have changed the password and cannot remember it, you will need to reset the
router to factory defaults.
2. HOW DO I RESET MY DWR-M921 ROUTER TO FACTORY DEFAULT SETTINGS?
- Ensure the router is powered on. If you cannot remember your router administrator password,
you may press and hold the reset button on the side of the router for about 10 seconds.
Note:
in question 1 and reconfigure your router through the GUI.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WIRELESS NETWORK NAME (SSID) OR WIRELESS PASSWORD (WPA KEY)?
- Every PC that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless Network Name (SSID) and Wireless Password (WPA key).
- Use the web based user interface (as described in question 1 above) to check or choose
your wireless settings.
- Make sure you write down these settings so that you can enter them into each wirelessly
4. WHY AM I UNABLE TO ESTABLISH AN INTERNET CONNECTION?
- If connecting using a 4G mobile connection, make sure that you are within the network coverage
- If connecting using the WAN via ADSL/Fibre service, make sure the modem has been enabled/
SETUP AND CONFIGURATION PROBLEMS
- Once logged in, you can configure your router through the GUI.
Resetting the router to factory default will erase the current configuration. Log in as outlined
connected PC.
of your SIM card provider, and that the service has been correctly configured.
connected and is operational, and that the service is correctly configured.
ENGLISH
Tech Support for customers in
D-Link Middle East - Dubai, U.A.E.
Technical Support: +971-4-8809033
Egypt
Technical Support Call Center: +20 2258 66777
Kingdom of Saudi Arabia
Technical Support:
+966 1121 70009
South Africa
Technical Support:
+27-08600-35465, 012 741 2000
Pakistan
Technical Support: +92-21-34548310, 34305069
Morocco
Phone office: +212 700 13 14 15
Email: [email protected]
Bahrain
Technical Support: +973 1 3332904
Kuwait
Email: [email protected]
TECHNICAL SUPPORT
5
DWR-M921
ENGLISH
6
FCC WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference unless
the modifications are expressly approved in the instruction manual. The user could
lose the authority to operate this equipment if an unauthorized change or
modifications is made.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with RF radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with a
minimum distance of 30 centimeters between the radiator and your body
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
•The rating information is located at the bottom of the unit.
DWR-M921
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali D-Link Router di rete
D-Link
D-Link DSL-2650U Manuale utente
D-Link
D-Link RANGEBOOSTER N 650 Manuale utente
D-Link
D-Link DI-308 Manuale utente
D-Link
D-Link DSL-3580L Series Manuale utente
D-Link
D-Link DSL-2740U Manuale utente
D-Link
D-Link DWP-1010KT Manuale utente
D-Link
D-Link GO-SW-5E Manuale utente
D-Link
D-Link DSR-500 Manuale utente
D-Link
D-Link DSL-504 Manuale utente
D-Link
D-Link DIR-300 - Wireless G Router Manuale utente
D-Link
D-Link Xtreme N DUO Manuale utente
D-Link
D-Link DSL-2641B - Wireless G Router Manuale utente
D-Link
D-Link DSL-G624T Manuale operativo
D-Link
D-Link DSL-2745 Manuale utente
D-Link
D-Link DVG-N5402G/ACF Manuale utente
D-Link
D-Link xStack DXS-3350SR Manuale di istruzioni
D-Link
D-Link DSL-2640U Manuale utente
D-Link
D-Link DIR-816 Manuale utente
D-Link
D-Link myPocket DIR-457 Manuale utente
D-Link
D-Link DIR-X3260 Manuale utente
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza