D-Link DCS-3220 - SECURICAM Network Camera Manuale utente
Check Your Package Contents
Thesearetheitemsincludedwithyourpurchase:
If any of the below items are missing, please contact your reseller.
BeforeYouBegin
Youmusthaveatleastthefollowing:
• Windows98/Me/2000/XP
• ACD-ROMdrive
• AnavailableEthernetconnection
DCS-3220
This product can be set up
using Internet Explorer 6.x
or above 2-WayAudio/Digital Zoom
Internet Camera
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DCS-3220.07292004
DCS-3220 2-Way Audio/Digital Zoom Internet Camera
12V AC Power Adapter
CAT5 Ethernet Cable
CD-ROM with Manual and Software
Camera Stand
Using a power supply
with a different voltage
rating will damage this
productandvoidthewarranty.
2
Hardware Installation
System Requirements
• InternetExplorer6.xorabove
• CPU:1.7GHzorabove
• MemorySize:128MB (256MBrecommended)
• VGAcardresolution:800x600orabove
Note: If using multiple cameras for viewing/recording, the minimum requirements
are a 2.4GHz or above CPU with 512MB memory and a 32MB video card.
Connect the Ethernet Cable
ConnectanEthernetcabletothenetworkcable connector
locatedonthe Internet Camera’sbackpanel and attachit
to the network.
IfyouconnectthiscameradirectlytoaPC,youwillneedacross-overEthernet
cable. If you plug the camera into a hub or router, you will be able to use the
cableincluded with yourcamera.
When you have a proper connection, the LED (Light Emitting Diode) on the front of the
camera will turn from red to green. The light may blink on and off and your computer may
show an intermittant loss of connectivity if you have it directly connected to the camera.
Thisis normal untilyou have configuredyourcamera.
Attach the External Power Supply
Attachtheexternal powersupplyto theDCpower input
connectorlocated on theInternet Camera’s backpanel
(labeled DC 12V) and connect it to anAC power outlet.
Powersourceis confirmed when the LED Power Indicator on the Internet
Cameraisilluminated.
3
Hardware Installation (continued)
Connect an Audio Cable
Connect your speakers to the audio output jack on the
backofthe InternetCamera.Fordetailsonconfiguringthe
sound settings, please see the manual on the CD-ROM.
4
Installing the Installation Wizard
InserttheDCS-3220 CDintothe
CD-ROMdrive.
Click on Install Software
Click on Installation Wizard
Click Next
5
Installing the Installation Wizard
(continued)
Click Next
Click Next
Click Finish
6
Configuring Your Camera with the
Installation Wizard
DoubleclickontheInstallation
Wizard that was created on
yourdesktop.
Thesoftwarewill search forcameras.
TheInstallationWizardwillappear
andshowtheMACaddressofthe
DCS-3220 and an IP Address
(whichmay or may not becorrect
dependingonwhatyouhaveyour
DCS-3220 connected to). If you
have a DHCP* server on your
network, there will be a valid IP
Addressdisplayedhere,indicated
by a “Yes” under the assigned
column.
*A DHCP server is a device that
supplies IP Addresses to its
clients that are on the same
network.
7
Once the camera appears,
selectthecamerabyplacing
a Checkmark in the box.
Configuring Your Camera with the
Installation Wizard (continued)
Click Search to refresh the
list of cameras if needed.
If the Installation Wizard does not display
any devices, lightly insert a paper clip into
the reset opening on the unit’s rear panel
until the light starts to cycle (a series of
blinks) twice, then let go.
8
Click the Setup button
Configuring Your Camera with the
Installation Wizard (continued)
Enter an administrative password
intheRoot password andConfirm
passwordfields.
For details on the Date/Time
Settings,pleaserefer totheUser
ManualontheCD-ROM.
Click the Next button
9
Configuring Your Camera with the
Installation Wizard (continued)
Uncheck the box labeled
ResetIP address at nextboot
If you need to modify the IP
settings,please refer tothe user
manualontheCD-ROM.
Click the Apply button
Click the Next button
10
Configuring Your Camera with the
Installation Wizard (continued)
Click the button labeled
Link to Selected Device(s)
Click the Done button
Afterthesettingshavebeensaved,
theDonebutton will appear.
Altri manuali per DCS-3220 - SECURICAM Network Camera
1
Indice
Altri manuali D-Link Telecamera di sicurezza
D-Link
D-Link DCS-7010L Manuale utente
D-Link
D-Link DCS-930L Manuale utente
D-Link
D-Link DCS-7513 Manuale utente
D-Link
D-Link DCS-7413 Manuale utente
D-Link
D-Link DCS-6915 Manuale utente
D-Link
D-Link DCS-3112 Manuale utente
D-Link
D-Link Securicam DCS-3415 Manuale utente
D-Link
D-Link DCS-3112 Manuale utente
D-Link
D-Link Air DCS-1000W Manuale utente
D-Link
D-Link DCS-4701E Manuale utente
D-Link
D-Link DCS-6815 Manuale utente
D-Link
D-Link DCS-6112 Manuale utente
D-Link
D-Link DCS-6517 Manuale utente
D-Link
D-Link DCS 6513 Manuale utente
D-Link
D-Link DCS-6500LH Manuale utente
D-Link
D-Link DCS-2630L Manuale utente
D-Link
D-Link DCS-4602EV Manuale utente
D-Link
D-Link DCS-6513/E Manuale utente
D-Link
D-Link DCS-3110 - SECURICAM Fixed Network Camera Manuale utente
D-Link
D-Link DCS-8000LH Manuale utente
