D-Link SECURICAM DCS-6511 Manuale utente
This document will guide you through the basic
installation process for your new D-Link Network
Camera.
DCS-6511
Quick Installation Guide
HD Day & Night Vandal-Proof Fixed Dome Network Camera
2D-Link DCS-6511 Quick Install Guide
System Requirements
Package Contents
Installation Steps
If any of the above items are missing, please contact your reseller.
This installation guide provides basic instructions for installing
the DCS-6511 Network Camera on your network. For additional
information about how to use the camera, please see the User’s
Manual which is available on the CD included in this package or from
the D-Link support website.
DCS-6511 Quick Install Guide
1. Verify the package contents against the list below.
2. Hardware Overview
3. SD Card Installation
4. Hardware Installation
5. Conguration with Wizard
6. Adjusting the lens 3-axis Mount
DCS-6511 Network Camera
Manual and Software on CD-ROM
Quick Install Guide
Power Adapter
AV & Power Cables
Security Wrench
CAT-5 Ethernet Cable
Extension Adapter
Cable Cover
Mounting Bracket and Screws
Rubber Plug
Safety Notice:
Installation and servicing should be done by certied technicians so as
to conform to all local codes and prevent voiding your warranty.
3 D-Link DCS-6511 Quick Install Guide
Hardware Overview
Hardware Overview
Power Connector
Connects to 12 V DC power
24 V Power Connector
Connects to 24 V AC power
Ethernet Jack
RJ-45 connector for Ethernet which can
also be used to power the camera using
Power over Ethernet (PoE)
Audio In
Connects to a microphone DI/DO Wiring, 12V DC output
I/O connectors for external devices
Install the SD Card
Push the SD card into the camera with the
gold contacts oriented towards the base
of the camera. To eject the SD card, push
the SD card into the slot.
SD Card Installation
Disassemble the Camera
Open the camera enclosure by loosening
the 4 screws. Lift the dome o the base of
the camera.
Audio Out
Connects to speakers
4D-Link DCS-6511 Quick Install Guide
Hardware Overview
Standard Mounting Instructions
Mounting Installation
Please see the User Manual for detailed instructions regarding installation
and mounting the camera using a mounting bracket.
Style 1 - Concealed Cable Installation
Height: 23 mm (0.9 inches)
Diameter: 183 mm (7.2 inches)
Weight: 400 g (0.9 lbs)
Figure 2.1
Figure 2.2
5 D-Link DCS-6511 Quick Install Guide
Hardware Installation
Style 2 - Exposed Cable Installation
Height: 23 mm (0.9 inches)
Diameter: 183 mm (7.2 inches)
Weight: 400 g (0.9 lbs)
Figure 2.3 Figure 2.4
Figure 2.5 Figure 2.6
6D-Link DCS-6511 Quick Install Guide
Hardware Installation
Pendant Mount (DCS-34-2)
Height: 201 mm (7.9 inches)
Diameter: 150 mm (5.9 inches)
Weight: 665 g (1.45 lbs)
Pendant
Bracket
Rubber
Seal
Figure 3.2
Figure 3.3
Figure 3.1
Bracket
Cap
Figure 3.4
Mounting Plate
7 D-Link DCS-6511 Quick Install Guide
Hardware Installation
Bent Mount (DCS-34-3)
Height: 253 mm (9.96 inches)
Diameter: 150 mm (5.9 inches)
Weight: 770 g (1.7 lbs)
Bracket Cap
Bent
Bracket
Figure 4.4
Dome
Camera
Bent
Bracket
Figure 4.3
Figure 4.1
Bracket
Cap
Mounting
Plate
Figure 4.2
8D-Link DCS-6511 Quick Install Guide
Software Installation
Connection with a PoE Hub
If you are using a PoE hub, connect the IP camera to the hub via an
Ethernet cable, which will provide the transmission of both power and
data over a single cable.
General Connection Using 24 V AC Power Wiring
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power
source such as your building's emergency power.
General Connection Using 12 V DC Power Adapter
1. Connect the network camera to a hub via an Ethernet cable.
2. Connect the supplied power cable from the camera to a power
outlet.
9 D-Link DCS-6511 Quick Install Guide
Conguration
Conguration with Wizard
Click Setup Wizard to begin the
installation.
Insert the DCS-6511 CD into your computer's CD-ROM drive to begin the
installation. If the Autorun function on your computer is disabled, or if
the D-Link Launcher fails to start automatically, click Start > Run. Type
D:\autorun.exe, where D: represents the drive letter of your CD-ROM
drive.
After clicking Setup Wizard, the
following window will open.
Click Next to continue.
Click Yes to accept the License
Agreement.
10D-Link DCS-6511 Quick Install Guide
Conguration
Click Finish to complete the
installation.
To start the installation process,
click Next.
Note: The installation may take
several minutes to nish.
Click on the D-Link Setup Wizard
SE icon that was created in your
Windows Start menu.
Start > D-Link > Setup Wizard SE
The Setup Wizard will appear and display
the MAC address and IP address of your
camera(s). If you have a DHCP server on
your network, a valid IP Address will be
displayed. If your network does not use a
DHCP server, the network camera's default
static IP 192.168.0.20 will be displayed.
Click the Wizard button to continue.
Altri manuali per SECURICAM DCS-6511
7
Indice
Altri manuali D-Link Telecamera di sicurezza
D-Link
D-Link DCS-7413 Manuale utente
D-Link
D-Link DCS-4712E Manuale utente
D-Link
D-Link DCS-7513 Manuale utente
D-Link
D-Link SECURICAM DCS-7110 Manuale utente
D-Link
D-Link DCS-6915 Manuale utente
D-Link
D-Link DCS-960L Manuale utente
D-Link
D-Link DCS-6115 Manuale utente
D-Link
D-Link DCS-3410 Manuale utente
D-Link
D-Link DCS-2136L Manuale utente
D-Link
D-Link DCS-6815 Manuale utente
D-Link
D-Link DCS-930L Manuale utente
D-Link
D-Link DCS-5222L Manuale utente
D-Link
D-Link DCS-2670L Manuale utente
D-Link
D-Link DCS-6314 Manuale utente
D-Link
D-Link DCS-7513 Manuale utente
D-Link
D-Link DCS-5010L Manuale utente
D-Link
D-Link DCS-7517 Manuale utente
D-Link
D-Link DCS-6616 Manuale utente
D-Link
D-Link DCS-5009L Manuale utente
D-Link
D-Link DCS-930L Manuale utente
