D-Link 515337 Manuale utente

Quick Installation Guide

DVG-N5402SP

VoIP Router

Check Your Package Contents

User Manual can be found at http://www.dlink.com.sg/support/

DVG-N5402SP

VoIP Router Ether (CAT5 UTP)

Cable 12VDC, 2A Power

Adapter

Using a power

adapter with a

different voltage rating

will damage this

product and void the

warranty.

Front Panel Power: A steady green

light indicates a proper

connection to a power

source. A red light

indicates the power-on

self test fails or the

device is malfunction.

Prov/Alm: A blinking

light indicates the VoIP

Router can not register

with SIP Server or can

not get the IP address.

A blinking light also

indicates the VoIP

Router is attempting to

connect with the

Provisioning server.

Once the service

connects, the LED will

turn off. The LED will

light solid red if the

self-test or boot-up

fails.

when the VoIP Router is connected to a VoIP service provider. The

LED will flash if not connected to a service provider.

WLAN: A steady light indicates a wireless connection. A blinking

light indicates that the VoIP Router is receiving or transmitting from

or to the wireless network.

WAN: When a connection is established the LED will light up solid.

The LED will blink to indicate the activity. If the LED does not light

Hardware Overview

up when a cable is connected, verify the cable connections and

ensure that your devices are powered on.

LAN: When a connection is established the LED will light up solid

on the appropriate port. The LEDs will blink to indicate the activity.

If the LED does not light up when a cable is connected, verify the

cable connections and ensure that your devices are powered on.

USB: When a connection is established the LED will light up solid.

The LED will blink to indicate the activity. If the LED does not light

up when a USB device is connected, verify the USB connection

and ensure that the devices are powered on.

Phone: This LED displays the VoIP status and hook or ringing

activity on the phone port that is used to connect your normal

telephone(s). If a phone connected to a phone port is off the hook

or in use, this LED will light solid. When a phone is ringing, the

indicator will blink.

Line: Light on means the line is in use (off-hook), and vice versa.

WPS: When a WPS negotiation is established the LED will light up

solid. The LED will blink to indicate the activity. If the LED does not

light up when the WPS negotiation is failed or is not established.

Rear Panel

1. Antenna: Connect to a wireless network.

2. Phone Port (1-2): Connect to your phones using standard phone

cabling (RJ-11).

3. USB: USB host 2.0 port, for connecting to another USB device to

supply some value-added application.

4. LAN: Connect to your Ethernet enabled computers using Ethernet

cabling.

5. WAN: Connect to your broadband modem using an Ethernet cable.

6. Power Receptor: Receptor for the provided power adapter.

Hardware Overview

(continued)

A. Insert one end of the Ethernet cable into the Ethernet (LAN) port on

the back panel of the DVG-N5402SP and the other end of the cable

to an Ethernet Adapter or available Ethernet port on your computer.

B. Insert one end of the Ethernet cable into the WAN port on the back of

the DVG-N5402SP and the specify port of the ONT or the LAN port

of your router.

C. Insert a telephone cable into the Phone port, and then connect the

cable to your telephone.

Installing the Hardware

D. Connect the power adapter to the power input at the back panel of

the DVG-N5402SP and then plug the other end of the power adapter

to a wall outlet or power strip. On the front of the device, the Power

LED will turn On to indicate proper operation.

E. Check the LED display on the front of the VoIP Wireless Router to

confirm that the connections have been made.

Installing the Hardware (continued)

After the installations are completed, your network should look similar to

the diagram below.

Hardware configuration is complete! If your VoIP service is already activated, you

can make phone calls now.

Installing the Hardware (continued)

ONT

Configuration

To access the web-based configuration utility, open a web browser such

as Internet Explorer and enter the IP address of the DVG-N5402SP.

Open your Web browser and

type http://192.168.0.1 into the

URL address box. Press the

Enter or Return Key.

Click Login to enter Web Site.

The default username and

password: admin/password

Configuration (continued)

The username of ADMIN and USE

have been defined and locked b

default. It is highly recommended to

create a login password to keep

your router secure.

Click Apply.

By Default, the wireless SSID will be

“DVG-N5402SP-XXXXXX”

And “XXXXXX” will be the last 6

digits of your MAC address located

below the device.

Configuration (continued)

Enter the SSID to name your own

wireless network. All devices must

have the same SSID to

communicate on the wireless

network. Select a wireless channel.

Select the 802.11 Mode of your

network which can work in different

speed of wireless connection.

Click Apply.

Select your wireless security modes:

None, WEP, WPA only, WPA2

only or WPA/WPA2 Mixed for your

wireless network.

Click Apply

By default, there are no wireless

securities but by changing to

WPA/WPA2 Mixed, the Pre-

Shared Key will be the serial

number of your router.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali D-Link Router wireless

D-Link

D-Link DIR-615 - Wireless N Router Manuale utente

D-Link

D-Link GO-DSL-N150 Manuale utente

D-Link

D-Link DIR-320NRU Manuale utente

D-Link

D-Link COVR-X1873 Manuale utente

D-Link

D-Link DSL-2740B Manuale utente

D-Link

D-Link DIR-506L Manuale utente

D-Link

D-Link DIR-810L Manuale utente

D-Link

D-Link DWR-932 Manuale utente

D-Link

D-Link DIR-869 Manuale utente

D-Link

D-Link DIR-602 Manuale utente

D-Link

D-Link DIR-842 Manuale utente

D-Link

D-Link DIR-816L Manuale utente

D-Link

D-Link DSL-2750E Manuale

D-Link

D-Link DIR-652 Manuale utente

D-Link

D-Link AirPro DI-754 Manuale utente

D-Link

D-Link DVG-N5402FF Manuale utente

D-Link

D-Link DSL-2730U Manuale utente

D-Link

D-Link DWR-932C Manuale utente

D-Link

D-Link DSL-2750U Manuale

D-Link

D-Link DAP-1350 Manuale utente

D-Link

D-Link AirPlusXtremeG DI-624 Manuale utente

D-Link

D-Link DVG-N5412SP Manuale utente

D-Link

D-Link DWR-113 Manuale utente

D-Link

D-Link DSL-G804V Manuale utente

Manuali Router wireless popolari di altre marche

Milesight

Milesight UG67 Manuale utente

Airlogic

Airlogic AirSync Class 1 Manuale del proprietario

Samsung

Samsung WCH730B Manuale utente

TELEFONICA

TELEFONICA USB Adapter Manuale utente

NETGEAR

NETGEAR PowerLINE WiFi 1000 Series Manuale utente

Askey

Askey RAC2V1K Manuale utente

Alloy

Alloy WLF2454AP-S Manuale utente

TP-Link

TP-Link TL-WR542G Manuale utente

NETGEAR

NETGEAR WNR2000v4 Manuale utente

Hama

Hama 53120 Manuale utente

Intellinet

Intellinet 524582 Manuale utente

Asus

Asus RT-N10P Manuale utente

Sapido

Sapido GR297n Manuale utente

Asus

Asus DSL-N55U Manuale utente

AMTC

AMTC WR7502 Manuale utente

Compaq

Compaq CP-2W - iPAQ Connection Point Manuale utente

SMC Networks

SMC Networks WBR14-N2 FICHE Manuale utente

Draytek

Draytek Vigor2120 Series Manuale utente