D-Link DIR-620 Manuale utente
Quick Installation Guide
DIR-620
Multifunction Wireless Router
Supporting GSM, CDMA, WiMAX
with uilt-in 4-port Switch
DIR-620 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Multifunction wireless router DIR-620
•Power adapter DC 5V/2.5A
•thernet cable (CAT 5 )
•CD-ROM with “User Manual” and “Quick Installation Guide”
•“Quick Installation Guide” (brochure)
If any of the items are missing, please contact your reseller.
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address o router 192.168.0.1
Username (login) admin
Password admin
Name o wireless network (SSID) DIR-620
2
DIR-620 Quick Installation Guide
System Requirements and Equipment
•A computer with any operating system that supports a web browser.
•A web browser to access the web-based interface of the router: Windows
Internet xplorer, Mozilla Firefox, Google Chrome, or Opera.
•A NIC ( thernet or Wi-Fi adapter) to connect to the router.
•An 802.11b, g, or n Wi-Fi adapter to create a wireless network.
•A WiMAX USB modem1 to connect to the Internet via a WiMAX
network2.
!
Some WiMAX operators require subscribers to activate their WiMAX
USB modems prior to using it. Please, refer to connection guidelines
provided by your operator when concluding the agreement or placed on its
website.
•A GSM or CDMA USB modem1 to connect to the Internet via GSM or
CDMA networks2.
!Your GSM or CDMA USB modem should be equipped with an active
identification card (SIM or R-UIM) of your operator.
1 For the list of recommended USB modems, refer to the Supported USB Modems
section of the “User Manual” document.
2 Contact your mobile operator to check whether the relevant service is subscribed and
to get information on the service coverage and fees.
3
DIR-620 Quick Installation Guide
CONNECTING TO PC (OS WINDOWS XP)
PC with Ethernet Adapter
1. Power off your PC.
2. Connect an thernet cable between any of LAN ports located on the back
panel of the router and the thernet port of your PC.
3. To connect via a WiMAX, CDMA or GSM network: connect your USB
modem to the USB port3 on the front panel of the router.
4. Connect the power cord to the port 5V-2.5A on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3 It is recommended to a USB extension cable to connect a USB modem to the router.
4
DIR-620 Quick Installation Guide
3. In the Local Area Connection Properties window, on the General
tab, in the This connection uses the ollowing items section, select
the Internet Protocol (TCI/IP) line. Click the Properties button.
5
DIR-620 Quick Installation Guide
4. Select the Obtain an IP address automatically radio button. Click
the OK button.
Click the ОК button. Now your computer is configured to obtain an IP address
automatically.
PC with Wi- i Adapter
1. To connect via a WiMAX, CDMA or GSM network: connect your USB
modem to the USB port4 on the front panel of the router.
2. Connect the power cord to the port 5V-2.5A on the back panel of the
router, then plug the power adapter into an electrical outlet or power strip.
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter.
4 It is recommended to a USB extension cable to connect a USB modem to the router.
6
DIR-620 Quick Installation Guide
Now you should configure your Wi-Fi adapter.
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. Select the icon of the wireless connection and make sure that your Wi-Fi
adapter is on.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the
needed wireless network (DIR-620) and click the Connect button.
After that the Wireless Network Connection Status window appears.
7
DIR-620 Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified: 192.168.0.1). Press
the Enter key.
3. On the opened page, enter the username (login) and password for the
administrator account (by default, the following username and password
are specified: admin, admin). Then click the Enter button.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
After successful registration the system statistics page opens. The page
displays general information on the router and its software.
!
It is strongly recommended to change the administrator password upon
initial configuration of the router. To do this, proceed to the System >
Administrator password page.
8
DIR-620 Quick Installation Guide
The web-based interface of the router is bilingual ( nglish/Russian). Select a
needed language from the menu displayed when the mouse pointer is over the
Language caption. You can change the language of the web-based interface in
any menu item.
If the PIN code check is enabled for the identification card of your CDMA or
GSM USB modem, the page for checking the PIN code is displayed after logging
in to the web-based interface of the router.
nter the PIN code in the relevant field and click the Apply button.
Configure the Internet connection in accordance with data given to you by the
relevant operator or provider when concluding the agreement or by its customer
service. Make sure that you have obtained all necessary information prior to
configuring your connection.
9
DIR-620 Quick Installation Guide
Connection via WiMAX network
If you want the router to connect to the Internet via a WiMAX USB modem
automatically after turning on, follow the steps below:
1. Proceed to the Net > Network inter aces page.
2. Follow the WIMAX link.
3. Select an interface type according to data of your WiMAX operator
(Static, DHCP, or PPPoE). If you have selected the Static type,
specify the needed settings.
4. Select the Auto choice of the Start radio button to enable automatic start
of the WIMAX interface upon turning on of the router.
5. Click the Change button.
6. On the Net > Network inter aces page, follow the WAN link.
7. Select the Manual choice of the Start radio button to disable automatic
start of the WAN interface upon turning on of the router.
8. Click the Change button.
Connection via CDMA or GSM Network
If you want the router to connect to the Internet via a CDMA or GSM USB
modem automatically after turning on, follow the steps below:
1. Proceed to the USB modem > In ormation page.
2. Select a value corresponding to the network type you want to use from
the Enable USB modem drop-down list.
10
Altri manuali per DIR-620
7
Indice
Altri manuali D-Link Router wireless
D-Link
D-Link DSL-2790U Manuale utente
D-Link
D-Link N300 Manuale utente
D-Link
D-Link DIR-841 Manuale utente
D-Link
D-Link DWR-932 Manuale utente
D-Link
D-Link DIR-815 Manuale utente
D-Link
D-Link DIR-826L Manuale utente
D-Link
D-Link GO-RT-N150 Manuale utente
D-Link
D-Link DWR-161 Manuale utente
D-Link
D-Link DSL-G604T Manuale utente
D-Link
D-Link DVG-N5402FF Manuale utente
D-Link
D-Link DIR-450 - 3G Mobile Router Wireless Manuale utente
D-Link
D-Link Ethernet Broadband Router DIR-100 Manuale utente
D-Link
D-Link DIR-860L Manuale utente
D-Link
D-Link DSL-2650U Manuale utente
D-Link
D-Link DSL-2790U Manuale utente
D-Link
D-Link DSL-2790U Manuale utente
D-Link
D-Link DAP-1720 Manuale utente
D-Link
D-Link COVR C1200 Manuale utente
D-Link
D-Link COVR-2202 Manuale utente
D-Link
D-Link DSL-2640B Manuale utente
