1
1. PRODUCT SPECIFICATIONS
AUDIO SECTION
Maximum output power : 35watts per channel into 4 ohms.
Load impedance : 4 ohms
Total harmonic distortion : Less than 10% at 12 watts
Fre uency response : 100Hz( + 3
dB
), 10kHz(-5 + 3
dB
)
Control Bass / Treble : 10 + 3
dB
at 100Hz/10kHz
TUNER SECTION
(FM) Tuning range : 87.5 to 108MHz
Usable Sensitivity (MONO) : 12
dB
uV
(4
uV
/ 75ohms)
Signal to noise ratio (at 60dBu)
: More than 50
dB
(MW) Tuning range : 522 to 1620kHz at Europe
530 to 1710kHz at U.S.A
Usable Sensitivity : 30dBuV (75ohms at 100kHz)
(LW) Tuning range : 144 to 288kHz
Usable Sensitivity : 40dBuV
CD SECTION
Signal to Noise ratio : 70dB (Using the A filter)
Dynamic range : 85dB
Channel Separation : 50dB
Total Harmonic distortion : 0.1%
Revolution : 12m/s~1.4m/s (500rpm~200rpm)
Laser (semiconductor laser) : Wave length 785nm
GENERAL
Power re uirements : DC 12.0V / Rated : 14.4V
(Usable : 10.8 ~15.6V)
Negative ground
Current consumption : 10A Maximum
Dimension (W x H x D) : 178 x 50 x 156 mm
Weight(Net) : 1.75 kg
Design and specifications are subject to changes for improvements without notice.
<Notes on handling the optical pick-up block or base unit>
The laser diode in the optical pick-up block may suffer electrostatic breakdown because of the potential
difference generated by the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic breakdown and also use the procedure in the printed matter which is
included in the repair parts.
The flexible board is easily damaged and should be handled with care.
<Caution>
*Use of controls or adjustments or performance of procedure other than those specified here-in may result in
hazardous radiation exposure.
* During repair, do not take the Optical Pick-up block apart.
If there is a breakdown in the Optical Pick-up block (including laser diode), replace the entire deck mechanism.
