Dahua ARK50C-R Manuale utente
Alarm Keypad
User’s Manual
V1.0.0
ZHEJIANG DAHUA VISION TECHNOLOGY CO., LTD.
User’s Manual
I
Foreword
General
This manual introduces the functions and operations of the alarm keypad (hereinafter
referred to as "the keypad").
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in property
damage, data loss, lower performance, or unpredictable result.
TIPS Provides methods to help you solve a problem or save you time.
NOTE
Provides additional information as the emphasis and supplement to
the text.
Revision History
Version Revision Content Release Time
V1.0.0 First release. July 2021
Privacy Protection Notice
As the device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and car plate number. You need to be in compliance with your local privacy protection
laws and regulations to protect the legitimate rights and interests of other people by implementing
measures which include but are not limited: Providing clear and visible identification to inform
people of the existence of the surveillance zone and provide required contact information.
About the Manual
The manual is for reference only. Slight differences might be found between the manual and the
product.
We are not liable for losses incurred due to operating the product in ways that are not in
User’s Manual
II
compliance with the manual.
The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user’s manual, use our CD-ROM, scan the QR code or
visit our official website. The manual is for reference only. Slight differences might be found
between the electronic version and the paper version.
All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
There might be errors in the print or deviations in the description of the Descriptions,
operations and technical data. If there is any doubt or dispute, we reserve the right of final
explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
Please visit our website, contact the supplier or customer service if any problems occur while
using the device.
If there is any uncertainty or controversy, we reserve the right of final explanation.
User’s Manual
III
Important Safeguards and Warnings
This section introduces content covering the proper handling of the Device, hazard prevention, and
prevention of property damage. Read carefully before using the Device, comply with the guidelines
when using it, and keep the manual safe for future reference.
Operation Requirements
Transport, use and store the device under allowed humidity and temperature conditions.
Prevent liquids from splashing or dripping on the device. Make sure that there are no objects
filled with liquid on top of the device to avoid liquids flowing into it.
Do not disassemble the device.
Only use the device within the rated power range.
Make sure that the power supply of the device works properly before use.
Do not pull out the power cable of the device while it is powered on.
Installation Requirements
Observe all safety procedures and wear required protective equipment provided for your use
while working at heights.
Do not expose the device to direct sunlight or heat sources.
Do not install the device in humid, dusty or smoky places.
Install the device in a well-ventilated place, and do not block the ventilator of the device.
Strictly abide by local electrical safety standards, and make sure that the voltage in the area is
steady and conforms to the power requirements of the device.
Use the power adapter or case power supply provided by the device manufacturer.
Connect the device to the adapter before power on.
Do not connect the device to more than one power supply. Otherwise, the device might
become damaged.
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the device label.
Connect class I electrical appliances to a power socket with protective earthing.
User’s Manual
IV
Table of Contents
Foreword............................................................................................................................................................ I
Important Safeguards and Warnings............................................................................................................. III
1 Overview ........................................................................................................................................................ 1
2 Wiring and Installation.................................................................................................................................. 2
Wiring .............................................................................................................................................................................................2
Installation ....................................................................................................................................................................................4
2.2.1 Surface Mount................................................................................................................................................................4
2.2.2 Flush Mount....................................................................................................................................................................5
3 Operation....................................................................................................................................................... 6
Initialization..................................................................................................................................................................................6
Function Key ................................................................................................................................................................................7
Operation Modes and Passcodes.........................................................................................................................................9
User Permissions ........................................................................................................................................................................9
Global Mode.................................................................................................................................................................................9
3.5.1 Arming and Disarming .............................................................................................................................................10
3.5.2 Cancel Alarm.................................................................................................................................................................10
3.5.3 Bypass and Isolate ......................................................................................................................................................11
3.5.4 Relay ................................................................................................................................................................................11
3.5.5 PSTN Test........................................................................................................................................................................12
3.5.6 Restarting Controller .................................................................................................................................................12
3.5.7 Initializing Controller.................................................................................................................................................13
3.5.8 Restoring to Default...................................................................................................................................................13
Programming Mode................................................................................................................................................................14
3.6.1 Entering Programming Mode ................................................................................................................................14
3.6.2 User Management......................................................................................................................................................14
3.6.3 Zones...............................................................................................................................................................................18
3.6.4 Relay ................................................................................................................................................................................26
3.6.5 Siren .................................................................................................................................................................................30
3.6.6 Alarm Receiving Center............................................................................................................................................31
3.6.7 Test Report.....................................................................................................................................................................36
3.6.8 CID Linkage ...................................................................................................................................................................38
3.6.9 Printer..............................................................................................................................................................................42
3.6.10 Subsystem...................................................................................................................................................................50
3.6.11 Registering..................................................................................................................................................................52
3.6.12 Alarm Center ..............................................................................................................................................................54
3.6.13 Network (2G/4G).......................................................................................................................................................56
3.6.14 Alarm Receiving Center .........................................................................................................................................58
3.6.15 Network (TCP/IP) ......................................................................................................................................................64
3.6.16 Keyfob Key Bindings................................................................................................................................................67
3.6.17 Keypad..........................................................................................................................................................................68
3.6.18 Card Key Bindings ....................................................................................................................................................68
3.6.19 Web Access Control .................................................................................................................................................69
User’s Manual
V
3.6.20 NIC 2..............................................................................................................................................................................69
3.6.21 Arming..........................................................................................................................................................................70
3.6.22 Keypad RS-485 Address .........................................................................................................................................71
3.6.23 Keypad Display Time...............................................................................................................................................72
3.6.24 Wired Network...........................................................................................................................................................72
3.6.25 Alarm Controller .......................................................................................................................................................73
3.6.26 2G/4G Modules .........................................................................................................................................................73
3.6.27 Exiting Programming Mode .................................................................................................................................74
Walk Test Mode .........................................................................................................................................................................75
3.7.1 Entering Walk Test Mode..........................................................................................................................................75
3.7.2 Exiting Walk Test Mode .............................................................................................................................................75
Keypad Command Table ............................................................................................................ 76
Cybersecurity Recommendations ............................................................................................. 82
User’s Manual
1
1Overview
Specially designed to work with ARC9 and ARC2 series alarm controllers, the alarm keypad can
configure arming and disarming settings, controller systems and can display the system status.
User’s Manual
2
2Wiring and Installation
Wiring
Use a slotted screwdriver to remove the rear panel.
Rear panel
Connect the wiring with the alarm controller and the keypad.
User’s Manual
3
Wiring
User’s Manual
4
Installation
Hole size (mm)
2.2.1 Surface Mount
Fix the keypad to the wall with screws.
Drill 3 holes into the wall according to the hole size.
Pull the wires out the outlet, lead them along the groove, and connect them to the alarm
controller.
Attach the real panel to the wall with screws.
Attach the front panel to the rear panel.
Indice
