Daikin FTE09JV2S Manuale utente

REMOVAL

PROCEDURE

SERVICE MANUAL

Indoor Unit

Inverter/Non-Inverter

Wall Mounted Type

9000/12000 Btu/h Class

Si04-960

Service Manual

Removal Procedure

Indoor Unit

zCooling Only zHeat Pump

FTE09JV2S

FTE12JV2S

FTXS09HVJU

FTXS12HVJU

Si04-960

Removal Procedure 1

Table of Contents

1. Removal of Air Filter................................................................................2

2. Removal of Front Grille ...........................................................................4

3. Removal of Horizontal Blades / Vertical Blades......................................6

4. Removal of Electrical Box / PCB / Swing Motor......................................8

5. Removal of Indoor Heat Exchanger......................................................13

6. Removal of Drain Plug (Right / Left Replacement) ...............................16

7. Removal of Fan Rotor / Fan Motor........................................................17

Note: The illustrations may be slightly different depending on the model.

Removal of Air Filter Si04-960

2Removal Procedure

1. Removal of Air Filter

Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies

before disassembling work.

Step Procedure Points

1. External features

If ON/OFF button is pressed

for 5 seconds, a forced

cooling operation is carried

out for approx. 15 minutes.

2. Remove the air filters.

1Hold the protrusions on

the left and right sides

of the front panel and

open the front panel

until it stops with a click.

2Lift the center section of

the air filter and

disengage the hooks.

Remove the air filter by

pulling it forward.

Left and right filters are

interchangeable.

When reassembling, insert

air filter along the guide.

ON/OFF button

Operation

lamp (Green)

Timer lamp

(Yellow)

Signal

receiver

(R4108)

Front panel

(R3089)

Air filter

(R2511)

Si04-960 Removal of Air Filter

Removal Procedure 3

3. Remove the front panel.

1Open up the panel to

the position higher than

where it stops.

Support the front panel by one

hand, while remove the rotation

axis at the upper center by the

other hand.

2Remove the front panel

from the unit.

When reassembling the front

panel, make sure that the

rotation axes are in the guide

groove, and then shut the

panel.

Step Procedure Points

Slide the center rotation axis to the left and remove it out.

Rotation axis

(R2512)

(R2513)

(R2514)

Removal of Front Grille Si04-960

4Removal Procedure

2. Removal of Front Grille

Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies

before disassembling work.

Step Procedure Points

1. Remove the service cover.

1Remove the screw of

the service cover.

Open the service cover

upward.

2. Remove the front grille

assembly.

1Remove the 2 screws,

which fix the front grille

to the main body.

(R2022)

Service cover

Connection

wires

(R10729)

(R2517)

16mm

(R2518)

Si04-960 Removal of Front Grille

Removal Procedure 5

2Release the 2 hooks on

the upper part.

In case that the hooks

cannot be pressed from

above, remove the front

panel and then remove

the front grille while

pushing the hook

through a clearance

between the front grille

and the heat

exchanger.

At the upper part there are 2

hooks.

Release the hooks by

pressing knobs with a flat

screwdriver.

3The front grille can be

removed by pulling out

the upper part forward

and lifting up the lower

part.

When reassembling the

front grille, make sure

whether each hook is set as

it was.

Step Procedure Points

Front

grille

Hook

(R2519)

(R2520)

Front grille

(R2521)

Removal of Horizontal Blades / Vertical Blades Si04-960

6Removal Procedure

3. Removal of Horizontal Blades / Vertical Blades

Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies

before disassembling work.

Step Procedure Points

1. Remove the horizontal

blades.

1Open the horizontal

blade.

2Disengage the

horizontal blade from

the retaining section.

3Bend the horizontal

blade slightly and

remove it from the unit.

Horizontal blade

(R2522)

(R2523)

(R2524)

Si04-960 Removal of Horizontal Blades / Vertical Blades

Removal Procedure 7

For reassembling.

1. Since the key pattern hook

is provided on the right side,

insert the edge of the blade

to the pivot while rotating it.

2. Fit the horizontal blade to

the other 2 pivots.

2. Remove the vertical blades.

1Disengage the vertical

blades from the fixing

plate.

2Remove the vertical

blades forward.

5 vertical blades are

integrated with the joint rod.

(Only one blade cannot be

exchanged.)

Step Procedure Points

(R2032)

Vertical blades

(R3090)

Fixing plate

(R2527)

Removal of Electrical Box / PCB / Swing Motor Si04-960

8Removal Procedure

4. Removal of Electrical Box / PCB / Swing Motor

Procedure Warning Be sure to wait 10 minutes or more after turning off all power supplies

before disassembling work.

Step Procedure Points

Remove the front grille.

1. Remove the electrical box.

1Disconnect the

connecting wires.

2Remove the screw on

the wire fixture.

Pay attention to the direction

of the retainer of the

thermistor so that the

retainer does not touch the

harness.

3Disconnect the

connectors for fan

motor [S1] [S7].

4Disconnect the

connector for swing

motor [S6].



5Pull out the indoor heat

exchanger thermistor.

Terminal board

Indoor heat exchanger

thermistor

Swing motor

Earth screw

[S1]

[S7]

[S6]

(R18517)

Wire

fixture

(R18518)

Indoor heat

exchanger

thermistor

Retainer of

thermistor

[S1]

Connector

for fan motor

[S7]

Connector

for fan motor

[S6]

Connector

for swing

motor

(R18519)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Daikin Condizionatore d'aria

Daikin

Daikin FTKD42GVM Manuale utente

Daikin

Daikin FBQ20EAVAK Manuale utente

Daikin

Daikin CTX07AXVJU Manuale utente

Daikin

Daikin Super Multi NX B series Manuale utente

Daikin

Daikin FTKD25DVM Manuale utente

Daikin

Daikin FTXS18DVJU Manuale utente

Daikin

Daikin Super Multi NX ATXS25G2V1B Manuale utente

Daikin

Daikin VRVIII-S Series Manuale di istruzioni

Daikin

Daikin SUPER MULTI NX FDXS12LVJU Manuale utente

Daikin

Daikin RXN09KEVJU Manuale utente

Daikin

Daikin FTXTA-CW Manuale utente

Daikin

Daikin FTXN-LV Manuale di programmazione

Daikin

Daikin FTXTA30C2V1BB Manuale utente

Daikin

Daikin Multi+ R32 Split Series Come usare

Daikin

Daikin FFQ25B9V Manuale di istruzioni

Daikin

Daikin Altherma EHVH04S23DAV Manuale utente

Daikin

Daikin RKS50BVMB9 Manuale di istruzioni

Daikin

Daikin FXMQ07PVJU Manuale utente

Daikin

Daikin EWAQ004BAVP Manuale di installazione

Daikin

Daikin VRV W T-series Manuale utente

Daikin

Daikin Altherma EABH16DA6V Manuale utente

Daikin

Daikin FTXTP35M5V1B Come usare

Daikin

Daikin DDC Series Manuale

Daikin

Daikin Quaternity FTXG09HVJU Manuale utente

Manuali Condizionatore d'aria popolari di altre marche

Spheros

Spheros CC 355 Manuale utente

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuale utente

Panasonic

Panasonic CS-E12HKEW Manuale utente

nedis

nedis ACMB1WT7 Manuale utente

Samsung

Samsung AR KV Series Guida

Fujitsu

Fujitsu Inverter ASBA30JFC Manuale utente

Toshiba

Toshiba RAS-M10SMUV-E Manuale utente

Hitachi

Hitachi RAS-E24CAK Manuale utente

CIAT

CIAT Magister 2 Series Guida

Bestron

Bestron AAC6000 Manuale utente

Hisense

Hisense 7K Manuale tecnico

Frigidaire

Frigidaire FFRE0533S1E0 Manuale utente

Samsung

Samsung AS09HM3N Manuale utente

Frigidaire

Frigidaire CRA073PU11 Manuale del proprietario

Soleus Air

Soleus Air GB-PAC-08E4 Manuale utente

McQuay

McQuay MCK020A Manuale utente

Webasto

Webasto Frigo Top 25 DS Manuale utente

Frigidaire

Frigidaire FAZ12ES2A Manuale utente