Daintree GE Current RAIL159 Manuale utente

Installation Guide

RAIL159 | 99003749

TR3 Front Lens Shell

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

CAN ICES-005 (A)/NMB-005(A)

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These

limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the

user will be required to correct the interference at his own expense.

• Removal of the internal power supply will void your warranty.

• Always WEAR gloves.

• Usage of a plastic and non-powered screwdriver is recommended to prevent lens

damage or scratching.

• DO NOT touch the front shell at ANY TIME without gloves.

• DO NOT rest the front shell on its external surface to avoid scratches.

• Failure to properly follow these instructions may cause signal to malfunction.

• The customer is responsible of the optical validation of the newly installed lens.

• This product is intended solely for the use of rail signaling and is not intended

for use in any other applications.

BEFORE YOU BEGIN

Read these instructions completely and carefully. If you prefer to have this Installation Instructions

document in other languages, visit our ocial website at: www.gecurrent.com/transportation

Prepare Electrical Wiring

Electrical Requirements

• Follow all National Electric Codes (NEC)

and local codes.

Important Information

WARNING / AVERTISSEMENT

RISK OF ELECTRIC SHOCK

Disconnect Before Servicing or installing product. The LED module must be installed into a signal head with adequate ingress

protection for the location (protection from the weather).

RISQUES DE DÉCHARGES ÉLECTRIQUES

Couper l’alimentation avant le dépannage ou avant l’installation du produit. Le module DEL doit être installé dans une tête de signal

avec une protection adéquate d’entrée pour l’emplacement (protection contre les intempéries).

TR3 Front Lens Shell Installation Guide

www.gecurrent.com

General Electric Company and are used under license. Information provided is subject to change without

notice. All values are design or typical values when measured under laboratory conditions.

RAIL159 (Rev 03/15/21) 99003749

Installation Steps

Lay down the lamp on a clean workbench

on its back shell to ensure no scratches on

the front shell. Remove the 4 top screws

and pull the front shell o.

Location pin

Using gloves, gently place the new front

shell on the back shell. Align the lens

location pin to the location pinhole on the

back shell.

The lamp is ready to be installed in the eld as per Current’s installation instructions.

Verify that the black gasket is well seated

in the lens. If required, use your ngers to

push it in place.

Insert and fasten all four screws into the

front shell. (Torque between 4 and 5 inch-

pounds).

NOTE: Screw stripping or lower torque may

cause water to penetrate the lamp.

NOTE: Failure to properly follow these instructions may cause signal to malfunction.

Pictures are for reference only. Actual lens shape may appear dierent.

Indice

Altri manuali Daintree Attrezzatura di illuminazione

Daintree

Daintree GE cirrent Tetra Rigid Light Bar Manuale utente

Daintree

Daintree GE Tetra Atom Manuale utente

Daintree

Daintree Contour Gen 2 Flex Manuale utente

Daintree

Daintree GE Tetra MAX Manuale utente

Daintree

Daintree GE current Evolve EFC1 Series Manuale utente

Daintree

Daintree GE Current Arize Factor Manuale utente

Daintree

Daintree GE current Tetra GETP35-2 Manuale utente

Daintree

Daintree GE Current UltraMax GED80MCC/Z2P1500 Manuale utente

Daintree

Daintree GE GEXNLG15 Manuale utente

Daintree

Daintree GE current Lumination RC Series Manuale utente

Daintree

Daintree GE Tetra miniMAX Manuale utente

Daintree

Daintree GE current Tetra PowerStrip Snap DS Manuale utente

Daintree

Daintree RM4 Manuale utente

Daintree

Daintree GE Current Lumination LRXD Series Manuale utente

Daintree

Daintree GE Forum Frame IND739 Manuale utente

Daintree

Daintree GE current Proline LEX Series Manuale utente

Daintree

Daintree GE Current Tetra GEPS12-25U-NA Manuale utente

Daintree

Daintree GE current Tetra Contour Manuale utente

Daintree

Daintree GE Current Tetra GEPS24-25U-NA Manuale utente

Daintree

Daintree GE current Immersion GELP24-100U-GLX Manuale utente

Daintree

Daintree GE current Lumination LRX Series Manuale utente

Daintree

Daintree GE current Tetra PowerStrip DS Manuale utente

Daintree

Daintree GE Current Arize Life2 Manuale utente

Manuali Attrezzatura di illuminazione popolari di altre marche

Brizo

Brizo 8SP-MU-4 Manuale utente

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuale utente

IKEA

IKEA BJÖRKSPIREA Manuale utente

Laserworld

Laserworld Evolution Series ES-400RGB Manuale utente

Alien

Alien RG STAR Manuale utente

EuroLite

EuroLite LED B-40 Manuale utente

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuale utente

Commercial Electric

Commercial Electric 54568141 Manuale utente

CREE LIGHTING

CREE LIGHTING 304 Series Manuale utente

Goobay

Goobay 49867 Manuale utente

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuale utente

Alkalite

Alkalite Krypton KT-81 Manuale utente

Clas Ohlson

Clas Ohlson GU10 Manuale utente

DTS

DTS DELTA 10 F Manuale utente

ring

ring Solar Steplight Manuale utente

One Stop Gardens

One Stop Gardens 57696 Istruzioni per il montaggio

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuale utente

SIREM

SIREM Swimeo A2 Manuale utente