dallmeier Semsy III VMC Touch Manuale utente
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
The Touch Monitor with the application VMC touch expands a SeMSy® III Workstation Software with a convenient multi-touch operation.
Many functions of the individual modules of a SeMSy® III Workstation Software can be operated easily and intuitively on the optimized user interface by
dragging, wiping, tapping, scrolling, zooming. As a result, users receive a much more exible way of operating.
The Touch Monitor must rst be mounted in the bracket and the required cable connections must be connected to the appropriate port before commis-
sioning.
NOTICE
Hardware Damage!
¾Leave the protective lm on the screen of the Touch Monitor for mounting.
¾Ensure a clean and at work space.
Step 1: Inserting Touch Monitor Into Bracket
¾Place the folded bracket on the surface of the work space.
Fig. 1
¾Insert the Touch Monitor carefully into the bracket.
Fig. 2
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
¾Slide the Touch Monitor under the clamping component at the
front of the bracket and place it in this securely.
Clamping component
Fig. 3
The Touch Monitor is now inserted into the bracket.
Fig. 4
NOTICE
Hardware Damage!
The Touch Monitor is not xed in the bracket. Be careful when you move the
bracket with inserted Touch Monitor.
Step 2: Connecting The Cables To The Ports
¾Lift the bracket with the inserted Touch Monitor and lock the kick
stand at the rear side of the bracket.
Two cables are included in the scope of delivery:
• Micro USB (type B) to USB (type A)
• Micro HDMI (type D) to HDMI (type A)
Fig. 5
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
Combined micro USB port for data and power supply
¾Connect the USB cable with the micro USB connector to the
USB1 port on the Touch Monitor.
Fig. 6
Micro HDMI port for image data transmission
¾Mount the USB cable into the cable conductor.
¾Connect the HDMI cable with the micro HDMI connector to the
micro HDMI port on the Touch Monitor.
Fig. 7
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
¾Mount the HDMI cable into the cable conductor.
Fig. 8
Step 3: Rotate Touch Monitor With Bracket On The Screen Side
¾Guide the two cables from the cable conductor over the hinge
of the bracket.
Fig. 9
¾Lift the bracket upwards and guide the two cables around the
hinge on the rear side.
The two cables must be placed around the hinge in order to ensure
proper operation of the Touch Monitor.
Fig. 10
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
¾Place the Touch Monitor with the bracket on the hinge carefully.
¾Always make sure that the Touch Monitor does not slip out of
the bracket.
Fig. 11
NOTICE
Hardware Damage!
The Touch Monitor is not xed in the bracket. Be careful when you move the
bracket with inserted Touch Monitor.
¾Place the bracket with the inserted Touch Monitor on the side of
the screen carefully.
¾Always make sure that the Touch Monitor does not slip out of
the bracket.
Fig. 12
Fig. 13
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
Step 4: Attach Cables Into The Cable Conductors On The Rear Side
¾Loosen the screws on the three cable conductors using a Phil-
lips screwdriver (size PH2).
Fig. 14
¾Place the two cables along the course of the cable conductors.
¾Always make sure that the two cables are routed around the
hinge.
Fig. 15
¾Insert the three cable conductors back into their positions.
¾Attach the cable conductors with the screws.
Fig. 16
V1.0.0 2016-05-02 We reserve the right to technical modications, errors and misprints. © 2016 Dallmeier electronic
www.dallmeier.com
VMC Touch: Mounting Monitor Bracket
Ports Connection And Cables Installation
All trademarks identied by ® are registered trademarks of Dallmeier electronic.
Fig. 17
Step 5: Set Up Touch Monitor In Operating Position
¾Lift the bracket with the inserted Touch Monitor and turn it back
carefully to the other side with the screen upwards.
¾Lift the Touch Monitor and lock the kick stand at the rear side of
the bracket.
Fig. 18
¾Proceed for the further commissioning of the Touch Monitor as described in the documentation “Commissioning” for “VMC Touch”.
Indice
