D&K Expression 42 Manuale utente
EXP 42” Pouch Laminator
Owner’s Manual
MADE IN U.S.A.
1
Table of Contents
About the Manual...............................................................................................................................................................................2
Introduction...............................................................................................................................................................................................3
Safety Precautions................................................................................................................................................................................4
Understanding Your Laminator..................................................................................................................................................5
Unpacking, Setup and Installation..........................................................................................................................................5
Control Panel...........................................................................................................................................................................................6
Nip Adjusters...........................................................................................................................................................................................7
Mounting Using a SuperStick® Pouch Mounting System......................................................................................8
Mounting Using a Superstick® Mounting Board .......................................................................................................9
Mounting and Laminating Using a SuperStick® Pouch Board.........................................................................10
Encapsulating with a SuperStick® Flexible Pouch or Release Board...........................................................11
Cleaning Your EXP 42” Pouch Laminator...........................................................................................................................12
Specifications...........................................................................................................................................................................................12
Terms & Conditions.............................................................................................................................................................................13
Parts List.......................................................................................................................................................................................................14-16
2
About this Manual:
READ ME FIRST!
This manual contains all the information you need to properly unpack, operate and maintain your
Laminator. Before unpacking your laminator we suggest you read and follow the manual step by step. It
contains essential information about each and every facet of your laminator. Pay special attention to the
work environment and safety precautions necessary for your laminating unit.
Please pay special attention to particular notes and caution statements. These comments alert you to
information that we feel essential to operator Safety and damage prevention to the laminator.
Copyright Information:
IMPORTANT: This manual is copyright protected by D&K Group Inc. in accordance with the laws and
requirements of the United States Government. Any reproduction of this manual, in part or in full, without
the written permission of D&K Group Inc. constitutes a violation of the U.S. copyright laws and is subject to
prosecution.
3
Introduction
Thank you for purchasing a EXP 42” Pouch laminator. We have designed the EXP 42” Pouch to give you
years of reliable service. As you become familiar with the EXP 42” Pouch, you will appreciate the high
quality of its production and the excellence in its engineering design.
By following the guidelines outlined in this manual for proper care and use of the EXP 42” Pouch
laminator, you can depend on many years of trouble-free profitability from your investment.
The purpose of this manual is to outline the materials and process when using SuperStick® supplies with
your laminator to create signs, displays, and flexible graphics with professional results. The manual
includes instructions of various laminating procedures, which are meant to give you comprehensive
information needed for the efficient use of your laminator.
Statement of Intended Use
The EXP 42” Pouch laminator has been designed to be used with SuperStick® Pouch Boards and
SuperStick® Flexible Pouches. When used with these products, you are able to mount, mount and
laminate, and encapsulate prints in one step.
4
Safety Precautions
WARNING: Please review the following safety precautions before unpacking your new laminator.
When using electrical appliances, basic precautions should always be taken to reduce the risk of
electrical shock and injury to persons, including the following:
Read all instructions before connecting or operating this unit.
Retain this Owners Manual for future reference. For technical assistance beyond what is covered in
this manual contact Technical Service.
SAVE YOUR CARTON! EXP 42” Pouch laminators are shipped in special cartons that protect them
from damage. Please store your carton in case your Laminator should ever require service or need
to be transported. (
see warranty limitation
s)
Do not use the laminator for anything other than its intended use.
The laminator case may be cleaned with a lint-free cloth, lightly dampened with a mild soap and
water solution. Do not use spray-on cleaners.
Do not immerse any part of the laminator in water or any other liquid.
This unit should be situated away from heat sources such as heat registers or stoves.
The laminator’s location or position should not interfere with its proper ventilation. Do not install or
place in a built-in enclosure such as a bookcase.
Do not operate the laminator with a damaged cord or plug, or after the laminator has been
dropped or damaged in any manner. Return the laminator to your dealer for examination, repair
or adjustment.
Do not let the cord hang over the edge of a counter or touch hot surfaces.
Always unplug the laminator when it will not be in use for a long period.
A socket-outlet shall be installed near the equipment and shall be easily accessible.
Save these instructions
5
Understanding Your Laminator
The EXP 42” Pouch Laminator is a professional laminator designed for ease of use. The process
temperature has been preset to eliminate operator guesswork. The factory settings will facilitate good
quality results using SuperStick® brand Flexible Pouches and Pouch boards. The EXP 42” Pouch can
handle Flexible Pouches and Pouch boards up to 42 inches wide and ½” thick.
Unpacking, Setup and Installation
1. Open the box and lift the machine out (at least two persons necessary!). Grasp the machine 8-10”
(200mm-250mm) from either side.
2. Place the machine on the work area described in the previous page.
3. Remove the protective sheet, placed between the rollers. To do this: pull the knob fully outward
(located on the left side of the machine) and rotate clockwise.
4. Inspect the machine for any physical damage (if damage does exist, report this to the Freight
Company or Dealer to file a claim.)
5. Plug the power cable into the grounded outlet with appropriate service as described in the previous
page.
6. Wait 10-15 minutes to allow the unit to achieved operating temperature.
7. When the (heat) LED is blinking, you are ready to use your EXP 42” Pouch laminator.
NOTE: Set the nip to a position other than fully closed when not in use.
NOTE: The laminator may emit steam the first few times it is used. There is no need for alarm. This is
normal (relates to the lubrication system) and will cease after several minutes of use.
6
Control Panel
LED Design
The LED light indicates the status of heat on or off and whether the machine is at the appropriate
temperature. Please see below for the definitions of the LED status lights.
Switch Design
The switch controls whether heat is on or off and the direction the rolls turn. Please see below for detailed
instructions.
Temperature Ready
when blinking
LED Indicator
Speed Control
Heat (ON/OFF)
Control Switch
Roller Direction
Control Switch
7
Nip Adjusters
The Nip Adjusters are Located on the left hand side of the laminator and is operated from the front of the
machine.
The Nip Adjusters are used to adjust the height of the rollers.
To Operate the Nip Adjusters:
Grasp it with your left hand and pull out approximately 1/4” (6mm) to the left.
Once the knob has disengaged from the stop, it may be rotated forward or backward (clockwise or
counter-clockwise, as viewed from the left hand side of the unit).
To Set the Height of the Rollers:
Continue to rotate the Nip Adjusters until the desired measurement corresponds with the indicator of
the knob.
Select the measurement that indicates the thickness of the material you will be using with the machine.
Release the knob so that it moves back to the right and clicks into place, this will set the rollers for use.
The measurements on the knob, ½”, ¼” (6mm), 3/16” (5mm), 1/8” (3mm) and 1/16” (1.5mm) correspond
to board thickness’.
For additional pressure, stop control knob between indicated thicknesses. There is also a fully closed
stop, 0” (0mm) for film pouch applications.
8
Mounting using SuperStick Pouch Mounting System
Step One
Insert your print into the SuperStick Mounting & Laminating Pouch.
Step Two
Place the SuperStick Pouch on the surface of virtually any rigid
substrate or foam board – NO ADHESIVE NECESSARY!
Step Three
Pass the SuperStick pouch and board combination through the
SuperStick heated roll laminator. It comes out done!
Step Four
Display your finished product. That’s it!
Indice
Altri manuali D&K Plastificatrice
