Danfoss G 4500 Manuale utente

Installation Guide

How to apply Molycote G 4500 grease

for ICM motor operated valves

© Danfoss A/S (MWA), 2021-01 AN149686416719en-000401 | 1

027R9787

027R9787

Apply the molycote G4500 grease

(supplied with ICAD) to the O-ring

grove on the ICM adapter and

O-ring. Then install the greased

O-ring into the groove on the ICM

adapter as shown in the picture.

Apply another layer of grease over the O-ring

as shown in the picture.

Remove the O-ring on the ICM adapter with

your ﬁngers. Do not use any tool because it

could damage the O-ring.

For ICM in service

If there is any ice or moisture present,

it must be removed prior to applying

the grease. The ice can be melted with

an electric heater or hair dryer.

O-ring

Info for UK customers only:Danfoss Ltd. Oxford Road, UB9 4LH Denham, UK

2 | AN149686416719en-000401 © Danfoss A/S (MWA), 2021-01

Move down

to stop

Close ICM by turning the multi-function

tool counter-clockwise, until it cannot be

tightened further.

Open ICM by turning the multi-function tool

appox. 1 turn clockwise.

Install the ICAD actuator on the ICM adapter

making sure it is pushed completely down.

Fasten the set screws using a 2.5 mm hexagon

key

Set screws

For ICAD already electrical connected

to control system.

Program ICAD to manual mode.

(i01=2).

Install the ICAD actuator on the ICM

adapter making sure it is pushed

completely down. Fasten the set

screws using a 2.5 mm hexagon key.

Program ICAD to calibrate to the

actual ICM valve - i10 (password)

and i26 (selection of ICM size).

Await calibration to ﬁnish.

Return ICAD to normal operation.

(i01=1)

Indice

Altri manuali Danfoss Motore

Danfoss

Danfoss OMS Manuale utente

Danfoss

Danfoss H1B060 Manuale utente

Danfoss

Danfoss EM-PMI540-T2000 Manuale utente

Danfoss

Danfoss EM-PMI300-T310 Manuale utente

Danfoss

Danfoss VLT DriveMotor FCP 106 Istruzioni operative

Danfoss

Danfoss EM-PME375 Series Manuale utente

Danfoss

Danfoss MAH Series Manuale utente

Danfoss

Danfoss VLT OneGearDrive Manuale utente

Danfoss

Danfoss EM-PMI540-T3000 Manuale utente

Danfoss

Danfoss VLT OneGearDrive ExtensionBox Manuale utente

Danfoss

Danfoss VLT OneGearDrive Manuale utente

Danfoss

Danfoss EM-PMI300-T310 Manuale utente

Danfoss

Danfoss 51 Series Manuale

Danfoss

Danfoss EM-PMI540-T1500 Manuale utente

Danfoss

Danfoss TMTHW Series Manuale

Danfoss

Danfoss 51 Series Guida all'installazione

Danfoss

Danfoss Series 20 Guida all'installazione

Danfoss

Danfoss H1 Series Manuale

Danfoss

Danfoss EM-PMI540-T2000 Manuale utente

Danfoss

Danfoss H1B 060 Manuale utente

Danfoss

Danfoss OMM EM Manuale utente

Danfoss

Danfoss EM-PMI540-T4000 Manuale utente

Danfoss

Danfoss FCM 300 Series Scheda tecnica

Danfoss

Danfoss TMT W FL Guida all'installazione

Manuali Motore popolari di altre marche

Rotax

Rotax 125 senior MAX evo Manuale utente

Kohler

Kohler K361 Manuale utente

MTD

MTD OHV Series Manuale utente

Kohler

Kohler COMMAND CH18-745 Manuale utente

Mercury

Mercury D4.2L D-Tronic Manuale utente

Selve

Selve SE Plus-RC Series Manuale utente

Perkins

Perkins 1206E-E66TA Manuale utente

Skov

Skov DA 174 Manuale

Rossi

Rossi TX11 Series Manuale utente

Siemens

Siemens SIMOTICS T-1FW3 Foglio di istruzioni

AL-KO

AL-KO PRO 350 Manuale utente

MTU

MTU 12 V 4000 Lx4 Manuale utente

Nanni

Nanni N3.30 Manuale di istruzioni

Nanni

Nanni N5.160 CR2 Manuale utente

KSB

KSB SuPreme Series Istruzioni per l'installazione

Hiwin

Hiwin EM1 Series Manuale utente

Rotax

Rotax 912 i series Istruzioni operative

Siemens

Siemens SIMOTICS XP 1MB1 Manuale utente