Danfoss CF-RF Manuale utente

088U0213

GB Instruction CF-RF Room Thermostat with Infrared Floor Sensor

DInstruktion CF-RF Raumthermostat mit Infrarot-Bodensensor

DK Vejledning CF-RF Rumtermostat med infrarød gulvsensor

FInstructionThermostat d’ambiance CF-RF avec Capteur au sol infrarouge

SE Bruksanvisning CF-RF rumstermostate med infraröd golvsensor

PL Instrukcja obsługi termostatu z czujnikiem podłogowym CF-RF

NL Handleiding voor CF-RF kamerthermostaat met infrarood vloersensor

IIstruzioni CF-RF con sensore a pavimento a raggi infrarossi

1VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

GB Instruction .......................3

DInstruktion ......................13

DK Vejledning ......................25

FInstruction ......................35

SE Bruksanvisning . . . . . . . . . . . . . . . . . . 45

PL Instrukcja obsługi. . . . . . . . . . . . . . . . 55

NL Handleiding.....................65

IIstruzioni........................75

2VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

3VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

GB Index

1. Functional Overview ...............................................4

2. Installation ...................................................................4

3. Temperature Settings...............................................6

4. Transmission Test ......................................................9

5. Mounting .....................................................................9

6. Uninstallation .......................................................... 10

7. Specications........................................................... 11

8. Troubleshooting...................................................... 12

9. Figures and Illustrations................................ A1-A2

4VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

1. Functional Overview

Front - g. 1

Up/down selector

Push button

Red LED (behind the cover)

InfraRed oor sensor

LED modes

Permanent light ON

No light OFF

Slow ashing Flashes

Fast ashing Flickers

Back - g. 2

Back plate

Back plate lock/unlock (turn 90°)

Screw hole for wall mounting

Battery placement

Screw and wall plug

Note: To activate batteries please remove enclosed strips

from batteries

2. Installation

Note:

• To activate batteries in the Room Thermostat, please

remove enclosed strips from the batteries.

• The assignment of the Room Thermostats to the Master

Controller should be within 1½ m distance

5VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

Activate Install mode on Master Controller

- g. 1.

• Use the menu selection button to select the

Install mode. Install LED ashes

• Activate Install mode by pressing OK . Install

LED goes ON

Activate Install mode on Room Thermostat

• Press the push button . LED and icker

during communication

Select output on Master Controller

• All available output LEDs on Master Controller

light up, and the rst of them ashes

• Press output selection button , to select

desired output (ashes) and accept with OK

• All output LEDs go OFF. Selected output

stays ON shortly

Room Thermostat installation status

• Satisfactory - LED goes OFF

• Not satisfactory - LED ashes 5 times

Note: A Room Thermostat can be assigned to several

outputs if needed by repeating the installation process.

6VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

3. Temperature Settings

Digital Display - g. 1

Set value adjustment

Minimum temperature limitation

Maximum temperature limitation

Lock icon (settings locked from Remote

Controller, CF-RC)

Transmission link icon

Low battery indicator

Alarm icon

Timer icon (time program is active from

Remote Controller, CF-RC)

Room temperature

Floor surface temperature

Changing default display temperature - g. 1.

1. The actual room temperature is shown in the

display as default

2. To change default display from actual room

temperature to actual oor surface tempera-

ture, press and hold the push button

until SET MAX is shown in the display

3. Press the button shortly and repeatedly

until or is ashing in the display

4. Press the up/down selector to select the

new default display temperature:

Room temperature

Floor surface temperature

7VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

Setting of room temperature

1. Make sure actual room temperature is shown

in the display

2. Press the up/down selector to set the

desired room temperature value. SET is shown

in the display

3. When releasing the up/down selector the

display returns to actual temperature

Note: The thermostat regulates the oor heating system

according to room temperature set point, within the

maximum and minimum limitations dened for the oor

surface temperature

Room temperature limitation

1. Make sure actual room temperature is shown

in the display

2. Press the push button until SET MAX is

shown in the display

3. Press the up/down selector to set the

maximum room temperature limitation

4. Press the push button shortly, SET MIN is

shown in the display

5. Press the up/down selector to set the

minimum room temperature limitation

6. Press the push button shortly and the

actual oor surface temperature is shown in

the display

8VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

Floor surface temperature limitation

1. Ensure actual oor surface temperature is

shown in the display illustrated by

2. Press and hold the push button until SET

MAX is also shown in the display

3. Press the up/down selector to set the

maximum oor surface temperature limitation

4. Press the push button shortly, SET MIN is

also shown in the display

5. Press the up/down selector to set the mini-

mum oor surface temperature limitation

IMPORTANT!

As heat emission from the oor may vary slightly

depending on oor covering - and thereby cause

inaccurate temperature measurement - it may be

necessary to adjust the setting of max. and min.

oor surface temperatures accordingly.

! It is important always to follow recommendations

from the oor manufacturer regarding max. oor

surface temperature.

! It is recommended always to include mixing shunt

for oor heating circuits in order to ensure optimal

ow temperature. - In addition to minimised energy

consumption, correct setting of the ow tempera-

ture will eliminate the risk of excessive heat transfer

to the oor.

9VI.UH.R2.1C Produced by Danfoss Floor Heating Hydronics 03.2007

Instruction CF-RF Room Thermostat with Infrared Floor Sensor

4. Transmission Test

Initiate transmission test on Room Thermostat

- g. 1

• Press the push button

• LED goes ON

Link test is satisfactory

• LED goes OFF

Link test is unsatisfactory

• LED ashes 5 times

No link connection to RoomThermostat

• Try to relocate Room Thermostat in the room

• Or install Repeater Unit (CF-RU) and locate

between Master Controller and Room

Thermostat

Note: Master Controller output LED(s) connected to the

Room thermostat, ash(es) during link test

5. Mounting

Placing the Room Thermostat - g. 3

• The Room Thermostat should be placed in

accordance with g. 3

IMPORTANT!

Wherever possible, the room thermostat should

be installed at a place where the eect of sunlight,

Indice

Lingue:

Altri manuali Danfoss Termostato

Danfoss

Danfoss DEVIreg 132 Manuale utente

Danfoss

Danfoss RET M Istruzioni operative

Danfoss

Danfoss Icon Master Manuale utente

Danfoss

Danfoss ECL Comfort 310, A361 Manuale utente

Danfoss

Danfoss RAS-D2 Combi Manuale utente

Danfoss

Danfoss TP5001RF Manuale utente

Danfoss

Danfoss BasicPlus2 WT-D Manuale utente

Danfoss

Danfoss RET B-LS Manuale utente

Danfoss

Danfoss GreenCon RC-T2 Manuale utente

Danfoss

Danfoss ECtemp Next Plus Manuale utente

Danfoss

Danfoss RT 115 Manuale utente

Danfoss

Danfoss ECtemp 610 Manuale utente

Danfoss

Danfoss TRONE-RF Manuale utente

Danfoss

Danfoss RET MD Guida alla risoluzione dei problemi

Danfoss

Danfoss 088U0212 Manuale utente

Danfoss

Danfoss Link DBR Manuale utente

Danfoss

Danfoss Link FT Manuale utente

Danfoss

Danfoss ECL Comfort 210 Manuale utente

Danfoss

Danfoss DEVI DEVIreg Touch Manuale utente

Danfoss

Danfoss TS715 Si Manuale utente

Danfoss

Danfoss Icon Master Manuale utente

Danfoss

Danfoss DEVIreg 610 Manuale utente

Danfoss

Danfoss TP5001 series Manuale utente

Danfoss

Danfoss Link FT Manuale utente

Manuali Termostato popolari di altre marche

EWELLY

EWELLY EW-181 Manuale utente

Prolon

Prolon T1100 Istruzioni per l'installazione

Computherm

Computherm Q20 Manuale utente

Heatmiser

Heatmiser neoStat Manuale utente

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuale utente

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuale utente

Saswell

Saswell SAS920XWHB-7-S-RF Guida

Aircalo

Aircalo TFP1-ET85P2 Manuale utente

Honeywell

Honeywell CM721 Manuale utente

Carrier

Carrier DEBONAIR 33CS Manuale utente

Lennox

Lennox iHarmony Zone Thermostat Istruzioni per il montaggio

Gemtech

Gemtech GT7000 Manuale di istruzioni

Rollei

Rollei Smartes 45000 Manuale utente

Sinope

Sinope TH1300RF Manuale utente

Honeywell

Honeywell RLV4305 Manuale utente

Honeywell

Honeywell Prestige 2.0 THX9421 Manuale utente

NuTone

NuTone NTBZ48 Istruzioni operative originali

Stelpro

Stelpro MAESTRO ASMT402AD Manuale utente