Daping DP18-Pro Manuale utente

Users Manual

DP18-Pro

*Please read carefully before using this product*

Buttons description

Flash 1 time, the battery level is 25% or less.

Flash 2 times, the battery level is 50%.

Flash 3 times, the battery level is 75%.

Flash 4 times, the battery level is 100%.

Power Indicator light description

Battery level indication

Note:

If the instruction manual is small and difficult to read the

content, please contact us. We will send you a PDF version

instruction manual.

Power light flashes red: Recording is in progress.

Power light flashes blue: Playing is in progress.

Power light is solid blue: Playback is stopped.

The product's battery level is indicated by the number

of times the recording light flash red after the power button

is turned on.

Method of operation

How to turn on the power and starting recording:

First turn on the power/record button, then start the recording after

the power light flashes red. (Note: This product will automatically

create one recording file every 120 minutes. Please note that when

the SD card is full, the power light will flash purple 10 times and

you can no longer record.(By changing the software, you can set

the power light to stay on or off during recording. Please see "

Common Problems" at the end of the manual.)

How to turn off the power/Save the recording file:

Turn off the power/record button to turn off the power.

Note: If you connect the USB conversion adapter and remote

control during recording, the recording will be saved automatically,

and go to playback mode.)

Play recording/music

Directly play the recording file on the recorder

(1) Connect the product to the USB conversion adapter.

(2) Connect the earphones to the remote control earphone

jack. (As shown below).

(3) After connecting the earphones, turn on the product, and wait

until the power light turns blue. Then press the "Play" button

on the remote control to play the recorded data. (The power

light flash blue).

Stop playback: Press the "Play" button again during playback

to stop playback.

(Note: To save battery, if you stop playback for 20 minutes, the

power will be turned off automatically.)

( By change the software, you can turn the auto power-off function.

If necessary, see " Common Problems " at the end of the manual.)

Directly play music on the voice recorder

(Note: If you pull out the earphone together with the USB conversion

adapter/remote control during playback, the playback will also be

stopped. However, if you do not pull out the USB conversion adapter

and remote control but only the earphones, the playback will not be

stopped.

If you press and hold the "Play" button on the USB conversion

adapter/remote control during stopped playback or during playback,

you can switch to music mode. Press the "Play" button to stop

playing the music. (Hold down the "Play" button also when switching

from music mode to playback mode.)

(When switching modes, the power light will flash red once to

indicate that the mode has been successfully switched.)

Note: Do not put the music files in the folder, put them directly

into the product drive. If you put a music file in the “RECORD” folder,

it will be played as a recording file. Even if you press and hold the

mode/playback button for a long time, the file cannot be recognized

as a music file and will not be played. (As shown below)

Adjust the volume on the voice recorder

Press and hold the "+" button on the remote control during

Press and hold the "-" button to decrease the volume.

(Note: To adjust the volume, you need to press and hold

Select recording on the voice recorder

How to play on PC

(Recommended playback software: Windows system:

Windows Media Player or Quick Time Player, Mac system:

iTunes or vlc media player)

Since it is a recorder with USB interface, it can be directly

connected to the computer by simply removing the USB

protective cover.

playback to increase the volume.

the "+"/"-" button.)

By pressing the "+" / "-" buttons on the remote control, you

can select the playback content from "Previous"/"Next".

(1) Remove the USB protective cap and connect the USB to

the computer. Then open the drive of the product in "My

Computer" on your PC and find the "RECORD" folder.

(2) Save the recording file in it to the desktop of the PC or a

specified folder.

(3) Play the WAV format recording file with playback software

that can support it.

Connect to speakers to play record and music

How to delete recording files

This product can be connected to a speaker for playback.

This is recommended if you want to allow others to hear the

recording.

(1) Please use an audio cable with a 3.5 mm diameter jack.

(sold separately).

(2) Connect the audio cable and the included USB conversion

adapter. You can connect the audio cable to the speaker

and play the product recording and music.

Delete audio files using your computer:

(1) Remove the USB protective cap and plug the device into

the USB port of the computer through the USB interface.

(2) Open the drive of the product in "My Computer" on your

PC and find the "RECORD" folder.

(3) Right-click the file you want to delete in the "RECORD"

folder and delete it.

Delete audio files using the voice recorder:

(1) Combine the adapter/remote control and earphones,

connect them to the voice recorder.

(2) Turn on the voice recorder and wait about 5 seconds

until only the playback light lights up blue, and use the

" + " and "-" buttons on the remote control to find the

recording da ta you want to delete. When you find it,

press the "Play" button on the remote control to stop

playback, and press and hold the "+" for 3 seconds, it

OTG function

This product has an OTG function, so if you have an OTG

con versi on adap ter (so ld separately), you can direct ly

playback/delete the recorded content with an OTG compatible

smartphone.

How to use OTG conversion adapter

(1) Connect the USB side of the OTG conversion adapter

to your smartphone.

will switch to the delete mode and the power light up

blue and red simultaneously.

(3) Press the "Play" button to delete the recorded data. At

that time, note that the blue and red power lights flash

alternately and the recorded data will be deleted. (You

can exit the delete mode by pressing the "-" button on

the remote control.)

(Note: Delete mode time is about 5 seconds. If you do

not delete the recorded data without pressing the "Play"

button within 5 seconds, it will return to the playback mode.

It is possible to delete the recorded data that you do not want

to delete by mistake, so we recommend you to delete the

important recorded data using your computer.)

Please note:

(1) The OTG function is applied only to Android smartphones.

(2) It is necessary for your smartphone to support OTG.

(3) The type of OTG conversion adapter is also different,

so please purchase it using the USB port of your smartphone.

(For details, please contact the vendor of the OTG conversion

adapter.)

Charging method

Time synchronization setting

(2) Connect the OTG conversion adapter and voice recorder

with the accessory USB cable.

(3) On the settings of the smartphone, find the voice recorder

drive in the storage, and open it. (It's different to find a voice

recorder drive depending on the smartphones. If you cannot

find this file, please contact your smartphone customer service.

Note: To play on smartphones, you need to install an app

that can support the WAV format. (Recommended playback

software: Poweramp).

Please connect to the USB port of the main body with the

supplied USB cable. You can charge it by connecting the

included USB cable to the power supply (PC, AC adapter,

mobile battery).

Note: Please charge with DC5V ==1A power supply.

Charge status: The power light flashes blue during charging.

When fully charged, the power light up to red and blue simultaneously.

Low battery indicator: When the battery is low, the power

light will flash red and blue 10 times. After that, the power turns off.

Recording while charging: When recording while charging,

the red and blue lights flash alternately.

After connecting the product to your PC, open the product

drive in "My Computer". Then open the "Settime" folder. Finally,

you can synchronize the time with your PC by clicking the

「SetUDiskTime(9X).exe」file.

Indice

Altri manuali Daping Registratore vocale

Daping

Daping DP16-Pro Manuale utente

Manuali Registratore vocale popolari di altre marche

Sony

Sony ICD-UX533F Manuale utente

RCA

RCA VR5230 Manuale utente

Ramsey Electronics

Ramsey Electronics BULLSHOOTER ENDLESS LOOP BS2C Guida utente

Sony

Sony TCM-400DV Manuale utente

LogTag

LogTag TREL30-16 Manuale utente

SVAT

SVAT CVP800 Manuale utente

Marantz

Marantz PMD620 Manuale utente

Zoom

Zoom H4next Manuale utente

Roland

Roland BR-900CD Manuale utente

JVC

JVC ProHD GY-HMZ1U Manuale operativo e di manutenzione

Panasonic

Panasonic PQT8531-P Manuale utente

Sanyo

Sanyo TRC-6400 Manuale utente

Tascam

Tascam DR-07 Manuale utente

Olympus

Olympus DW-90 Manuale utente

Sanyo

Sanyo ICR-B150 Manuale utente

Korg

Korg D4 Manuale utente

Sony

Sony ICD-SX46 - Ic Recorder Manuale utente

Olympus

Olympus DIGITAL VOICE RECORDER WS-200S Istruzioni per il montaggio