Darkly Labs Emblaser Core Manuale utente
Emblaser
-User Manual-
Revision 6.0
IMPORTANT
Read this manual carefully and save it for future reference.
The Emblaser is a cost eecve laser cung and engraving kit for the general hobbyist and maker. The
Emblaser is not designed for use in applicaons such as volume manufacturing.
Water and electricity are a dangerous combinaon. Do not use the Emblaser in wet surroundings
Always follow the recommended safety procedures outlined in this manual.
This includes, but is not limited to:
Always wearing appropriate safety eye-ware when operang the Emblaser.
Always ensuring your work material is safe to use in the Emblaser.
Always following the Safety Check List supplied.
Never use the Emblaser on reecve materials.
Ensure the Emblaser is not used in the vicinity of combusble materials.
The Emblaser is not intended to be used by persons (including children) with reduced physical, sensory or
mental capabilies, unless they have been given supervision or instrucon concerning use of the Emblaser
by a person responsible for their safety.
And/or
Children should be supervised to ensure that they do not play with the Emblaser.
The Emblaser is not intended for children under the age of 15 years. Teenagers aged between 15 and 18
years can use the Emblaser with the consent and/or assistance of their parents or persons who have
Parental authority over them.
Operaon of the Emblaser without the baseplate aached or any other modicaons that reduce
beam containment or safety interlock funcons inherent to the design place the user and bystanders at
increased risk of beam exposure and injury.
Never subject the Emblaser to heavy shocks and do not shake or drop.
Never leave the Emblaser unaended when it is switched on.
Always switch o the Emblaser aer use.
Never operate the Emblaser with the base plate removed.
All informaon in this Manual is subject to change at any me without noce and is provided for convenience purposes only.
Darkly Labs reserves the right to modify or revise the Manual in its sole discreon and at any me. You agree to be bound by
any modicaons and/or revisions. Contact the Darkly Labs support team for up-to-date informaon.
1
5
11
PAGE iv
USER MANUAL Darkly Labs
PAGE 1
USER MANUAL Darkly Labs
PAGE 2
USER MANUAL Darkly Labs
A4 A3
490mm x 440mm
[19.3” x 17.3”]
630mm x 520mm
[24.8” x 20.5”]
305mm x 210mm
[12” x 8.27”]
410mm x 285mm
[16.5” x 11.22”]
45mm [1.77”] 45mm [1.77”]
7kg 8kg
Ambient Operaon 10-32 C
[50-90 F]
AC input
DC output
100-240V, 50-60Hz
12V @ 3amps
Chassis Material
Stepper Motors
Resoluon
Polycarbonate / ABS / PLA
0.9degree step angle
0.08mm / step
9mm 445 nm laser diode (Class 4)
Or
5.6mm 445 nm laser diode (Class 4)
Vectric Cut2D-Laser Desktop 8
Vectric Transfer (VTransfer)
Ulmate GCode Sender
GRBL 9g (custom)
PAGE 3
USER MANUAL Darkly Labs
FRONT
REAR
Control Panel
Laser Carriage
Laser Module
LASERPOWER
LASERPOWER
Power Indicator LED Laser Indicator LED
Laser Enable ButtonPower Button
Fan
Fan Shroud
Heatsink
Lens
Laser Shroud
SIDE
PAGE 4
USER MANUAL Darkly Labs
PAGE 5
USER MANUAL Darkly Labs
PAGE 6
USER MANUAL Darkly Labs
The informaon outlined in this safety chapter are not intended to replace any exisng naonal or
internaonal standards as well as naonal or local Occupaonal Health and Safety (OH&S) regulaons.
These specic responsibilies should be followed. However, in the absence of any specic legislaon or
regulaons, the following constutes general guidance on responsibilies for the safe use of lasers.
It is crucial that a competant adult is always in charge of the Emblaser and its operaon. This individual
is responsible for providing laser safety training to users and for ensuring that safe methods of work are
always adhered to by users of the Emblaser.
Any potenal laser user should ensure that appropriate procedures are followed. This is cannot be reinforced
enough, not only to prevent possible irreversible injury to the laser user, but to protect visitors or others
who may inadvertently become exposed to any of the hazards of the laser equipment.
Users are encouraged to refer to the references for addional resources and are strongly encouraged to
conrm that they are in compliance with all local OH&S requirements.
Watch out for the following symbols to indicate specic laser precauons.
Altri manuali per Emblaser Core
1
Indice
Altri manuali Darkly Labs Taglierina
