Video-IN
Multiconn Srl
4
The CIC unit rear side view (fig.10)
10
9.1
Insert the 2 female crimped pins of DAS cable (fig.9.1 DCABMQS-RCA) inside the
black 12P housing and then in white Fakra cover.
If the connectors are already available in the unit, just connect the pins in the pin-
out position recommended below.
Insert the wire with label +in pin 2 (positive signal).
Insert the wire with label -inside the pin 12 (negative signal).
If the pin 2 and 12 are already used by the rear camera, disconnect them and
connect to a yellow RCA to video-IN 1 on DAS receiver.
To shift automatically the signal from TV to REAR CAMERA, connect the green
wire of the power supply cable (refer to the DAS user manual) directly to the rear
camera installed inside the vehicle.
BMW –CIC system PLATFORM F
