Dasan DW-780 Manuale utente
LIST OF DECT Base Station
1.
DW-780
2.
DW-780U
3.
DW-780B
4.
DW-780UB
5.
DW-780BT
6.
HB-780
7.
HB-780B
8.
HB-780U
9.
HB-780BU
10.
X450
11.
X450U
12.
X450UB
13.
X450BT
14.
GG-900
User’s Manual
DECT Base Station
All the models have the same identical in interior structure, electrical
circuits and components
INTRODUCTION
Base & Headset Telephone cord Power Adapter
Optional Accessories
BusyLight DL-570 Lifter USB Cable Electronic Hook
Switch (EHS)
What’s included
Refer to the
EHS Guide
Attaching the headband
- Fit the headband on the headset and the microphone boom arm will then rotate to
your required position.
Positioning the Microphone
Holding the headset, rotate the headband to bring the boom close to your mouth.
The ideal placement for the microphone is usually at the corner of your mouth, not in
front of it, and about an inch from your face. Be sure that the side of the microphone is
pointed toward your mouth.
To change the speaker volume: tilt the volume switch towards the ‘plus’ sign to increase
the volume and tilt the switch towards the ‘minus’ sign to decrease the volume and
press the switch to activate the microphone mute mode.
Base Unit (Front & Left side)
Bluetooth PC/TEL
Bluetooth Button This function works for DW-780B and DW-780UB model.
PC/TEL Selection This function works for DW-780U and DW-780 UB model.
Microphone Mute Button Touch to mute the call
Microphone Volume When connected, you can adjust the volume level for the
best microphone volume.
Compatibility Switch Select ‘1’ or’2’ until a dial tone is heard via the telephone
connection
USB Port This is for PC connection through the USB cable
External Ring On/Off This is external ring alert for incoming call when you use
softphones. (It only works with PC mode.)
Microphone
Volume
Bluetooth PC/TEL
Connection
Microphone
Mute
External
Ring
On/Off
USB port
Compatibility
switch
Base Unit(Back side)
BusyLight Jack Connect BusyLight plug to the jack(optional extra)
DC Jack Connect Power Adapter to DC Jack
AUX port Connection for Handset Lifter or EHSAdapter(optional extra)
Telephone Port Connect telephone cord to the headset port or handset port
Handset Port Plug Handset cord from the phone to Handset port
Handset port
BusyLight
Jack
AUX port
Telephone port
DC Jack
Visual Indicator
Charging Status LED status (Headset) Visual Window(Base)
Charging Red LED: ‘ON’White
Full Charged Blue LED: ‘ON’White
Low Battery Blinking in White
Incoming Call Blinking in Green
Event LED status
Press Microphone mute Mute indicator : ‘ON’
Press PC/TEL selection PC/TEL Indicator -TEL : ‘OFF’PC : ‘ON’
Bluetooth Connection Pairing mode : Blinking
Connected : ‘ON’Disconnected : ‘OFF’
Hook Off BASE : Transparent Window Green
Headset : Blue LED is blinking twice in every 3 sec
Visual Window
Bluetooth PC/TEL Microphone
Button Button Mute button
Audio Indicator
Event Sound Effect
Speaker /Microphone volume Beep Sound ‘UP’ - High tone,’DOWN’ – Low Tone
Max/Min Speaker volume Double beep
Max/Min microphone volume Double beep
Microphone mute/unmute Mute : beep Unmute : Double beep
Mute reminder Beep in every 5 sec
Hook Off / On Hook Off : Double beep(High tone),
Hook On : Double beep(Low tone)
Setting up the Base
Desk Phone with Headset Port
- Plug the supplied telephone cord into
the TEL port of the BASE Unit
- Connect the telephone cord to the
HEADSET port of the desk phone
Desk Phone without Headset Port
- On the desk phone, unplug the
handset cable from the phone
- Plug the handset cable into the
HANDSET port on the BASE
- Plug the telephone cord into the TEL
port on the BASE unit and plug
the other end of the telephone cord
into the HANDSET port on the desk
phone
Additional Accessories
DL-570 LIFTER
The DL-570 LIFTER remotely lifts the desk phone handset
To make or answer a call.
Electronic Hook Switch (EHS) Adapter
EHS Adapter enables an incoming call to be answered or ended by using the On/Off
EHS is only compatible with certain telephone systems. In order to determine which
telephones are compatible with the EHS feature, please refer to EHS guide or
contact your local distributor. Please also refer to your telephone’s user manual for
clarification.
Operating Instructions
- Plug the Power Adapter DC Jack into the back of the Base Unit.(See Note 1 below)
- Press the Hook On/Off switch to make a call
- Select compatibility switch ‘1’ or ‘2’ position until you can hear the dial tone
- Adjust speaker and microphone volume to suit your requirement
- Press the Hook On/Off switch to end a call
Note 1 : Factory default setup : Pairing
- Place the headset on the cradle
- Plug the power adapter into the base unit (Pairing process is automatically
proceeding): Tel indicator is blinking.
- Press the ‘mute button’ of the headset until LED of the headset is blinking.
- If pairing is completed, you can hear beep sound and LEDs of base and headset will
be off.
Connecting To a PC
Plug the USB cable to the port on the left side of base unit.
Connect the USB cable to any free USB port on the PC.
DW-780 is optimized for Skype for Business and supports Skype, Broadsoft UC-Client,
Avaya One-X agent, One-X Communicator, Cisco Jabber, Bria(X-Lite), Mitel Micollab
and 3CX softphones with SoftLink
Note : SoftLink is a PC software enabling USB devices to have Remote Call
Control over various softphones.
Questo manuale è adatto per i seguenti modelli
13
Indice
