Datalogic BC9030 Manuale utente

BC9030 BT Presentation Base

Quick Reference Guide

Datalogic USA, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

this documentation may be reproduced, stored in or introduced into a retrieval

system, or transmitted in any form or by any means, or for any purpose, with-

out the express written permission of Datalogic S.p.A. and/or its affiliates.

Owners of Datalogic products are hereby granted a non-exclusive, revocable

license to reproduce and transmit this documentation for the purchaser's own

internal business purposes. Purchaser shall not remove or alter any propri-

etary notices, including copyright notices, contained in this documentation and

shall ensure that all notices appear on any reproductions of the documenta-

tion.

Should future revisions of this manual be published, you can acquire printed

versions by contacting your Datalogic representative. Electronic versions may

either be downloadable from the Datalogic website (www.datalogic.com) or

provided on appropriate media. If you visit our website and would like to make

comments or suggestions about this or other Datalogic publications, please let

us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this man-

ual that is complete and accurate, however, Datalogic reserves the right to

change any specification at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A.

in many countries, including the U.S. and the E.U. PowerScan is a trademark of

Datalogic S.p.A. and/or its affiliates, registered in many countries, including

the U.S. and the E.U. The Bluetooth word mark and logos are owned by Blue-

tooth SIG, Inc. and any use of such marks by Datalogic Group companies is

under license. All other brand and product names may be trademarks of their

respective owners.

Patents

See www.patents.datalogic.com for patent list.

See the Regulatory Addendum included with your

product for additional regulatory, safety and legal

information.

Table of Contents

Using the BC9030 BT Presentation Base ..................................................... 1

Installation ....................................................................................................... 2

Regulating the Cradle Position .............................................................. 2

Mounting with the Metal Plate ............................................................. 4

System Connections ....................................................................................... 5

Connecting and Disconnecting the Interface Cable ............................ 5

BC9030-BT-BP Configuration ........................................................................ 6

Datalogic Aladdin™ .................................................................................. 6

Serial Configuration ................................................................................ 7

Configuration Bar Codes ........................................................................ 7

Resetting Standard Product Defaults .................................................. 7

Selecting the Interface Type .......................................................................... 8

Configuring the Interface ............................................................... 8

Keyboard Interface ....................................................................... 10

Scancode Tables............................................................................ 11

Country Mode ........................................................................................ 12

Caps Lock State ..................................................................................... 16

Numlock ................................................................................................. 17

Technical Features ........................................................................................ 18

Datalogic Limited Factory Warranty ........................................................... 20

Ergonomic Recommendations .................................................................... 21

Support Through the Website ..................................................................... 22

Quick Reference Guide

Using the BC9030 BT Presentation Base

The BC9030 BT Presentation Base, when paired with one or more PowerScan™

PM9500 readers, builds a Cordless Reading System for the collection, decod-

ing and transmission of bar code data. It can be connected to a Host PC via

RS-232, USB, or KBD Wedge, and is suited for single-cradle layouts.

The label on the cradle contains LED indicators and a multi-function button.

The LEDs signal the BC9030-BT-BP

status, as shown.

LED STATUS

Aux Yellow On = BC9030-BT-BP is powered through an external

power supply.

Host Yellow On = BC9030-BT-BP is powered by the Host.

Reader

Green On = the reader battery is completely charged.

Red On = the reader battery is charging.

Orange Blinking = reader battery fault - replace battery.

Red / Green Alternatively Blinking = charging error - see PRG.

Off = reader not in the cradle or not properly inserted.

Radio Yellow Blinking = radio activity.

Installation

2BC 9xx0-BT Cradle

Installation

To set up your BC9030-BT-BP cradle you must:

1. Physically install the cradle.

2. Make all system connections.

3. Configure the BC9030-BT-BP cradle.

The cradle package contains the following items:

Regulating the Cradle Position

To regulate the position, use the hex key to unscrew the holder and slide it to

the desired position.

• BC9030 BT Presentation Base • Hex Key

• BC9030-BT-BP Quick Reference Guide

(this manual) • Rubber Spacers

• Metal Mounting Plate

Installation

Quick Reference Guide 3

The rubber spacers included in the box can be used to fix the position of the

cradle:

Installation

4BC 9xx0-BT Cradle

Mounting with the Metal Plate

1. Affix the metal plate onto the desired mounting surface using the

two center screw holes (see Figure 1 on page 4).

2. Slide the tabs on the back of the cradle onto the metal plate as

shown in Figure 1.

3. After aligning the tabs, push up to lock into place.

Figure 1. Mounting Plate on Wall

System Connections

Quick Reference Guide 5

System Connections

The BC9030-BT-BP cradle provides a multi-interface connector and a power

supply connector as shown:

Connecting and Disconnecting the Interface Cable

The BC9030-BT-BP can be connected to a Host by means of a multi-interface

cable, which must be simply plugged into the Host connector, visible on the

front panel of the cradle.

To disconnect the cable, insert a paper clip or other similar object into the hole

corresponding to the Host connector on the body of the cradle. Push down on

the clip while unplugging the cable. Refer to the following figure:

CAUTION

Connections should always be made with power off!

Power Supply

Multi-Interface

Connector

Connecting/Disconnecting the Cable

BC9030-BT-BP Configuration

6BC 9xx0-BT Cradle

RS-232

USB

BC9030-BT-BP Configuration

The BC9030-BT-BP configuration can be performed in three ways: by using

the Datalogic Aladdin™software configuration program, by sending configura-

tion strings from the Host PC via the RS-232 or USB-COM interface or by

reading configuration bar codes with the PowerScan™ PM9500 reader.

Datalogic Aladdin™

Datalogic Aladdin™is a multi-platform utility program that provides a quick

and user-friendly configuration method via the RS-232/USB-COM interface.

It also allows upgrading the software of the connected device (see the Data-

logic Aladdin™ Help On-Line for more details).

NOTE

The power supply is required only if you need to connect the interface

cable to a standard USB Port. The power supply is not required if you

connect the interface cable to a PoweredUSB 12V or 24V port.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Datalogic Accessori

Datalogic

Datalogic TL50 Series Manuale utente

Datalogic

Datalogic SG4-RB2-050-OO-W Manuale utente

Datalogic

Datalogic DS2 Ethernet Manuale utente

Datalogic

Datalogic S8-MR M Series Manuale utente

Datalogic

Datalogic C-BOX 300 Manuale utente

Datalogic

Datalogic Smart-VS Manuale di installazione e funzionamento

Datalogic

Datalogic S5N-PA W Series Manuale utente

Datalogic

Datalogic BC9180-STAR Manuale utente

Datalogic

Datalogic S70 Manuale utente

Datalogic

Datalogic BC9XX0-BT Manuale utente

Datalogic

Datalogic BC9xx0-STAR Manuale utente

Datalogic

Datalogic Smart-VS WebApp Manuale utente

Datalogic

Datalogic S5N-PA Manuale utente

Datalogic

Datalogic PowerScan BC9600 Series Manuale utente

Datalogic

Datalogic DS2 Ethernet Manuale utente

Datalogic

Datalogic S62 Series Manuale utente

Datalogic

Datalogic S8-PH M53 Series Manuale utente

Datalogic

Datalogic IO-Link S100 Series Manuale utente

Datalogic

Datalogic IO-Link S5N-P Series Manuale utente

Datalogic

Datalogic BASIC HOLDER Manuale tecnico

Datalogic

Datalogic STARGATE RF910MHz Guida rapida

Datalogic

Datalogic S80-MH-5-YL09 Manuale utente

Datalogic

Datalogic S5N-PA Manuale utente

Datalogic

Datalogic VS-CRX Manuale di installazione e funzionamento

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente