Datalogic Controller SC6000 Manuale utente

SC6000
Reference Manual


SC6000
REFERENCE MANUAL

DATALOGIC S.p.A.
Via Candini 2
40012 - Lippo di Calderara di Reno
Bologna - Italy
SC6000 Reference Manual
Ed.: 10/2005
ALL RIGHTS RESERVED
Datalogic reserves the right to make modifications or improvements without prior notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for
incidental or consequential damages resulting from the use of this material.
Product names mentioned herein are for identification purposes only and may be trademarks and or
registered trademarks of their respective companies.
© Datalogic S.p.A. 2003 - 2005
07/10/2005

CONTENTS
REFERENCES ............................................................................................................. v
Reference Documentation ............................................................................................ v
Services and Support ................................................................................................... v
SAFETY REGULATIONS ........................................................................................... vi
Power Supply............................................................................................................... vi
WEEE Compliance ...................................................................................................... vi
GENERAL VIEW ........................................................................................................ vii
GUIDE TO INSTALLATION ........................................................................................ix
1INTRODUCTION ..........................................................................................................1
1.1 Product Description ......................................................................................................1
1.2 Model Description.........................................................................................................1
1.3 LED Indicators ..............................................................................................................2
1.4 Accessories ..................................................................................................................3
2INSTALLATION ........................................................................................................... 4
2.1 Package Contents ........................................................................................................4
2.2 Overall Dimensions.......................................................................................................5
2.3 Mechanical Mounting....................................................................................................6
2.4 Electrical Connections ..................................................................................................8
2.4.1 Auxiliary Interface .........................................................................................................8
2.4.2 Ethernet Connector.......................................................................................................9
2.4.3 DeviceNet Connector..................................................................................................11
2.4.4 Profibus Connector.....................................................................................................12
2.5 Typical Layouts...........................................................................................................13
2.5.1 Standard Layout .........................................................................................................13
2.5.2 Fieldbus Network ........................................................................................................14
2.6 Keypad and Display....................................................................................................15
2.6.1 Standard Mode ...........................................................................................................15
2.6.2 Menu Mode.................................................................................................................16
3SOFTWARE CONFIGURATION................................................................................ 17
3.1 Genius™ Installation...................................................................................................17
3.2 Guide to Rapid Configuration for DS6000, DS8100A and DX8200A Slave Scanners17
3.2.1 Genius™ Network Setup Through Master..................................................................19
3.2.2 Alternative Slave Address Assignment.......................................................................23
3.3 Guide to Rapid Configuration for DS8100 and DX8200 Slave Scanners ...................23
3.4 Parameter Default Values...........................................................................................27
4MAINTENANCE ......................................................................................................... 31
4.1 Datalogic Automatic Replacement Procedure (DARPTM)...........................................31
5TROUBLESHOOTING ............................................................................................... 33
6TECHNICAL FEATURES........................................................................................... 35
AALTERNATIVE CONNECTIONS REFERENCE........................................................36
Power Supply - I/O (Power/Net Connector)................................................................ 36
iii

Main Interface.............................................................................................................39
Extended I/O...............................................................................................................41
Modem........................................................................................................................44
GLOSSARY................................................................................................................45
INDEX......................................................................................................................... 47
iv

REFERENCES
REFERENCE DOCUMENTATION
The documentation related to the SC6000 is listed below:
• PWO power supply unit
• Document about the Ethernet connectivity
• Document about the Profibus connectivity
• Guide to Installing a Redundant System
• Replacing an SC8000 Controller
• Help On-Line in PDF format
SERVICES AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on
to www.datalogic.com and click on the links indicated for further information including:
• PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities
• SERVICES & SUPPORT
- Datalogic Services - Warranty Extensions and Maintenance Agreements
- Authorised Repair Centres
• CONTACT US
E-mail form and listing of Datalogic Subsidiaries
v

SAFETY REGULATIONS
POWER SUPPLY
- This product is intended to be installed by Qualified Personnel only.
WEEE COMPLIANCE
vi

GENERAL VIEW
SC6000 Controller
2
4
5
6
1
3
Figure 1 - General View
Connector Panel
Power On and Communication LEDs
Connector Panel Legend
1
3
2
LCD Display
Programming Keypad
Status LEDs
4
6
5
vii

4
2 3
1
6
5
Figure 2 - SC6000-1200 Standard Model Connector Panel
Modem Connector
1
Power/Net Connector
2
Main Interface Connector
3
Ethernet Connector
4
Auxiliary Interface Connector
5
Extended I/O Connector
6
1
Figure 3 - SC6000-1211 Profibus Model Connector Panel
Profibus Connector
1
1
Figure 4 - SC6000-1215 DeviceNet Model Connector Panel
DeviceNet Connector
1
1
Figure 5 - SC6000-1230 Dual Ethernet Model Connector Panel
Ethernet Connector
1
viii
Altri manuali per Controller SC6000
4
Indice
Altri manuali Datalogic Controllori

Datalogic
Datalogic Controller SC6000 Manuale utente

Datalogic
Datalogic DX8200 Manuale utente

Datalogic
Datalogic VS Series Manuale utente

Datalogic
Datalogic Controller SC6000 Manuale utente

Datalogic
Datalogic COBALT C0405-USB-01 Manuale utente

Datalogic
Datalogic Controller SC6000 Manuale utente

Datalogic
Datalogic SC4000 Manuale utente

Datalogic
Datalogic HF-CNTL-IND-02 Manuale utente

















