Datalogic Dragon Manuale utente
DRAGON™
Reference Manual
90ACC1855
DLL6000-R/OM6010-R Compatibility
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20
DRAGON™
REFERENCE MANUAL
DLL6000-R/OM6010-R COMPATIBILITY
DATALOGIC S.p.A.
Via Candini 2
40012 - Lippo di Calderara di Reno
Bologna - Italy
DRAGON™ REFERENCE MANUAL
DLL6010-R/OM6010-R Compatibility
Ed.: 10/2002
This manual refers to
compatibility with DLL6010-R/OM6010-R
software version: SW 1.08
ALL RIGHTS RESERVED
Datalogic reserves the right to make modifications and improvements without prior notification.
Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or
consequential damages resulting from the use of this material.
Product names mentioned herein are for identification purposes only and may be trademarks and or registered
trademarks of their respective companies.
© Datalogic S.p.A. 2002
Rev. A
iii
CONTENTS
HOW TO USE THIS MANUAL ......................................................... vi
1
INITIAL SETUP.................................................................................. 1
1.1
Set Compatibility................................................................................. 1
1.2
DLL6000-R/OM6010-R Compatibility SetUp...................................... 2
1.2.1
Using Multiple Guns With Same Cradle............................................. 5
1.2.2
Gun Default Configuration.................................................................. 6
1.2.3
Cradle Default Settings ...................................................................... 7
2
CONFIGURATION ............................................................................. 8
RS232 PARAMETERS..................................................................... 10
WEDGE PARAMETERS.................................................................. 14
PEN EMULATION PARAMETERS .................................................. 19
CRADLE OPERATING PARAMETERS........................................... 23
BATTERY CHARGING .................................................................... 26
NETWORK PARAMETERS ............................................................. 28
GUN OPERATING PARAMETERS ................................................. 31
READING PARAMETERS ............................................................... 35
DECODING PARAMETERS ............................................................ 39
GUN DISPLAY PARAMETERS ....................................................... 42
CODE SELECTION.......................................................................... 45
3
REFERENCES................................................................................. 55
3.1
RS232 Parameters........................................................................... 55
3.1.1
Handshaking .................................................................................... 55
3.1.2
Radio RX Lock ................................................................................. 55
3.1.3
RX Timeout ...................................................................................... 56
3.2
Wedge Parameters .......................................................................... 56
3.2.1
IBM AT - Alt Mode Interface............................................................. 56
3.2.2
Inter-character Delay........................................................................ 56
3.3
Pen EMULATION Parameters ......................................................... 57
3.3.1
Minimum Output Pulse ..................................................................... 57
3.3.2
Overflow ........................................................................................... 57
3.3.3
Output and Idle Levels ..................................................................... 58
3.4
Cradle and Gun Operating Parameters ........................................... 58
3.4.1
ACK from Host ................................................................................. 58
3.4.2
Radio Timeout .................................................................................. 59
iv
3.4.3
Output Data Format..........................................................................59
Header/Terminator Selection.........................................................60
Gun/Cradle Address Stamping......................................................61
Gun/Cradle Address Delimiter.......................................................61
Time Stamping Format ..................................................................61
Time Stamping Delimiter ...............................................................61
Code Identifier ...............................................................................62
3.5
Reading Parameters ........................................................................ 62
3.5.1
Trigger Signal ................................................................................... 62
3.5.2
Trigger Timeout................................................................................ 63
3.5.3
Reads per Cycle ............................................................................... 63
3.5.4
Safety Time ...................................................................................... 63
3.5.5
Single-Store...................................................................................... 63
3.5.6
Power-Off Timeout ........................................................................... 64
3.6
Decoding Parameters....................................................................... 64
3.6.1
Ink-Spread........................................................................................ 64
3.6.2
Overflow Control............................................................................... 65
3.6.3
Interdigit Control ............................................................................... 65
3.7
GUN Display Parameters ................................................................. 65
3.7.1
Display Mode.................................................................................... 65
3.8
Software Release ............................................................................. 66
4
COMMUNICATION AND MESSAGE FORMATTING.......................... 67
4.1
Messages from Host to Gun ............................................................ 67
4.1.1
Cursor Control .................................................................................. 68
4.1.2
Font Selection .................................................................................. 69
4.1.3
Clearing Display ............................................................................... 69
4.1.4
LED and Beeper Control ..................................................................70
4.1.5
Setting RTC...................................................................................... 70
4.2
Messages from Gun Command Keys .............................................. 71
A HOST CONFIGURATION STRINGS............................................... 73
B C6010 CONFIGURATION ............................................................... 82
C HEX AND NUMERIC TABLE........................................................... 83
v
HOW TO USE THIS MANUAL
This volume was written for the sole purpose of providing complete
configuration for DRAGON™ M readers and OM-DRAGON™ cradles used
as DLL6000-R/OM6010-R compatible readers and cradles for existing
DLL6000-R/OM6010-R applications.
If you are not using these products as DLL6000-R/OM6010-R
compatible readers/cradles, then use the Standard Reference Manual
for configuration.
Your DRAGON™ M/OM-DRAGON™ is supplied with its own Quick
Reference Manual which provides connection diagrams, reading diagrams,
basic application parameter settings, default values, and specific technical
features. You can use either your reader's Quick Reference Manual or this
Manual for initial configuration in order to set the default values and select
the interface for your application.
This manual can be used for complete setup and configuration of your
DRAGON™ M reader and OM-DRAGON™ cradle as DLL6000-R/OM6010-R
compatible products.
To use this manual for initial setup see chapter 1.
If you wish to change the default settings, this manual provides complete
configuration of your reader in an easy way.
To configure your reader:
1) Open the folded page in Appendix C with the hex-numeric table and
keep it open during the device configuration.
2) Read the Enter Configuration code ONCE, available at the top of
each page of configuration.
3) Modify the desired parameters in one or more sections following the
procedures given for each group.
4) Read the Exit and Save Configuration code ONCE, available at the
top of each page of configuration.
vi
Reference notes describing the operation of the more complex parameters
are given in chapter 3.
For communication between Host and gun, refer to chapter 4.
DL Sm@rtSet
DL Sm@rtSet is a Windows-based utility program providing a quick and
user-friendly configuration method via the RS232 interface.
It also allows upgrading the software of the connected device (see the DL
Sm@rtSet User's Manual for more details).
Sending Configuration Strings from Host
An alternative configuration method is provided in Appendix A using the
RS232 interface. This method is particularly useful when many devices need
to be configured with the same settings. Batch files containing the desired
parameter settings can be prepared to configure devices quickly and easily.
INITIAL SETUP
1
1
1 INITIAL SETUP
To start the system up, perform the operations represented in the flow-chart
below, following the given sequence.
Begin Setup by reading the Set
Compatibility code in par. 1.1
Follow the Compatibility Setup
procedure in par. 1.2
The system is ready to operate
according to the DLL6000-R/OM6010-R
default configurations
1.1 SET COMPATIBILITY
Set DLL6000-R compatibility
i#:+k
i#:+k
i#:+k
The reader will automatically be switched off and restarted and four high
tones will be emitted.
At this point, the DRAGON™ M scanner is ready to be configured using the
DLL6000-R procedure in par. 1.2.
To restore the DRAGON™ M standard configuration read the following code,
then follow the DRAGON™ M configuration procedure.
Restore DRAGON™ M standard configuration
i#:&k
i#:&k
i#:&k
DLL6000-R/OM6010-R COMPATIBILITY
2
1
1.2 DLL6000-R/OM6010-R COMPATIBILITY SETUP
When the cradle is connected and powered, configure the gun by reading the
following codes in the given sequence and follow the instructions.
Note: Open the folded page at the end of this Manual for the Numeric code
selections.
Restore DLL6000-R default
1. GcCgCmCgCjGgGjCgCgCgCjGgGgCjCgCjMcCcGjJcCcG
Default parameter settings are listed in par. 1.2.2.
Enter configuration
2. GcCgCmCgCjGgGjCgCgJcGgCgGjJcCcG
Set Date
3.
GcCgCmGjCcCjCjGcCjCcGgJgGjJcCcG
+
six digits for Day, Month and Year (DDMMYY).
Set Time
4.
GcCgCmGjCcCjCcGjCjGgCjCgGjJcCcG
+
four digits for Hours and Minutes (HHMM).
Set Gun Address
5.
GcCgCmGjCcCjCjGjCcCgGgJcGjJcCcG
+
three digits for the DLL6000-R Address (from 000 to 126).
All guns used in the same area must have different addresses.
Altri manuali per Dragon
1
Indice
Altri manuali Datalogic Registratore di dati
