Datalogic Jade X7 Manuale utente

Jade™ X7

Portal Scanner

Quick Reference Guide

Datalogic USA, Inc.

959 Terry Street

Eugene, OR 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

or the procedures described therein may be reproduced or transmitted in any form or by

any means without prior written permission of Datalogic S.p.A. and/or its affiliates ("Data-

logic" or "Datalogic USA, Inc.”). Owners of Datalogic products are hereby granted a non-

exclusive, revocable license to reproduce and transmit this documentation for the pur-

chaser's own internal business purposes. Purchaser shall not remove or alter any propri-

etary notices, including copyright notices, contained in this documentation and shall

ensure that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by

contacting your Datalogic representative. Electronic versions may either be downloadable

from the Datalogic website (www.datalogic.com) or provided on appropriate media. If you

visit our website and would like to make comments or suggestions about this or other

Datalogic publications, please let us know via the "Contact Datalogic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is

complete and accurate, however, Datalogic reserves the right to change any specification

at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many

countries, including the U.S. and the E.U. All other brand and product names may be trade-

marks of their respective owners.

Jade is a trademark of Datalogic S.p.A. or of Datalogic Group companies, registered in many

countries, including the U.S. and the E.U.

Patents

See www.patents.datalogic.com for patent list.

See the Regulatory Addendum included with your

product for additional regulatory, safety and legal

information.

Quick Reference Guide

Table of Contents

JADE™ X7................................................................................................................................................... 1

Introduction ....................................................................................................................................................1

Box Contents ............................................................................................................................................1

Scanner Features .....................................................................................................................................2

Operation .........................................................................................................................................................3

Power-on ..................................................................................................................................................3

Scanning ...................................................................................................................................................4

Control Panel ............................................................................................................................................4

Maintenance ...................................................................................................................................................5

Cleaning ....................................................................................................................................................5

Spillage ......................................................................................................................................................6

Debris Tray/Window ........................................................................................................................6

LED and Audio Indicators ..............................................................................................................................7

Arch Indicators .........................................................................................................................................7

Audio Indicators .......................................................................................................................................8

Datalogic USA, Inc. Limited Factory Warranty ............................................................................................9

Contents

ii Jade™ X7 Portal Scanner

NOTES

Quick Reference Guide 1

Jade™ X7

Introduction

This Quick Reference Manual explains the basic features and functions of the portal scanner.

NOTE

Box Contents

When the pallet contents are opened, the three large boxes should contain one each of the major

assemblies shown below and on the next page.

Figure 1 . Major Assemblies

Entry Arch

Exit Arch

Lower Assembly —

The System Control Box and

Bottom Scanner are shipped

fully assembled inside the

Common Mounting Struc-

ture

System Control Box Bottom Scanner

Common Mounting Structure

Product Flow

-OR-

The installer will need to reference the Product Reference Guide (PRG, available for viewing & download

at the Datalogic website) for information about site preparation, grounding, feature configuration, trou-

bleshooting, calibration and all other topics involved in installing the scanning system.

This manual covers more than one model of the Jade X7 product. Your model

may differ slightly from the images shown. Alternate diagrams are shown

when necessary to explain the differences between models.

Additionally, differences due to multiple checkstand types and options may be present.

Introduction

2 Jade™ X7 Portal Scanner

Scanner Features

The major parts of the scanner are shown below. Access to the Lower Assembly is dependent upon

how the system integrator or manufacturer has designed your checkstand. Ideally, entry panels have

been built in that allow easy visibility and access to the necessary parts and features.

Figure 2. Scanner Features

Entry Arch

Exit Arch

Lower Assembly

System

Bottom Scanner

Control Box

Product

Flow

-OR-

Operation

Quick Reference Guide 3

Operation

CAUTION

Power-on

If scanner power is not already on, press the power switch located on the System Control Box to the ON

position. The illustration that follows show the ON/OFF Switch for both models. The scanner arch indi-

cator lights will then show the Startup indication (indicated by arch indicator lights blinking red, green,

blue as described on page 7). Scanner startup can take several minutes.

If the scanner is already powered on, but in Sleep Mode (indicated by arch indicator lights blinking blue),

it can be returned to Normal Operation by a host command from the POS.

Figure 3. ON / OFF Switch and Grounding Screw Location

EDCBA

POS

12V

POS

EDCBA

POS POS

12V,10.5A

CLASS 1

WIRING

-OR-

Grounding Screw

ON / OFF

Switch

(not present on all models)

Prior to powering on the Jade unit, the installer should ensure that the Jade unit

has been grounded to earth ground. Some models have a Grounding Screw (shown

in Figure 3 below). Reference the Jade X7 PRG for complete grounding and installa-

tion instructions.

Operation

4 Jade™ X7 Portal Scanner

Scanning

The surface from the conveyor belt and beneath the arches up to, and including the transition plate

constitutes the effective scanning area. Imager/cameras distributed throughout the arches “curtain”

the area within that zone for scanning items on five sides. The sixth side (bottom) of an item is scanned

by the upward-facing optics (bottom scanner) beneath the transition plate.

Items for purchase are placed in the queuing zone of the conveyor belt, then swiftly carried by the con-

veyor through the scanning arches and over the transition plate. Once the item has passed through the

scanner, it is ready to accept another item. Since this process takes only seconds, the queuing area is

cleared and ready for another item almost immediately.

NOTE

Scan Zone: Arches

Scan Zone:

Bottom Scanner

Transition Plate

Control Panel

Depending on your model, the Control Panel is located either below or above the System Control Box.

The Control Panel is part of the Lower Assembly and is accessed by sliding it out from the unit.

Control Panel Functions include but are not limited to visual display for the internal computer running

the Scanner software.

Control Panel

-OR-

Items are placed on the belt without regard to whether the bar code for the previ-

ously placed item was successfully read. The scanner will use ViPR object recogni-

tion technology in an attempt to recognize any unread items. If an item remains

unidentified, image and object information are sent to the POS so that the item can

be added to the transaction manually or by some other means.

Maintenance

Quick Reference Guide 5

Maintenance

Cleaning

The scanner will provide dependable service for many years. The following maintenance procedures will

keep your scanner operating at peak performance.

Whenever needed, gently clean the transparent surfaces of the arches, the bottom scanner debris tray

and the transition plate glass using paper towels or lint-free cleaning tissues dampened with a non-

abrasive, mild, water-based glass cleaner (as shown in the inset). The other surfaces can also be

cleaned using the same cleaning agents. Do not allow fluids to flow into the internal parts of the scan-

ner.

CAUTION

Figure 4. Cleaning the Scan Windows, Debris Tray and Transition Plate Glass

NOTE

DO NOT use abrasive pads or cleaning agents.

DO NOT spray or pour liquids directly onto the scanner.

The Portal Scanner will send an alert message when the bottom scanner debris

tray and transition glass are in need of cleaning.

Maintenance

6 Jade™ X7 Portal Scanner

Spillage

Inevitably, packages placed on the conveyor belt will break open or bottles will leak. In anticipation of

this problem, the scanner has been designed to channel the flow of spillage through less-vulnerable

areas. Figure 5 shows how a leakage is routed by the Debris Tray/Window toward the outside of the

unit, then through a drain hole into a container placed to collect it. This container, of course, must be

periodically checked and emptied.

Figure 5. Provisions for Spillage

END SIDE

Debris Tray/

Window

Liquid and Debris Spillage

Drain Hole

Spillage

Container

Debris Tray/Window

A Debris Tray/Window is located just beneath the transition plate. The tray acts to collect and route

any spillage from the conveyor belt area and protect the bottom scanner from contamination. For best

scan performance it is important to regularly check and clean the Debris Tray/Window to ensure the

Bottom Scanner optics are never obscured.

Figure 6. Removing/Reinstalling the Debris Tray/Window

Debris Tray/Window

Indice

Altri manuali Datalogic Scanner

Datalogic

Datalogic DS1500 Manuale utente

Datalogic

Datalogic MAGELLAN 8400 Manuale utente

Datalogic

Datalogic DLL5000 Series Manuale utente

Datalogic

Datalogic MAGELLAN 3410VSi Guida rapida alla configurazione

Datalogic

Datalogic HandScanner MR Manuale utente

Datalogic

Datalogic AREX Manuale utente

Datalogic

Datalogic Magellan 1100i Manuale utente

Datalogic

Datalogic MAGELLAN 8300 Manuale di installazione e funzionamento

Datalogic

Datalogic Gryphon GPS4421 Manuale utente

Datalogic

Datalogic LS2200-1 Series Manuale utente

Datalogic

Datalogic DS6300 Manuale utente

Datalogic

Datalogic CATCHER D531 Series Manuale utente

Datalogic

Datalogic Laser Sentinel Manuale utente

Datalogic

Datalogic DS8100A Manuale utente

Datalogic

Datalogic Magellan 9800i Manuale utente

Datalogic

Datalogic DS2100N Manuale utente

Datalogic

Datalogic DS2100N Manuale utente

Datalogic

Datalogic Magellan 9800i Manuale di installazione e funzionamento

Datalogic

Datalogic HS7500 Manuale utente

Datalogic

Datalogic Magellan 3400VSi Manuale utente

Datalogic

Datalogic PreScan Manuale utente

Datalogic

Datalogic Falcon 4410 Manuale di installazione e funzionamento

Datalogic

Datalogic Magellan 9800i Manuale utente

Datalogic

Datalogic Gryphon I GPS4400 Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente