Datapath VSN400 Series Manuale utente

Engineering the world’s best visual solutions

Quick Start Guide

VSN400 Series of Wall Controllers

WELCOME

Thank you for purchasing the Datapath

VSN400 Wall Controller. The aim of this

document is to quickly guide you through

the process of initial setup.

For detailed information, the User

Guide can be downloaded from

www.datapath.co.uk

CONTENTS

Main System

VSN400 Main chassis

Mouse/Keyboard

Accessories Pack

Mains Cable

Build Log

In addition, if any optional cards are installed:

PCIe card product leaets

Cables/Adapters as specied in the

product leaets

Each Datapath system is custom built, therefore

the number and type of input and output cards

will dier from system to system.

Accompanying this Quick Start Guide are PCIe

card product leaets which give details on

how the cards are installed and any accessories

supplied with them.

VSN400 Quick Start Guide

STEP 1 KEYBOARD AND MOUSE

Connect Keyboard and Mouse to USB Ports.

USB ports can be found on the front and rear

of the chassis.

STEP 2 CONNECT TO A NETWORK OPTIONAL

If the VSN400 is to be used over a network, connect it to a network point

(cables not supplied) using one of the LAN connectors on the rear panel.

Network Cable not supplied.

VSN400 Quick Start Guide

STEP 3 CONNECT INPUT SOURCE

Each Datapath system is custom built. The number and type of inputs will dier

from system to system.

Contained within the documentation pack are PCIe card product leaets which

give details on how the cards are connected.

The I/O panel on your system may dier from the below illustration depending

on which motherboard option you have purchased.

To enable you to complete the initial setup of the system, displays must be

connected to the rst and second output as shown below.

Input Connectors

VSN400 Quick Start Guide

STEP 4 POWERING UP THE SYSTEM

2 2

RPSU System ATX System

1 Connect power cables then plug into a mains supply.

2 Switch on the power supply units.

3 Switch on the system.

VSN400 Quick Start Guide

STEP 5 WINDOWS 10 SETUP

Once the system has been congured in our factory the operating system is resealed,

meaning that when switching on the system for the rst time the operating system

setup commences.

You will be prompted to enter information to set up your wall controller.

There is no requirement for users to enter a product key to activate Windows 10,

activation is done automatically when connected to the internet.

You are strongly recommended to create a Restore USB Flash Drive. (See Step 8).

STEP 6 DISPLAY CONFIGURATION

Once the Windows setup is complete, the Display Driver Conguration Tool (DDCT) is

displayed. The DDCT will guide you, step by step, through the conguration of the graphics

outputs, enabling you to quickly create one or more video walls.

On the nal stage of the conguration, the (DDCT) will recommend the optimum way

to connect your VSN400 to your video wall displays.

You can access the conguration tool at anytime should you wish to make changes.

Right click on the desktop and select Display Driver Conguration Tool from the menu.

A full description of the Display Driver Conguration Tool can be found in the User Guide

located in the system support folder.

VSN400 Quick Start Guide

1 Indicates the servers you are able to connect to.

2 A representation of the display wall associated with the server.

STEP 7 WALLCONTROL 10 OPTIONAL

Before opening the Client interface you may need to start the Server by clicking on it in

the Programs menu. The WallControl 10 Client will only detect servers that are running.

When WallControl 10 is opened for the rst time it is strongly recommended that you

take a look through the help les prior to using the application.

Click on the display wall representation (2) to open the display wall tab.

Start | All Programs | WallControl 10 - Server

The WallControl 10 - Client

VSN400 Quick Start Guide

Sources

Display Wall

Display Wall Tab

When opened, the display wall tab shows a live representation of the physical wall and

the sources available to display on it. To place a source on the video wall, simply click on

the required source in the sources tab and drag it onto the display wall representation.

(Note: It is not possible to drag Application sources, double click to open).

The application help le contains information explaining how multiple sources can be

selected, how to use and create templates and how to save, recall and share layout les.

The WallControl 10 - Security Administration Client (Pro Version Only)

The WallControl 10 - Security Administration Client allows Administrators to assign

specic users to roles on a wall-by-wall basis. For example, a user can be assigned a role

allowing unrestricted access on one wall but assigned a role on another wall which only

allows the opening of pre-determined layouts.

Prior to the Security Client being used for the rst time, the SecurityOnO.exe program

must be run to enable security protection for the application. To run the SecurityOnO.

exe, ensure you are logged into Windows® with Administrator Rights.

Locate and double click on the SecurityOnO.exe le:

Program Files \WallControl 10\ Security Server\SecurityOnO

VSN400 Quick Start Guide

A WallControl 10 Pro serial dongle must be inserted into a vacant USB port. If the

dongle is removed or swapped, the Security Administration Client will not open

and an error message is displayed, therefore it is important the dongle is not

removed.

The WallControl 10 Security Application help le contains information on how to:

Import users from the Windows Active Directory into the database.

Create and edit roles.

Assign permissions to providers, layouts and sources giving specic roles

access to them.

Assign roles to walls.

Start | All Programs | WallControl 10 - Security Administration Client

VSN400 Quick Start Guide

STEP 8 CREATE A RESTORE USB FLASH DRIVE

To create your Restore USB Flash Drive you will need a USB memory stick with a

minimum capacity of 16GB. It is recommended that once your Restore USB Flash

Drive has been created, it is stored in a safe place accessible to personnel who may

be required to restore the system.

You will need to boot into the Windows Restore portal to begin the process of creating

your Restore USB Flash Drive.

Switch on your machine and when the boot messages display the Choose an

operating system screen, use the cursor keys to select Windows Restore as shown in

the following dialogue.

It should be noted that the dialogue is only displayed briey, approximately 3 seconds.

VSN400 Quick Start Guide

Altri manuali per VSN400 Series

Indice

Altri manuali Datapath Controllori

Datapath

Datapath VSN Series Manuale utente

Datapath

Datapath VSNMicro N600 Manuale utente

Datapath

Datapath x Series Manuale utente

Datapath

Datapath VSN Series Manuale utente

Datapath

Datapath Fx4 Manuale utente

Datapath

Datapath VSN900 Series Manuale utente

Datapath

Datapath VSN450 Manuale utente

Datapath

Datapath VSN Series Manuale utente

Datapath

Datapath iolite 600 Manuale utente

Datapath

Datapath VSN 600 MICRO Manuale utente

Datapath

Datapath Fx4 Manuale utente

Datapath

Datapath HX4 Manuale utente

Datapath

Datapath VSN400 Series Manuale utente

Datapath

Datapath X4 Manuale utente

Datapath

Datapath Aetria WallControl VSN Series Manuale utente

Datapath

Datapath Fx4/H Manuale utente

Datapath

Datapath iolite 12i Manuale utente

Datapath

Datapath X4 Manuale utente

Datapath

Datapath VSN V3 Manuale utente

Datapath

Datapath VSN870 Manuale utente

Datapath

Datapath X4 Manuale utente

Datapath

Datapath VSN400 Series Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente